| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_JsqJ0sBK0pSDec3KBwNNq9metxn2x1-O9ANzPOktboRxc1A@mail.gmail.com>
Date: Mon, 14 Sep 2020 08:32:17 -0600
From: Rob Herring <robh@...nel.org>
To: Jianjun Wang <jianjun.wang@...iatek.com>
Cc: devicetree@...r.kernel.org,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
PCI <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Sj Huang <sj.huang@...iatek.com>,
Ryder Lee <ryder.lee@...iatek.com>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Bjorn Helgaas <bhelgaas@...gle.com>,
David Miller <davem@...emloft.net>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [v2,2/3] PCI: mediatek: Add new generation controller support
On Mon, Sep 14, 2020 at 5:07 AM Jianjun Wang <jianjun.wang@...iatek.com> wrote:
>
> On Fri, 2020-09-11 at 16:44 -0600, Rob Herring wrote:
> > On Thu, Sep 10, 2020 at 11:45:35AM +0800, Jianjun Wang wrote:
> > > MediaTek's PCIe host controller has three generation HWs, the new
> > > generation HW is an individual bridge, it supoorts Gen3 speed and
> > > up to 256 MSI interrupt numbers for multi-function devices.
> > >
> > > Add support for new Gen3 controller which can be found on MT8192.
> > >
> > > Signed-off-by: Jianjun Wang <jianjun.wang@...iatek.com>
> > > Acked-by: Ryder Lee <ryder.lee@...iatek.com>
> > > ---
> > > drivers/pci/controller/Kconfig | 14 +
> > > drivers/pci/controller/Makefile | 1 +
> > > drivers/pci/controller/pcie-mediatek-gen3.c | 1076 +++++++++++++++++++
> > > 3 files changed, 1091 insertions(+)
> > > create mode 100644 drivers/pci/controller/pcie-mediatek-gen3.c
> > >
> > > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> > > index f18c3725ef80..83daa772595b 100644
> > > --- a/drivers/pci/controller/Kconfig
> > > +++ b/drivers/pci/controller/Kconfig
> > > @@ -239,6 +239,20 @@ config PCIE_MEDIATEK
> > > Say Y here if you want to enable PCIe controller support on
> > > MediaTek SoCs.
> > >
> > > +config PCIE_MEDIATEK_GEN3
> > > + tristate "MediaTek GEN3 PCIe controller"
> > > + depends on ARCH_MEDIATEK || COMPILE_TEST
> > > + depends on OF
> > > + depends on PCI_MSI_IRQ_DOMAIN
> > > + help
> > > + Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
> > > + This PCIe controller provides the capable of Gen3, Gen2 and
> > > + Gen1 speed, and support up to 256 MSI interrupt numbers for
> > > + multi-function devices.
> > > +
> > > + Say Y here if you want to enable Gen3 PCIe controller support on
> > > + MediaTek SoCs.
> > > +
> > > config PCIE_TANGO_SMP8759
> > > bool "Tango SMP8759 PCIe controller (DANGEROUS)"
> > > depends on ARCH_TANGO && PCI_MSI && OF
> > > diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> > > index bcdbf49ab1e4..9c1b96777597 100644
> > > --- a/drivers/pci/controller/Makefile
> > > +++ b/drivers/pci/controller/Makefile
> > > @@ -27,6 +27,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
> > > obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
> > > obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
> > > obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
> > > +obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o
> > > obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> > > obj-$(CONFIG_VMD) += vmd.o
> > > obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
> > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > new file mode 100644
> > > index 000000000000..f8c8bdf88d33
> > > --- /dev/null
> > > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > @@ -0,0 +1,1076 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * MediaTek PCIe host controller driver.
> > > + *
> > > + * Copyright (c) 2020 MediaTek Inc.
