| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1599572841-2652-3-git-send-email-wuht06@gmail.com>
Date: Tue, 8 Sep 2020 21:47:21 +0800
From: Hongtao Wu <wuht06@...il.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Rob Herring <robh+dt@...nel.org>
Cc: Orson Zhai <orsonzhai@...il.com>,
Baolin Wang <baolin.wang7@...il.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Billows Wu <billows.wu@...soc.com>
Subject: [PATCH v2 2/2] PCI: sprd: Add support for Unisoc SoCs' PCIe controller
From: Billows Wu <billows.wu@...soc.com>
This series adds PCIe controller driver for Unisoc SoCs.
This controller is based on DesignWare PCIe IP.
Signed-off-by: Billows Wu <billows.wu@...soc.com>
---
drivers/pci/controller/dwc/Kconfig | 13 ++
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pcie-sprd.c | 231 +++++++++++++++++++++++++++++++++
3 files changed, 245 insertions(+)
create mode 100644 drivers/pci/controller/dwc/pcie-sprd.c
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 044a376..14e8ed9 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -311,4 +311,17 @@ config PCIE_AL
required only for DT-based platforms. ACPI platforms with the
Annapurna Labs PCIe controller don't need to enable this.
+
+config PCIE_SPRD
+ tristate "Unisoc PCIe controller - RC mode"
+ depends on ARCH_SPRD || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Unisoc PCIe controller uses the Designware core. It can be configured
+ as an Endpoint (EP) or a Root complex (RC). In order to enable RC
+ mode, PCIE_SPRD must be selected.
+ Say Y or M here if you want to PCIe RC controller support on Unisoc
+ SoCs.
+
endmenu
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a751553..eb546e9 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_PCI_MESON) += pci-meson.o
obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
+obj-$(CONFIG_PCIE_SPRD) += pcie-sprd.o
# The following drivers are for devices that use the generic ACPI
# pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pcie-sprd.c b/drivers/pci/controller/dwc/pcie-sprd.c
new file mode 100644
index 0000000..f5989ab
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-sprd.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Unisoc SoCs
+ *
+ * Copyright (C) 2020 Unisoc, Inc.
+ *
+ * Author: Billows Wu <Billows.Wu@...soc.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include "pcie-designware.h"
+
+#define NUM_OF_ARGS 5
+
+struct sprd_pcie {
+ struct dw_pcie pci;
+};
+
+static int sprd_pcie_syscon_setting(struct platform_device *pdev, char *env)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int i, count, err;
+ u32 type, delay, reg, mask, val, tmp_val;
+ struct of_phandle_args out_args;
+ struct regmap *iomap;
+ struct device *dev = &pdev->dev;
+
+ if (!of_find_property(np, env, NULL)) {
+ dev_info(dev, "There isn't property %s in dts\n", env);
+ return 0;
+ }
+
+ count = of_property_count_elems_of_size(np, env,
+ (NUM_OF_ARGS + 1) * sizeof(u32));
+ dev_info(dev, "Property (%s) reg count is %d :\n", env, count);
+
+ for (i = 0; i < count; i++) {
+ err = of_parse_phandle_with_fixed_args(np, env, NUM_OF_ARGS,
+ i, &out_args);
+ if (err < 0)
+ return err;
+
+ type = out_args.args[0];
+ delay = out_args.args[1];
+ reg = out_args.args[2];
+ mask = out_args.args[3];
+ val = out_args.args[4];
+
+ iomap = syscon_node_to_regmap(out_args.np);
+
+ switch (type) {
+ case 0:
+ regmap_update_bits(iomap, reg, mask, val);
+ break;
+
+ case 1:
+ regmap_read(iomap, reg, &tmp_val);
+ tmp_val &= (~mask);
+ tmp_val |= (val & mask);
+ regmap_write(iomap, reg, tmp_val);
+ break;
+ default:
+ break;
+ }
+
+ if (delay)
+ usleep_range(delay, delay + 10);
+
+ regmap_read(iomap, reg, &tmp_val);
+ dev_dbg(&pdev->dev,
+ "%2d:reg[0x%8x] mask[0x%8x] val[0x%8x] result[0x%8x]\n",
+ i, reg, mask, val, tmp_val);
+ }
+
+ return i;
+}
+
+static int sprd_pcie_perst_assert(struct platform_device *pdev)
+{
+ return sprd_pcie_syscon_setting(pdev, "sprd,pcie-perst-assert");
+}
+
+static int sprd_pcie_perst_deassert(struct platform_device *pdev)
+{
+ return sprd_pcie_syscon_setting(pdev, "sprd,pcie-perst-deassert");
+}
+
+static int sprd_pcie_power_on(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+
+ ret = sprd_pcie_syscon_setting(pdev, "sprd,pcie-poweron-syscons");
+ if (ret < 0)
+ dev_err(dev,
+ "failed to set pcie poweroff syscons, return %d\n",
+ ret);
+
+ sprd_pcie_perst_deassert(pdev);
+
+ return ret;
+}
+
+static int sprd_pcie_power_off(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+
+ sprd_pcie_perst_assert(pdev);
+
+ ret = sprd_pcie_syscon_setting(pdev, "sprd,pcie-poweroff-syscons");
+ if (ret < 0)
+ dev_err(dev,
+ "failed to set pcie poweroff syscons, return %d\n",
+ ret);
+
+ return ret;
+}
+
+static int sprd_pcie_host_init(struct pcie_port *pp)
+{
+ int ret;
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+
+ dw_pcie_setup_rc(pp);
+ dw_pcie_msi_init(pp);
+
+ ret = dw_pcie_wait_for_link(pci);
+ if (ret)
+ dev_err(pci->dev, "pcie ep may has not been powered on yet\n");
+
+ return ret;
+}
+
+static const struct dw_pcie_host_ops sprd_pcie_host_ops = {
+ .host_init = sprd_pcie_host_init,
+};
+
+static int sprd_add_pcie_port(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sprd_pcie *ctrl = platform_get_drvdata(pdev);
+ struct dw_pcie *pci = &ctrl->pci;
+ struct pcie_port *pp = &pci->pp;
+
+ pci->dbi_base = devm_platform_ioremap_resource_byname(pdev, "dbi");
+ if (IS_ERR(pci->dbi_base)) {
+ dev_err(dev, "failed to get rc dbi base\n");
+ return PTR_ERR(pci->dbi_base);
+ }
+
+ pp->ops = &sprd_pcie_host_ops;
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ pp->msi_irq = platform_get_irq_byname(pdev, "msi");
+ if (pp->msi_irq < 0) {
+ dev_err(dev, "failed to get msi, return %d\n",
+ pp->msi_irq);
+ return pp->msi_irq;
+ }
+ }
+
+ return dw_pcie_host_init(pp);
+}
+
+static int sprd_pcie_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sprd_pcie *ctrl;
+ struct dw_pcie *pci;
+ int ret;
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ pci = &ctrl->pci;
+ pci->dev = dev;
+
+ platform_set_drvdata(pdev, ctrl);
+
+ ret = sprd_pcie_power_on(pdev);
+ if (ret < 0) {
+ dev_err(dev, "failed to get pcie poweron syscons, return %d\n",
+ ret);
+ goto err_power_off;
+ }
+
+ ret = sprd_add_pcie_port(pdev);
+ if (ret) {
+ dev_warn(dev, "failed to initialize RC controller\n");
+ return ret;
+ }
+
+ return 0;
+
+err_power_off:
+ sprd_pcie_power_off(pdev);
+
+ return ret;
+}
+
+static const struct of_device_id sprd_pcie_of_match[] = {
+ {
+ .compatible = "sprd,pcie-rc",
+ },
+ {},
+};
+
+static struct platform_driver sprd_pcie_driver = {
+ .probe = sprd_pcie_probe,
+ .driver = {
+ .name = "sprd-pcie",
+ .of_match_table = sprd_pcie_of_match,
+ },
+};
+
+module_platform_driver(sprd_pcie_driver);
+
+MODULE_DESCRIPTION("Unisoc PCIe host controller driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Powered by blists - more mailing lists