[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200917065949.3476-1-narmstrong@baylibre.com>
Date: Thu, 17 Sep 2020 08:59:44 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: khilman@...libre.com, kishon@...com, balbi@...nel.org,
martin.blumenstingl@...glemail.com
Cc: linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Neil Armstrong <narmstrong@...libre.com>,
linux-usb@...r.kernel.org
Subject: [PATCH v2 0/5] usb: dwc-meson-g12a: Add support for USB on S400 board
The Amlogic AXG is close to the GXL Glue but with a single OTG PHY.
It needs the same init sequence as GXL & GXM, but it seems it doesn't need
the host disconnect bit.
The Glue driver reuses the already implemented GXL & GXM work.
The USB2 PHY driver needs a slight tweak to keep the OTG detection working.
Changes since v1 at [1]:
- s/close from/close to/g
- collected review tags
- added small comment about phy management in patch 3
- removed status = "okay" in patch 4
- removed invalid phy-supply of phy1 in patch 5
[1] http://lore.kernel.org/r/20200909160409.8678-1-narmstrong@baylibre.com
Neil Armstrong (5):
phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG
Families USB Glue Bindings
usb: dwc-meson-g12a: Add support for USB on AXG SoCs
arm64: dts: meson-axg: add USB nodes
arm64: dts: meson-axg-s400: enable USB OTG
.../usb/amlogic,meson-g12a-usb-ctrl.yaml | 22 +++++++-
.../arm64/boot/dts/amlogic/meson-axg-s400.dts | 6 +++
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 50 +++++++++++++++++++
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 +-
drivers/usb/dwc3/dwc3-meson-g12a.c | 18 +++++++
5 files changed, 97 insertions(+), 2 deletions(-)
--
2.22.0
Powered by blists - more mailing lists