> > > + * Author: Jianjun Wang <jianjun.wang@...iatek.com>
> > > + */
> > > +
> > > +#include <linux/clk.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/iopoll.h>
> > > +#include <linux/irq.h>
> > > +#include <linux/irqchip/chained_irq.h>
> > > +#include <linux/irqdomain.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/module.h>
> > > +#include <linux/msi.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/of_clk.h>
> > > +#include <linux/of_pci.h>
> > > +#include <linux/of_platform.h>
> > > +#include <linux/pci.h>
> > > +#include <linux/phy/phy.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/pm_domain.h>
> > > +#include <linux/pm_runtime.h>
> > > +#include <linux/reset.h>
> > > +
> > > +#include "../pci.h"
> > > +
> > > +#define PCIE_SETTING_REG 0x80
> > > +#define PCIE_PCI_IDS_1 0x9c
> > > +#define PCI_CLASS(class) (class << 8)
> > > +#define PCIE_RC_MODE BIT(0)
> > > +
> > > +#define PCIE_CFGNUM_REG 0x140
> > > +#define PCIE_CFG_DEVFN(devfn) ((devfn) & GENMASK(7, 0))
> > > +#define PCIE_CFG_BUS(bus) (((bus) << 8) & GENMASK(15, 8))
> > > +#define PCIE_CFG_BYTE_EN(bytes) (((bytes) << 16) & GENMASK(19, 16))
> > > +#define PCIE_CFG_FORCE_BYTE_EN BIT(20)
> > > +#define PCIE_CFG_OFFSET_ADDR 0x1000
> > > +#define PCIE_CFG_HEADER(devfn, bus) \
> > > + (PCIE_CFG_DEVFN(devfn) | PCIE_CFG_BUS(bus))
> > > +
> > > +#define PCIE_CFG_HEADER_FORCE_BE(devfn, bus, bytes) \
> > > + (PCIE_CFG_HEADER(devfn, bus) | PCIE_CFG_BYTE_EN(bytes) \
> > > + | PCIE_CFG_FORCE_BYTE_EN)
> > > +
> > > +#define PCIE_RST_CTRL_REG 0x148
> > > +#define PCIE_MAC_RSTB BIT(0)
> > > +#define PCIE_PHY_RSTB BIT(1)
> > > +#define PCIE_BRG_RSTB BIT(2)
> > > +#define PCIE_PE_RSTB BIT(3)
> > > +
> > > +#define PCIE_MISC_STATUS_REG 0x14C
> > > +#define PCIE_LTR_MSG_RECEIVED BIT(0)
> > > +#define PCIE_PCIE_MSG_RECEIVED BIT(1)
> > > +
> > > +#define PCIE_LTSSM_STATUS_REG 0x150
> > > +#define PCIE_LTSSM_STATE_MASK GENMASK(28, 24)
> > > +#define PCIE_LTSSM_STATE(val) ((val & PCIE_LTSSM_STATE_MASK) >> 24)
> > > +#define PCIE_LTSSM_STATE_L0 0x10
> > > +#define PCIE_LTSSM_STATE_L1_IDLE 0x13
> > > +#define PCIE_LTSSM_STATE_L2_IDLE 0x14
> > > +
> > > +#define PCIE_LINK_STATUS_REG 0x154
> > > +#define PCIE_PORT_LINKUP BIT(8)
> > > +
> > > +#define PCIE_MSI_SET_NUM 8
> > > +#define PCIE_MSI_IRQS_PER_SET 32
> > > +#define PCIE_MSI_IRQS_NUM \
> > > + (PCIE_MSI_IRQS_PER_SET * (PCIE_MSI_SET_NUM))
> > > +
> > > +#define PCIE_INT_ENABLE_REG 0x180
> > > +#define PCIE_MSI_MASK GENMASK(PCIE_MSI_SET_NUM + 8 - 1, 8)
> > > +#define PCIE_MSI_SHIFT 8
> > > +#define PCIE_INTX_SHIFT 24
> > > +#define PCIE_INTX_MASK GENMASK(27, 24)
> > > +#define PCIE_MSG_MASK BIT(28)
> > > +#define PCIE_AER_MASK BIT(29)
> > > +#define PCIE_PM_MASK BIT(30)
> > > +
> > > +#define PCIE_INT_STATUS_REG 0x184
> > > +#define PCIE_MSI_SET_ENABLE_REG 0x190
> > > +
> > > +#define PCIE_LOW_POWER_CTRL_REG 0x194
> > > +#define PCIE_DIS_LOWPWR_MASK GENMASK(3, 0)
> > > +#define PCIE_DIS_L0S_MASK BIT(0)
> > > +#define PCIE_DIS_L1_MASK BIT(1)
> > > +#define PCIE_DIS_L11_MASK BIT(2)
> > > +#define PCIE_DIS_L12_MASK BIT(3)
> > > +#define PCIE_FORCE_DIS_LOWPWR GENMASK(11, 8)
> > > +#define PCIE_FORCE_DIS_L0S BIT(8)
> > > +#define PCIE_FORCE_DIS_L1 BIT(9)
> > > +#define PCIE_FORCE_DIS_L11 BIT(10)
> > > +#define PCIE_FORCE_DIS_L12 BIT(11)
> > > +
> > > +#define PCIE_ICMD_PM_REG 0x198
> > > +#define PCIE_TURN_OFF_LINK BIT(4)
> > > +
> > > +#define PCIE_MSI_ADDR_BASE_REG 0xc00
