linux-kernel - Re: [PATCH] arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20201022155909.tuewdjw2b2nowp3f@gilmour.lan>
Date:   Thu, 22 Oct 2020 17:59:09 +0200
From:   Maxime Ripard <maxime@...no.tech>
To:     Clément Péron <peron.clem@...il.com>
Cc:     Rob Herring <robh+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: allwinner: beelink-gs1: Enable both RGMII
 RX/TX delay

On Sun, Oct 18, 2020 at 07:24:09PM +0200, Clément Péron wrote:
> Before the commit:
> net: phy: realtek: fix rtl8211e rx/tx delay config
> 
> The software overwrite for RX/TX delays of the RTL8211e were not
> working properly and the Beelink GS1 had both RX/TX delay of RGMII
> interface set using pull-up on the TXDLY and RXDLY pins.
> 
> Now that these delays are working properly they overwrite the HW
> config and set this to 'rgmii' meaning no delay on both RX/TX.
> This makes the ethernet of this board not working anymore.
> 
> Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays
> in the device-tree to keep the correct configuration.
> 
> Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> Signed-off-by: Clément Péron <peron.clem@...il.com>

Fixed the commit ID and queued as a fix for 5.10

Maxime

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)