| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHCN7xK2TQsjFUCty2TFgx9HsPMvuuSF6ae5iKCouWFsv7Npzw@mail.gmail.com>
Date: Thu, 8 Oct 2020 15:59:01 -0500
From: Adam Ford <aford173@...il.com>
To: linux-pm@...r.kernel.org, Linux-OMAP <linux-omap@...r.kernel.org>
Cc: Adam Ford-BE <aford@...conembedded.com>,
kernel test robot <lkp@...el.com>,
Andreas Kemnade <andreas@...nade.info>,
Tony Lindgren <tony@...mide.com>,
Russell King <linux@...linux.org.uk>,
Eduardo Valentin <edubezval@...il.com>,
Keerthy <j-keerthy@...com>, Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
arm-soc <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] thermal: ti-soc-thermal: Enable addition power management
On Fri, Sep 11, 2020 at 7:32 AM Adam Ford <aford173@...il.com> wrote:
>
> The bandgap sensor can be idled when the processor is too, but it
> isn't currently being done, so the power consumption of OMAP3
> boards can elevated if the bangap sensor is enabled.
>
> This patch attempts to use some additional power management
> to idle the clock to the bandgap when not needed.
>
> Signed-off-by: Adam Ford <aford173@...il.com>
> Reported-by: kernel test robot <lkp@...el.com>
> Tested-by: Andreas Kemnade <andreas@...nade.info> # GTA04
> ---
> V3: bandgap_omap_cpu_notifier is only defined when CONFIG_PM_SLEEP
> is enabled, so make all references to it also depend on
> CONFIG_PM_SLEEP as well
>
Gentle nudge on this one. It was in the queue for a while, and got
lost, then resurrected again.
thanks
adam
> V2: Fix issue where variable stating the suspend mode isn't being
> properly set and cleared.
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index ab19ceff6e2a..5e596168ba73 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -25,10 +25,20 @@
> #include <linux/of_platform.h>
> #include <linux/of_irq.h>
> #include <linux/io.h>
> +#include <linux/cpu_pm.h>
> +#include <linux/device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pm.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>
> #include "ti-bandgap.h"
>
> static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id);
> +#ifdef CONFIG_PM_SLEEP
> +static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
> + unsigned long cmd, void *v);
> +#endif
>
> /*** Helper functions to access registers and their bitfields ***/
>
> @@ -1008,6 +1018,11 @@ int ti_bandgap_probe(struct platform_device *pdev)
> }
> }
>
> +#ifdef CONFIG_PM_SLEEP
> + bgp->nb.notifier_call = bandgap_omap_cpu_notifier;
> + cpu_pm_register_notifier(&bgp->nb);
> +#endif
> +
> return 0;
>
> remove_last_cooling:
> @@ -1041,7 +1056,9 @@ int ti_bandgap_remove(struct platform_device *pdev)
> struct ti_bandgap *bgp = platform_get_drvdata(pdev);
> int i;
>
> - /* First thing is to remove sensor interfaces */
> + cpu_pm_unregister_notifier(&bgp->nb);
> +
> + /* Remove sensor interfaces */
> for (i = 0; i < bgp->conf->sensor_count; i++) {
> if (bgp->conf->sensors[i].unregister_cooling)
> bgp->conf->sensors[i].unregister_cooling(bgp, i);
> @@ -1150,9 +1167,43 @@ static int ti_bandgap_suspend(struct device *dev)
> if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
> clk_disable_unprepare(bgp->fclock);
>
> + bgp->is_suspended = true;
> +
> return err;
> }
>
> +static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
> + unsigned long cmd, void *v)
> +{
> + struct ti_bandgap *bgp;
> +
> + bgp = container_of(nb, struct ti_bandgap, nb);
> +
> + spin_lock(&bgp->lock);
> + switch (cmd) {
> + case CPU_CLUSTER_PM_ENTER:
> + if (bgp->is_suspended)
> + break;
> + ti_bandgap_save_ctxt(bgp);
> + ti_bandgap_power(bgp, false);
> + if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
> + clk_disable(bgp->fclock);
> + break;
> + case CPU_CLUSTER_PM_ENTER_FAILED:
> + case CPU_CLUSTER_PM_EXIT:
> + if (bgp->is_suspended)
> + break;
> + if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
> + clk_enable(bgp->fclock);
> + ti_bandgap_power(bgp, true);
> + ti_bandgap_restore_ctxt(bgp);
> + break;
> + }
> + spin_unlock(&bgp->lock);
> +
> + return NOTIFY_OK;
> +}
> +
> static int ti_bandgap_resume(struct device *dev)
> {
> struct ti_bandgap *bgp = dev_get_drvdata(dev);
> @@ -1161,6 +1212,7 @@ static int ti_bandgap_resume(struct device *dev)
> clk_prepare_enable(bgp->fclock);
>
> ti_bandgap_power(bgp, true);
> + bgp->is_suspended = false;
>
> return ti_bandgap_restore_ctxt(bgp);
> }
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> index fce4657e9486..ed0ea4b17b25 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> @@ -12,6 +12,10 @@
> #include <linux/spinlock.h>
> #include <linux/types.h>
> #include <linux/err.h>
> +#include <linux/cpu_pm.h>
> +#include <linux/device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pm.h>
>
> struct gpio_desc;
>
> @@ -203,6 +207,8 @@ struct ti_bandgap {
> int irq;
> struct gpio_desc *tshut_gpiod;
> u32 clk_rate;
> + struct notifier_block nb;
> + unsigned int is_suspended:1;
> };
>
> /**
> --
> 2.25.1
>
Powered by blists - more mailing lists