[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <64254fdf-dcb3-b27f-9624-de2abacf55d2@linaro.org>
Date: Tue, 20 Oct 2020 22:47:10 -0400
From: Thara Gopinath <thara.gopinath@...aro.org>
To: Cristian Marussi <cristian.marussi@....com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: sudeep.holla@....com, lukasz.luba@....com,
james.quinlan@...adcom.com, Jonathan.Cameron@...wei.com,
f.fainelli@...il.com, etienne.carriere@...aro.org,
vincent.guittot@...aro.org, souvik.chakravarty@....com
Subject: Re: [PATCH 03/11] firmware: arm_scmi: introduce common protocol
interface
On 10/14/20 11:05 AM, Cristian Marussi wrote:
> Introduce generic get_ops/put_ops handle operations: any protocol, both
> standard or custom, now exposes its operations through this common
> interface which internally takes care to account for protocols' usage:
> protocols' initialization is now performed on demand as soon as the first
> user shows up while deinitialization (if any) is performed once
> the last user of a protocol has gone.
> Registered events' notifier are tracked too against the related protocol.
> Convert all SCMI drivers to the new interface too.
>
> Signed-off-by: Cristian Marussi <cristian.marussi@....com>
> ---
[...]
> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> index bad1d0130e96..049220efd227 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -585,7 +585,7 @@ void *scmi_get_proto_priv(const struct scmi_handle *handle, u8 protocol_id)
> * Return: A reference to an initialized protocol instance or error on failure.
> */
> static struct scmi_protocol_instance * __must_check
> -scmi_get_protocol_instance(struct scmi_handle *handle, u8 protocol_id)
> +scmi_get_protocol_instance(const struct scmi_handle *handle, u8 protocol_id)
> {
> int ret = -ENOMEM;
> void *gid;
> @@ -655,7 +655,7 @@ scmi_get_protocol_instance(struct scmi_handle *handle, u8 protocol_id)
> *
> * Return: 0 if protocol was acquired successfully.
> */
> -int scmi_acquire_protocol(struct scmi_handle *handle, u8 protocol_id)
> +int scmi_acquire_protocol(const struct scmi_handle *handle, u8 protocol_id)
> {
> return IS_ERR(scmi_get_protocol_instance(handle, protocol_id));
> }
> @@ -668,7 +668,7 @@ int scmi_acquire_protocol(struct scmi_handle *handle, u8 protocol_id)
> * Remove one user for the specified protocol and triggers de-initialization
> * and resources de-allocation once the last user has gone.
> */
> -void scmi_release_protocol(struct scmi_handle *handle, u8 protocol_id)
> +void scmi_release_protocol(const struct scmi_handle *handle, u8 protocol_id)
> {
> struct scmi_info *info = handle_to_scmi_info(handle);
> struct scmi_protocol_instance *pi;
> @@ -700,6 +700,29 @@ void scmi_release_protocol(struct scmi_handle *handle, u8 protocol_id)
> mutex_unlock(&info->protocols_mtx);
> }
>
> +/**
> + * scmi_get_protocol_operations - Get protocol operations
> + * @handle: A reference to the SCMI platform instance.
> + * @protocol_id: The protocol being requested.
> + *
> + * Get hold of a protocol accounting for its usage, eventually triggering its
> + * initialization, and returning the protocol specific operations.
> + *
> + * Return: A reference to the requested protocol operations or error.
> + * Must be checked for errors by caller.
> + */
> +static const void __must_check
> +*scmi_get_protocol_operations(const struct scmi_handle *handle, u8 protocol_id)
> +{
> + struct scmi_protocol_instance *pi;
> +
> + pi = scmi_get_protocol_instance(handle, protocol_id);
> + if (IS_ERR(pi))
> + return pi;
> +
> + return pi->proto->ops;
> +} > +
> void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
> u8 *prot_imp)
> {
> @@ -975,6 +998,8 @@ static int scmi_probe(struct platform_device *pdev)
> handle = &info->handle;
> handle->dev = info->dev;
> handle->version = &info->version;
> + handle->get_ops = scmi_get_protocol_operations;
> + handle->put_ops = scmi_release_protocol;
Why do you need get_ops and put_ops? Why not have the drivers call
scmi_acquire_protocol and scmi_release_protocol directly and get the ops
from retrieved scmi_get_protocol_instance ? IMHO, this makes it more
readable. Also, this will make the usage of scmi_acquire_protocol and
scmi_release_protocol more consistent. Right now, notify.c uses
scmi_acquire_protocol to acquire protocol because there is no need for
ops and other drivers use get_ops to acquire protocol. Kind of confusing..