> > > +#define PCIE_MSI_SET_OFFSET 0x10
> > > +#define PCIE_MSI_STATUS_OFFSET 0x04
> > > +#define PCIE_MSI_ENABLE_OFFSET 0x08
> > > +
> > > +#define PCIE_TRANS_TABLE_BASE_REG 0x800
> > > +#define PCIE_ATR_SRC_ADDR_MSB_OFFSET 0x4
> > > +#define PCIE_ATR_TRSL_ADDR_LSB_OFFSET 0x8
> > > +#define PCIE_ATR_TRSL_ADDR_MSB_OFFSET 0xc
> > > +#define PCIE_ATR_TRSL_PARAM_OFFSET 0x10
> > > +#define PCIE_ATR_TLB_SET_OFFSET 0x20
> > > +
> > > +#define PCIE_MAX_TRANS_TABLES 8
> > > +#define ATR_EN BIT(0)
> > > +#define ATR_SIZE(size) ((((size) - 1) << 1) & GENMASK(6, 1))
> > > +#define ATR_ID(id) (id & GENMASK(3, 0))
> > > +#define ATR_PARAM(param) (((param) << 16) & GENMASK(27, 16))
> > > +
> > > +/**
> > > + * struct mtk_pcie_msi - MSI information for each set
> > > + * @base: IO mapped register base
> > > + * @hwirq: Hardware interrupt number
> > > + * @irq: MSI set Interrupt number
> > > + * @index: MSI set number
> > > + * @msg_addr: MSI message address
> > > + * @domain: IRQ domain
> > > + */
> > > +struct mtk_pcie_msi {
> > > + void __iomem *base;
> > > + int hwirq;
> > > + int irq;
> > > + int index;
> > > + phys_addr_t msg_addr;
> > > + struct irq_domain *domain;
> > > +};
> > > +
> > > +/**
> > > + * struct mtk_pcie_port - PCIe port information
> > > + * @dev: PCIe device
> > > + * @base: IO mapped register base
> > > + * @reg_base: Physical register base
> > > + * @mac_reset: mac reset control
> > > + * @phy_reset: phy reset control
> > > + * @phy: PHY controller block
> > > + * @clks: PCIe clocks
> > > + * @num_clks: PCIe clocks count for this port
> > > + * @is_suspended: device suspend state
> > > + * @irq: PCIe controller interrupt number
> > > + * @intx_domain: legacy INTx IRQ domain
> > > + * @msi_domain: MSI IRQ domain
> > > + * @msi_top_domain: MSI IRQ top domain
> > > + * @msi_info: MSI sets information
> > > + * @lock: lock protecting IRQ bit map
> > > + * @msi_irq_in_use: bit map for assigned MSI IRQ
> > > + */
> > > +struct mtk_pcie_port {
> > > + struct device *dev;
> > > + void __iomem *base;
> > > + phys_addr_t reg_base;
> > > + struct reset_control *mac_reset;
> > > + struct reset_control *phy_reset;
> > > + struct phy *phy;
> > > + struct clk **clks;
> > > + int num_clks;
> > > + bool is_suspended;
> > > +
> > > + int irq;
> > > + struct irq_domain *intx_domain;
> > > + struct irq_domain *msi_domain;
> > > + struct irq_domain *msi_top_domain;
> > > + struct mtk_pcie_msi **msi_info;
> > > + struct mutex lock;
> > > + DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
> > > +};
> > > +
> > > +static int mtk_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> > > + int where, int size, u32 *val)
> > > +{
> > > + struct mtk_pcie_port *port = bus->sysdata;
> > > + int bytes;
> > > +
> > > + bytes = ((1 << size) - 1) << (where & 0x3);
> > > + writel(PCIE_CFG_HEADER_FORCE_BE(devfn, bus->number, bytes),
> > > + port->base + PCIE_CFGNUM_REG);
> > > +
> > > + *val = readl(port->base + PCIE_CFG_OFFSET_ADDR + (where & ~0x3));
> > > +
> > > + if (size <= 2)
> > > + *val = (*val >> (8 * (where & 0x3))) & ((1 << (size * 8)) - 1);
> > > +
> > > + return PCIBIOS_SUCCESSFUL;
> > > +}
> > > +
> > > +static int mtk_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> > > + int where, int size, u32 val)
> > > +{
> > > + struct mtk_pcie_port *port = bus->sysdata;
> > > + int bytes;
> > > +
> > > + bytes = ((1 << size) - 1) << (where & 0x3);
