linux-kernel - Re: [PATCH v2] arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <c36dbcd7-4492-3598-68c0-f4aea1c1dabf@codeaurora.org>
Date:   Fri, 18 Sep 2020 17:21:37 +0530
From:   Srinivasa Rao Mandadapu <srivasam@...eaurora.org>
To:     Doug Anderson <dianders@...omium.org>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
        Rohit kumar <rohitkr@...eaurora.org>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Ajit Pandey <ajitp@...eaurora.org>,
        Cheng-Yi Chiang <cychiang@...omium.org>
Subject: Re: [PATCH v2] arm64: dts: qcom: sc7180: Add lpass cpu node for I2S
 driver

Thanks Mr. Doug for your time to review this patch!!

On 9/14/2020 11:11 PM, Doug Anderson wrote:
> Hi,
>
> On Tue, Sep 1, 2020 at 9:04 PM Srinivasa Rao Mandadapu
> <srivasam@...eaurora.org> wrote:
>> From: Ajit Pandey <ajitp@...eaurora.org>
>>
>> Add the I2S controller node to sc7180 dtsi.
>> Add pinmux for primary and secondary I2S.
>>
>> Signed-off-by: Ajit Pandey <ajitp@...eaurora.org>
>> Signed-off-by: Cheng-Yi Chiang <cychiang@...omium.org>
>> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@...eaurora.org>
>> ---
>>
>>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 69 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 69 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index d46b383..db60ca5 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -676,6 +676,36 @@
>>                          };
>>                  };
>>
>> +               lpass_cpu: lpass@...00000 {
>> +                       compatible = "qcom,sc7180-lpass-cpu";
>> +
>> +                       reg = <0 0x62f00000 0 0x29000>;
>> +                       reg-names = "lpass-lpaif";
>> +
>> +                       iommus = <&apps_smmu 0x1020 0>;
>> +
>> +                       power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
>> +
>> +                       clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
>> +                                <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
>> +                                <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
>> +                                <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
>> +                                <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
>> +                                <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
>> +
>> +                       clock-names = "pcnoc-sway-clk", "audio-core",
>> +                                       "mclk0", "pcnoc-mport-clk",
>> +                                       "mi2s-bit-clk0", "mi2s-bit-clk1";
>> +
>> +
>> +                       #sound-dai-cells = <1>;
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "lpass-irq-lpaif";
>> +               };
>> +
>>                  sdhc_1: sdhci@...000 {
> Your node is still sorted incorrectly.  Nodes with unit addresses
> should be sorted numerically.
>
> The number 0x62f00000 is greater than the number 0x7c4000.  Thus your
> node should not be placed above "sdhci@...000".  It should be placed
> somewhere further down in the file.

Will place it accordingly.

>
>
>>                          compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
>>                          reg = <0 0x7c4000 0 0x1000>,
>> @@ -1721,6 +1751,45 @@
>>                                  };
>>                          };
>>
>> +                       sec_mi2s_active: sec-mi2s-active {
>> +                               pinmux {
>> +                                       pins = "gpio49", "gpio50", "gpio51";
>> +                                       function = "mi2s_1";
>> +                               };
>> +
>> +                               pinconf {
>> +                                       pins = "gpio49", "gpio50", "gpio51";;
> nit: double-semi-colon.

-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.