--
Warm Regards
Thara
>
> ret = scmi_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
> if (ret)
> diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
> index eae58b2a92cc..02b00af9b08f 100644
> --- a/drivers/firmware/arm_scmi/notify.c
> +++ b/drivers/firmware/arm_scmi/notify.c
> @@ -367,7 +367,7 @@ static struct scmi_event_handler *
> scmi_get_active_handler(struct scmi_notify_instance *ni, u32 evt_key);
> static void scmi_put_active_handler(struct scmi_notify_instance *ni,
> struct scmi_event_handler *hndl);
> -static void scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
> +static bool scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
> struct scmi_event_handler *hndl);
>
> /**
> @@ -899,9 +899,21 @@ static inline int scmi_bind_event_handler(struct scmi_notify_instance *ni,
> if (!r_evt)
> return -EINVAL;
>
> - /* Remove from pending and insert into registered */
> + /*
> + * Remove from pending and insert into registered while getting hold
> + * of protocol instance.
> + */
> hash_del(&hndl->hash);
> + /*
> + * Acquire protocols only for NON pending handlers, so as NOT to trigger
> + * protocol initialization when a notifier is registered against a still
> + * not registered protocol, since it would make little sense to force init
> + * protocols for which still no SCMI driver user exists: they wouldn't
> + * emit any event anyway till some SCMI driver starts using it.
> + */
> + scmi_acquire_protocol(ni->handle, KEY_XTRACT_PROTO_ID(hndl->key));
> hndl->r_evt = r_evt;
> +
> mutex_lock(&r_evt->proto->registered_mtx);
> hash_add(r_evt->proto->registered_events_handlers,
> &hndl->hash, hndl->key);
> @@ -1192,41 +1204,65 @@ static int scmi_disable_events(struct scmi_event_handler *hndl)
> * * unregister and free the handler itself
> *
> * Context: Assumes all the proper locking has been managed by the caller.
> + *
> + * Return: True if handler was freed (users dropped to zero)
> */
> -static void scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
> +static bool scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
> struct scmi_event_handler *hndl)
> {
> + bool freed = false;
> +
> if (refcount_dec_and_test(&hndl->users)) {
> if (!IS_HNDL_PENDING(hndl))
> scmi_disable_events(hndl);
> scmi_free_event_handler(hndl);
> + freed = true;
> }
> +
> + return freed;
> }
>
> static void scmi_put_handler(struct scmi_notify_instance *ni,
> struct scmi_event_handler *hndl)
> {
> + bool freed;
> + u8 protocol_id;
> struct scmi_registered_event *r_evt = hndl->r_evt;
>
> mutex_lock(&ni->pending_mtx);
> - if (r_evt)
> + if (r_evt) {
> + protocol_id = r_evt->proto->id;
> mutex_lock(&r_evt->proto->registered_mtx);
> + }
>
> - scmi_put_handler_unlocked(ni, hndl);
> + freed = scmi_put_handler_unlocked(ni, hndl);
>
> - if (r_evt)
> + if (r_evt) {
> mutex_unlock(&r_evt->proto->registered_mtx);
> + /*
> + * Only registered handler acquired protocol; must be here
> + * released only AFTER unlocking registered_mtx, since
> + * releasing a protocol can trigger its de-initialization
> + * (ie. including r_evt and registered_mtx)
> + */
> + if (freed)
