linux-kernel - Re: [PATCH v3] arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200918152009.GQ1893@yoga>
Date:   Fri, 18 Sep 2020 10:20:09 -0500
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Srinivasa Rao Mandadapu <srivasam@...eaurora.org>
Cc:     agross@...nel.org, robh+dt@...nel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, rohitkr@...eaurora.org,
        srinivas.kandagatla@...aro.org, Ajit Pandey <ajitp@...eaurora.org>,
        Cheng-Yi Chiang <cychiang@...omium.org>,
        V Sujith Kumar Reddy <vsujithk@...eaurora.org>
Subject: Re: [PATCH v3] arm64: dts: qcom: sc7180: Add lpass cpu node for I2S
 driver

On Fri 18 Sep 08:17 CDT 2020, Srinivasa Rao Mandadapu wrote:

> From: Ajit Pandey <ajitp@...eaurora.org>
> 
> Add the I2S controller node to sc7180 dtsi.
> Add pinmux for primary and secondary I2S.
> 
> Signed-off-by: Ajit Pandey <ajitp@...eaurora.org>
> Signed-off-by: Cheng-Yi Chiang <cychiang@...omium.org>
> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@...eaurora.org>
> Signed-off-by: V Sujith Kumar Reddy <vsujithk@...eaurora.org>

Each s-o-b is a statement that this patch conforms to the license
requirements of the Linux project. As such it describes the history of
how this patch reached this point; starting with Ajit writing the patch,
Cheng-Yi handling it, then you and finally Sujith.

You sending the patch would indicate that you handled it last, so your
certification should be last (and if Sujith handled the patch inbetween
you should be listed twice).

Please read https://www.kernel.org/doc/html/latest/process/submitting-patches.html?highlight=certificate#sign-your-work-the-developer-s-certificate-of-origin

Regards,
Bjorn

> ---
> Changes since v1:
>    -- Updated I2S pin control nodes  with grouping common pin controls
>    -- Updated lpass_cpu node with proper control names
> Changes since v2:
>    -- The plement of lpass_cpu node is changed
>  
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 69 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 69 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6678f1e..59c39cf 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1742,6 +1742,45 @@
>  				};
>  			};
>  
> +			sec_mi2s_active: sec-mi2s-active {
> +				pinmux {
> +					pins = "gpio49", "gpio50", "gpio51";
> +					function = "mi2s_1";
> +				};
> +
> +				pinconf {
> +					pins = "gpio49", "gpio50", "gpio51";;
> +					drive-strength = <8>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			pri_mi2s_active: pri-mi2s-active {
> +				pinmux {
> +					pins = "gpio53", "gpio54", "gpio55", "gpio56";
> +					function = "mi2s_0";
> +				};
> +
> +				pinconf {
> +					pins = "gpio53", "gpio54", "gpio55", "gpio56";
> +					drive-strength = <8>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			pri_mi2s_mclk_active: pri-mi2s-mclk-active {
> +				pinmux {
> +					pins = "gpio57";
> +					function = "lpass_ext";
> +				};
> +
> +				pinconf {
> +					pins = "gpio57";
> +					drive-strength = <8>;
> +					bias-pull-up;
> +				};
> +			};
> +
>  			sdc1_on: sdc1-on {
>  				pinconf-clk {
>  					pins = "sdc1_clk";
> @@ -3389,6 +3428,36 @@
>  			#power-domain-cells = <1>;
>  		};
>  
> +		lpass_cpu: lpass@...00000 {
> +			compatible = "qcom,sc7180-lpass-cpu";
> +
> +			reg = <0 0x62f00000 0 0x29000>;
> +			reg-names = "lpass-lpaif";
> +
> +			iommus = <&apps_smmu 0x1020 0>;
> +
> +			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
> +
> +			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
> +				 <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
> +				 <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
> +				 <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
> +				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
> +				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
> +
> +			clock-names = "pcnoc-sway-clk", "audio-core",
> +					"mclk0", "pcnoc-mport-clk",
> +					"mi2s-bit-clk0", "mi2s-bit-clk1";
> +
> +
> +			#sound-dai-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "lpass-irq-lpaif";
> +		};
> +
>  		lpass_hm: clock-controller@...00000 {
>  			compatible = "qcom,sc7180-lpasshm";
>  			reg = <0 0x63000000 0 0x28>;
> -- 
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>