| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201012033150.21056-4-billy_tsai@aspeedtech.com>
Date: Mon, 12 Oct 2020 11:31:50 +0800
From: Billy Tsai <billy_tsai@...eedtech.com>
To: <robh+dt@...nel.org>, <joel@....id.au>, <andrew@...id.au>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-aspeed@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>,
<linus.walleij@...aro.org>, <bgolaszewski@...libre.com>,
<linux-gpio@...r.kernel.org>, <openbmc@...ts.ozlabs.org>
CC: <BMC-SW@...eedtech.com>
Subject: [PATCH 3/3] pinctrl: aspeed-g6: Add sgpiom2 pinctrl setting
At ast2600a1 we change feature of master sgpio to 2 sets.
So this patch is used to add the pinctrl setting of the new sgpio.
Signed-off-by: Billy Tsai <billy_tsai@...eedtech.com>
---
arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 5 ++++
drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 30 +++++++++++++++++++---
2 files changed, 31 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 7028e21bdd98..a16ecf08e307 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -862,6 +862,11 @@
groups = "SGPM1";
};
+ pinctrl_sgpm2_default: sgpm2_default {
+ function = "SGPM2";
+ groups = "SGPM2";
+ };
+
pinctrl_sgps1_default: sgps1_default {
function = "SGPS1";
groups = "SGPS1";
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 34803a6c7664..b673a44ffa3b 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -46,8 +46,10 @@
#define SCU620 0x620 /* Disable GPIO Internal Pull-Down #4 */
#define SCU634 0x634 /* Disable GPIO Internal Pull-Down #5 */
#define SCU638 0x638 /* Disable GPIO Internal Pull-Down #6 */
+#define SCU690 0x690 /* Multi-function Pin Control #24 */
#define SCU694 0x694 /* Multi-function Pin Control #25 */
#define SCU69C 0x69C /* Multi-function Pin Control #27 */
+#define SCU6D0 0x6D0 /* Multi-function Pin Control #28 */
#define SCUC20 0xC20 /* PCIE configuration Setting Control */
#define ASPEED_G6_NR_PINS 256
@@ -81,13 +83,21 @@ FUNC_GROUP_DECL(I2C12, L26, K24);
#define K26 4
SIG_EXPR_LIST_DECL_SESG(K26, MACLINK1, MACLINK1, SIG_DESC_SET(SCU410, 4));
SIG_EXPR_LIST_DECL_SESG(K26, SCL13, I2C13, SIG_DESC_SET(SCU4B0, 4));
-PIN_DECL_2(K26, GPIOA4, MACLINK1, SCL13);
+/*SGPM2 is A1 Only */
+SIG_EXPR_LIST_DECL_SESG(K26, SGPM2CLK, SGPM2, SIG_DESC_SET(SCU6D0, 4),
+ SIG_DESC_CLEAR(SCU410, 4), SIG_DESC_CLEAR(SCU4B0, 4),
+ SIG_DESC_CLEAR(SCU690, 4));
+PIN_DECL_3(K26, GPIOA4, SGPM2CLK, MACLINK1, SCL13);
FUNC_GROUP_DECL(MACLINK1, K26);
#define L24 5
SIG_EXPR_LIST_DECL_SESG(L24, MACLINK2, MACLINK2, SIG_DESC_SET(SCU410, 5));
SIG_EXPR_LIST_DECL_SESG(L24, SDA13, I2C13, SIG_DESC_SET(SCU4B0, 5));
-PIN_DECL_2(L24, GPIOA5, MACLINK2, SDA13);
+/*SGPM2 is A1 Only */
+SIG_EXPR_LIST_DECL_SESG(L24, SGPM2LD, SGPM2, SIG_DESC_SET(SCU6D0, 5),
+ SIG_DESC_CLEAR(SCU410, 5), SIG_DESC_CLEAR(SCU4B0, 5),
+ SIG_DESC_CLEAR(SCU690, 5));
+PIN_DECL_3(L24, GPIOA5, SGPM2LD, MACLINK2, SDA13);
FUNC_GROUP_DECL(MACLINK2, L24);
FUNC_GROUP_DECL(I2C13, K26, L24);
@@ -95,16 +105,26 @@ FUNC_GROUP_DECL(I2C13, K26, L24);
#define L23 6
SIG_EXPR_LIST_DECL_SESG(L23, MACLINK3, MACLINK3, SIG_DESC_SET(SCU410, 6));
SIG_EXPR_LIST_DECL_SESG(L23, SCL14, I2C14, SIG_DESC_SET(SCU4B0, 6));
-PIN_DECL_2(L23, GPIOA6, MACLINK3, SCL14);
+/*SGPM2 is A1 Only */
+SIG_EXPR_LIST_DECL_SESG(L23, SGPM2O, SGPM2, SIG_DESC_SET(SCU6D0, 6),
+ SIG_DESC_CLEAR(SCU410, 6), SIG_DESC_CLEAR(SCU4B0, 6),
+ SIG_DESC_CLEAR(SCU690, 6));
+PIN_DECL_3(L23, GPIOA6, SGPM2O, MACLINK3, SCL14);
FUNC_GROUP_DECL(MACLINK3, L23);
#define K25 7
SIG_EXPR_LIST_DECL_SESG(K25, MACLINK4, MACLINK4, SIG_DESC_SET(SCU410, 7));
SIG_EXPR_LIST_DECL_SESG(K25, SDA14, I2C14, SIG_DESC_SET(SCU4B0, 7));
-PIN_DECL_2(K25, GPIOA7, MACLINK4, SDA14);
+/*SGPM2 is A1 Only */
+SIG_EXPR_LIST_DECL_SESG(K25, SGPM2I, SGPM2, SIG_DESC_SET(SCU6D0, 7),
+ SIG_DESC_CLEAR(SCU410, 7), SIG_DESC_CLEAR(SCU4B0, 7),
+ SIG_DESC_CLEAR(SCU690, 7));
+PIN_DECL_3(K25, GPIOA7, SGPM2I, MACLINK4, SDA14);
FUNC_GROUP_DECL(MACLINK4, K25);
FUNC_GROUP_DECL(I2C14, L23, K25);
+/*SGPM2 is A1 Only */
+FUNC_GROUP_DECL(SGPM2, K26, L24, L23, K25);
#define J26 8
SIG_EXPR_LIST_DECL_SESG(J26, SALT1, SALT1, SIG_DESC_SET(SCU410, 8));
@@ -2060,6 +2080,7 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
ASPEED_PINCTRL_GROUP(EMMCG4),
ASPEED_PINCTRL_GROUP(EMMCG8),
ASPEED_PINCTRL_GROUP(SGPM1),
+ ASPEED_PINCTRL_GROUP(SGPM2),
ASPEED_PINCTRL_GROUP(SGPS1),
ASPEED_PINCTRL_GROUP(SIOONCTRL),
ASPEED_PINCTRL_GROUP(SIOPBI),
@@ -2276,6 +2297,7 @@ static const struct aspeed_pin_function aspeed_g6_functions[] = {
ASPEED_PINCTRL_FUNC(SD1),
ASPEED_PINCTRL_FUNC(SD2),
ASPEED_PINCTRL_FUNC(SGPM1),
+ ASPEED_PINCTRL_FUNC(SGPM2),
ASPEED_PINCTRL_FUNC(SGPS1),
ASPEED_PINCTRL_FUNC(SIOONCTRL),
ASPEED_PINCTRL_FUNC(SIOPBI),
--
2.17.1
Powered by blists - more mailing lists