> + scmi_release_protocol(ni->handle, protocol_id);
> + }
> mutex_unlock(&ni->pending_mtx);
> }
>
> static void scmi_put_active_handler(struct scmi_notify_instance *ni,
> struct scmi_event_handler *hndl)
> {
> + bool freed;
> struct scmi_registered_event *r_evt = hndl->r_evt;
> + u8 protocol_id = r_evt->proto->id;
>
> mutex_lock(&r_evt->proto->registered_mtx);
> - scmi_put_handler_unlocked(ni, hndl);
> + freed = scmi_put_handler_unlocked(ni, hndl);
> mutex_unlock(&r_evt->proto->registered_mtx);
> + if (freed)
> + scmi_release_protocol(ni->handle, protocol_id);
> }
>
> /**
> diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
> index 13e215f359fb..bd9cb2583557 100644
> --- a/drivers/firmware/arm_scmi/perf.c
> +++ b/drivers/firmware/arm_scmi/perf.c
> @@ -857,7 +857,7 @@ static const struct scmi_event_ops perf_event_ops = {
> .fill_custom_report = scmi_perf_fill_custom_report,
> };
>
> -static int scmi_perf_protocol_init(struct scmi_handle *handle)
> +static int scmi_perf_protocol_init(const struct scmi_handle *handle)
> {
> int domain;
> u32 version;
> @@ -896,7 +896,6 @@ static int scmi_perf_protocol_init(struct scmi_handle *handle)
> pinfo->num_domains);
>
> pinfo->version = version;
> - handle->perf_ops = &perf_ops;
> return scmi_set_proto_priv(handle, SCMI_PROTOCOL_PERF, pinfo);
> }
>
> diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
> index e0b29ed4e09a..1e026b5530a7 100644
> --- a/drivers/firmware/arm_scmi/power.c
> +++ b/drivers/firmware/arm_scmi/power.c
> @@ -262,7 +262,7 @@ static const struct scmi_event_ops power_event_ops = {
> .fill_custom_report = scmi_power_fill_custom_report,
> };
>
> -static int scmi_power_protocol_init(struct scmi_handle *handle)
> +static int scmi_power_protocol_init(const struct scmi_handle *handle)
> {
> int domain;
> u32 version;
> @@ -297,7 +297,6 @@ static int scmi_power_protocol_init(struct scmi_handle *handle)
> pinfo->num_domains);
>
> pinfo->version = version;
> - handle->power_ops = &power_ops;
> return scmi_set_proto_priv(handle, SCMI_PROTOCOL_POWER, pinfo);
> }
>
> diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c
> index f70e9b5108d5..b7da4de0e56e 100644
> --- a/drivers/firmware/arm_scmi/reset.c
> +++ b/drivers/firmware/arm_scmi/reset.c
> @@ -274,7 +274,7 @@ static const struct scmi_event_ops reset_event_ops = {
> .fill_custom_report = scmi_reset_fill_custom_report,
> };
>
> -static int scmi_reset_protocol_init(struct scmi_handle *handle)
> +static int scmi_reset_protocol_init(const struct scmi_handle *handle)
> {
> int domain;
> u32 version;
> @@ -309,7 +309,6 @@ static int scmi_reset_protocol_init(struct scmi_handle *handle)
> pinfo->num_domains);
>
> pinfo->version = version;
> - handle->reset_ops = &reset_ops;
> return scmi_set_proto_priv(handle, SCMI_PROTOCOL_RESET, pinfo);
> }
>
> diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
> index 9e44479f0284..bfea56f77890 100644
> --- a/drivers/firmware/arm_scmi/scmi_pm_domain.c
> +++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
> @@ -2,7 +2,7 @@
> /*
> * SCMI Generic power domain support.
> *
> - * Copyright (C) 2018 ARM Ltd.
> + * Copyright (C) 2018-2020 ARM Ltd.