> > > + writel(PCIE_CFG_HEADER_FORCE_BE(devfn, bus->number, bytes),
> > > + port->base + PCIE_CFGNUM_REG);
> > > +
> > > + if (size <= 2)
> > > + val = (val & ((1 << (size * 8)) - 1)) << ((where & 0x3) * 8);
> > > +
> > > + writel(val, port->base + PCIE_CFG_OFFSET_ADDR + (where & ~0x3));
> > > +
> > > + return PCIBIOS_SUCCESSFUL;
> > > +}
> > > +
> > > +static struct pci_ops mtk_pcie_ops = {
> > > + .read = mtk_pcie_config_read,
> > > + .write = mtk_pcie_config_write,
> > > +};
> > > +
> > > +static void mtk_pcie_set_trans_window(void __iomem *reg,
> > > + resource_size_t cpu_addr,
> > > + resource_size_t pci_addr, size_t size)
> > > +{
> > > + writel(lower_32_bits(cpu_addr) | ATR_SIZE(fls(size) - 1) | ATR_EN, reg);
> > > + writel(upper_32_bits(cpu_addr), reg + PCIE_ATR_SRC_ADDR_MSB_OFFSET);
> > > + writel(lower_32_bits(pci_addr), reg + PCIE_ATR_TRSL_ADDR_LSB_OFFSET);
> > > + writel(upper_32_bits(pci_addr), reg + PCIE_ATR_TRSL_ADDR_MSB_OFFSET);
> > > + writel(ATR_ID(0) | ATR_PARAM(0), reg + PCIE_ATR_TRSL_PARAM_OFFSET);
> > > +}
> > > +
> > > +static int mtk_pcie_set_trans_table(void __iomem *reg,
> > > + resource_size_t cpu_addr,
> > > + resource_size_t pci_addr, size_t size,
> > > + int num)
> > > +{
> > > + void __iomem *table_base;
> > > +
> > > + if (num > PCIE_MAX_TRANS_TABLES)
> > > + return -ENODEV;
> > > +
> > > + table_base = reg + num * PCIE_ATR_TLB_SET_OFFSET;
> > > + mtk_pcie_set_trans_window(table_base, cpu_addr, pci_addr, size);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
> > > +{
> > > + struct resource_entry *entry;
> > > + struct pci_host_bridge *host = pci_host_bridge_from_priv(port);
> > > + u32 val;
> > > + int err = 0, table_index = 0;
> > > +
> > > + /* Set as RC mode */
> > > + val = readl(port->base + PCIE_SETTING_REG);
> > > + val |= PCIE_RC_MODE;
> > > + writel(val, port->base + PCIE_SETTING_REG);
> > > +
> > > + /* Set class code */
> > > + val = readl(port->base + PCIE_PCI_IDS_1);
> > > + val &= ~GENMASK(31, 8);
> > > + val |= PCI_CLASS(PCI_CLASS_BRIDGE_PCI << 8);
> > > + writel(val, port->base + PCIE_PCI_IDS_1);
> > > +
> > > + /* Assert all reset signals */
> > > + val = readl(port->base + PCIE_RST_CTRL_REG);
> > > + val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB;
> > > + writel(val, port->base + PCIE_RST_CTRL_REG);
> > > +
> > > + /* De-assert reset signals*/
> > > + val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB);
> > > + writel(val, port->base + PCIE_RST_CTRL_REG);
> > > +
> > > + usleep_range(100 * 1000, 120 * 1000);
> >
> > Seems like a long delay...
>
> Yes, it's truly a long delay, the PCI Express Card Electromechanical
> Specification suggests that the de-assertion of PERST# should be delayed
> 100ms to wait the reference clocks become stable.I will discuss with the
> designers to check if we really need that long time and try to make it
> shorter.
Just add a comment as to what the delay is for or based on.
[...]
> > > +static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
> >
> > Why do you need the noirq variant?
>
> I think the suspend of bus controller should be the last callback
> function which will be called, so I add noirq variant to make sure it's
> called after the device driver's suspend function.
The Linux driver model will ensure that. Child devices will be
suspended before the parent. If there's some non parent-child
dependency, that should get handled with devlinks.
Rob
Powered by blists - more mailing lists