linux-kernel - Re: [PATCH] arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAGb2v65szCZyu+Gm0igGmyRGZRwvTr+0O-QYAMyTk8n_V7Ne-Q@mail.gmail.com>
Date:   Mon, 19 Oct 2020 12:08:42 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Clément Péron <peron.clem@...il.com>
Cc:     Maxime Ripard <mripard@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        devicetree <devicetree@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: allwinner: beelink-gs1: Enable both RGMII
 RX/TX delay

On Mon, Oct 19, 2020 at 1:57 AM Clément Péron <peron.clem@...il.com> wrote:
>
> Hi,
>
> On Sun, 18 Oct 2020 at 19:24, Clément Péron <peron.clem@...il.com> wrote:
> >
> > Before the commit:
> > net: phy: realtek: fix rtl8211e rx/tx delay config
> bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
>
> With the hash for reference it's better :)
> Clement
>
> >
> > The software overwrite for RX/TX delays of the RTL8211e were not
> > working properly and the Beelink GS1 had both RX/TX delay of RGMII
> > interface set using pull-up on the TXDLY and RXDLY pins.
> >
> > Now that these delays are working properly they overwrite the HW
> > config and set this to 'rgmii' meaning no delay on both RX/TX.
> > This makes the ethernet of this board not working anymore.
> >
> > Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
> > in the device-tree to keep the correct configuration.
> >
> > Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> > Signed-off-by: Clément Péron <peron.clem@...il.com>

Acked-by: Chen-Yu Tsai <wens@...e.org>

For reference, the driver fix for dwmac enabling the other RGMII modes

    f1239d8aa84d ("net: stmmac: dwmac-sun8i: Allow all RGMII modes")

was merged in v5.5 and was backported to relevant stable kernels.

> > ---
> >  arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > index a364cb4e5b3f..6ab53860e447 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > @@ -99,7 +99,7 @@ &ehci0 {
> >  &emac {
> >         pinctrl-names = "default";
> >         pinctrl-0 = <&ext_rgmii_pins>;
> > -       phy-mode = "rgmii";
> > +       phy-mode = "rgmii-id";
> >         phy-handle = <&ext_rgmii_phy>;
> >         phy-supply = <&reg_aldo2>;
> >         status = "okay";
> > --
> > 2.25.1
> >