> */
>
> #include <linux/err.h>
> @@ -11,6 +11,8 @@
> #include <linux/pm_domain.h>
> #include <linux/scmi_protocol.h>
>
> +static const struct scmi_power_ops *power_ops;
> +
> struct scmi_pm_domain {
> struct generic_pm_domain genpd;
> const struct scmi_handle *handle;
> @@ -25,16 +27,15 @@ static int scmi_pd_power(struct generic_pm_domain *domain, bool power_on)
> int ret;
> u32 state, ret_state;
> struct scmi_pm_domain *pd = to_scmi_pd(domain);
> - const struct scmi_power_ops *ops = pd->handle->power_ops;
>
> if (power_on)
> state = SCMI_POWER_STATE_GENERIC_ON;
> else
> state = SCMI_POWER_STATE_GENERIC_OFF;
>
> - ret = ops->state_set(pd->handle, pd->domain, state);
> + ret = power_ops->state_set(pd->handle, pd->domain, state);
> if (!ret)
> - ret = ops->state_get(pd->handle, pd->domain, &ret_state);
> + ret = power_ops->state_get(pd->handle, pd->domain, &ret_state);
> if (!ret && state != ret_state)
> return -EIO;
>
> @@ -61,10 +62,14 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
> struct generic_pm_domain **domains;
> const struct scmi_handle *handle = sdev->handle;
>
> - if (!handle || !handle->power_ops)
> + if (!handle)
> return -ENODEV;
>
> - num_domains = handle->power_ops->num_domains_get(handle);
> + power_ops = handle->get_ops(handle, SCMI_PROTOCOL_POWER);
> + if (IS_ERR(power_ops))
> + return PTR_ERR(power_ops);
> +
> + num_domains = power_ops->num_domains_get(handle);
> if (num_domains < 0) {
> dev_err(dev, "number of domains not found\n");
> return num_domains;
> @@ -85,14 +90,14 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
> for (i = 0; i < num_domains; i++, scmi_pd++) {
> u32 state;
>
> - if (handle->power_ops->state_get(handle, i, &state)) {
> + if (power_ops->state_get(handle, i, &state)) {
> dev_warn(dev, "failed to get state for domain %d\n", i);
> continue;
> }
>
> scmi_pd->domain = i;
> scmi_pd->handle = handle;
> - scmi_pd->name = handle->power_ops->name_get(handle, i);
> + scmi_pd->name = power_ops->name_get(handle, i);
> scmi_pd->genpd.name = scmi_pd->name;
> scmi_pd->genpd.power_off = scmi_pd_power_off;
> scmi_pd->genpd.power_on = scmi_pd_power_on;
> @@ -111,6 +116,13 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
> return 0;
> }
>
> +static void scmi_pm_domain_remove(struct scmi_device *sdev)
> +{
> + const struct scmi_handle *handle = sdev->handle;
> +
> + handle->put_ops(handle, SCMI_PROTOCOL_POWER);
> +}
> +
> static const struct scmi_device_id scmi_id_table[] = {
> { SCMI_PROTOCOL_POWER, "genpd" },
> { },
> @@ -120,6 +132,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
> static struct scmi_driver scmi_power_domain_driver = {
> .name = "scmi-power-domain",
> .probe = scmi_pm_domain_probe,
> + .remove = scmi_pm_domain_remove,
> .id_table = scmi_id_table,
> };
> module_scmi_driver(scmi_power_domain_driver);
> diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
> index 8a0a599558ba..e0129dcd322f 100644
> --- a/drivers/firmware/arm_scmi/sensors.c
> +++ b/drivers/firmware/arm_scmi/sensors.c
> @@ -334,7 +334,7 @@ static const struct scmi_event_ops sensor_event_ops = {
> .fill_custom_report = scmi_sensor_fill_custom_report,
> };
>
> -static int scmi_sensors_protocol_init(struct scmi_handle *handle)
> +static int scmi_sensors_protocol_init(const struct scmi_handle *handle)
> {
> u32 version;
> struct sensors_info *sinfo;
> @@ -364,7 +364,6 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle)
> sinfo->num_sensors);
>
> sinfo->version = version;
> - handle->sensor_ops = &sensor_ops;
> return scmi_set_proto_priv(handle, SCMI_PROTOCOL_SENSOR, sinfo);
> }
>
> diff --git a/drivers/firmware/arm_scmi/system.c b/drivers/firmware/arm_scmi/system.c
> index 8f53f93c63ca..30e3510c1f07 100644
> --- a/drivers/firmware/arm_scmi/system.c
> +++ b/drivers/firmware/arm_scmi/system.c
> @@ -101,7 +101,7 @@ static const struct scmi_event_ops system_event_ops = {
> .fill_custom_report = scmi_system_fill_custom_report,
> };
>
> -static int scmi_system_protocol_init(struct scmi_handle *handle)
> +static int scmi_system_protocol_init(const struct scmi_handle *handle)
> {
> u32 version;
> struct scmi_system_info *pinfo;
> diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
> index d421e691318b..27ef71996a15 100644
> --- a/drivers/hwmon/scmi-hwmon.c
> +++ b/drivers/hwmon/scmi-hwmon.c
> @@ -2,7 +2,7 @@
> /*
> * System Control and Management Interface(SCMI) based hwmon sensor driver
> *
> - * Copyright (C) 2018 ARM Ltd.
> + * Copyright (C) 2018-2020 ARM Ltd.
> * Sudeep Holla <sudeep.holla@....com>
> */
>
> @@ -13,6 +13,8 @@
> #include <linux/sysfs.h>
> #include <linux/thermal.h>
>
> +static const struct scmi_sensor_ops *sensor_ops;
> +
> struct scmi_sensors {
> const struct scmi_handle *handle;
> const struct scmi_sensor_info **info[hwmon_max];
> @@ -72,7 +74,7 @@ static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> const struct scmi_handle *h = scmi_sensors->handle;
>
> sensor = *(scmi_sensors->info[type] + channel);
> - ret = h->sensor_ops->reading_get(h, sensor->id, &value);
> + ret = sensor_ops->reading_get(h, sensor->id, &value);
> if (ret)
> return ret;
>
> @@ -170,10 +172,14 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
> const struct hwmon_channel_info **ptr_scmi_ci;
> const struct scmi_handle *handle = sdev->handle;
>
> - if (!handle || !handle->sensor_ops)
> + if (!handle)
> return -ENODEV;
>
> - nr_sensors = handle->sensor_ops->count_get(handle);
> + sensor_ops = handle->get_ops(handle, SCMI_PROTOCOL_SENSOR);
> + if (IS_ERR(sensor_ops))
> + return PTR_ERR(sensor_ops);
> +
> + nr_sensors = sensor_ops->count_get(handle);
> if (!nr_sensors)
> return -EIO;
>
> @@ -184,7 +190,7 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
> scmi_sensors->handle = handle;
>
> for (i = 0; i < nr_sensors; i++) {
> - sensor = handle->sensor_ops->info_get(handle, i);
> + sensor = sensor_ops->info_get(handle, i);
> if (!sensor)
> return -EINVAL;
>
> @@ -234,7 +240,7 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
> }
>
> for (i = nr_sensors - 1; i >= 0 ; i--) {
> - sensor = handle->sensor_ops->info_get(handle, i);
> + sensor = sensor_ops->info_get(handle, i);
> if (!sensor)
> continue;
>
> @@ -258,6 +264,13 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
> return PTR_ERR_OR_ZERO(hwdev);
> }
>
> +static void scmi_hwmon_remove(struct scmi_device *sdev)
> +{
> + const struct scmi_handle *handle = sdev->handle;
> +
> + handle->put_ops(handle, SCMI_PROTOCOL_SENSOR);
> +}
> +
> static const struct scmi_device_id scmi_id_table[] = {
> { SCMI_PROTOCOL_SENSOR, "hwmon" },
> { },
> @@ -267,6 +280,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
> static struct scmi_driver scmi_hwmon_drv = {
> .name = "scmi-hwmon",
> .probe = scmi_hwmon_probe,
> + .remove = scmi_hwmon_remove,
> .id_table = scmi_id_table,
> };
> module_scmi_driver(scmi_hwmon_drv);
> diff --git a/drivers/reset/reset-scmi.c b/drivers/reset/reset-scmi.c
> index 8d3a858e3b19..e48220dedb35 100644
> --- a/drivers/reset/reset-scmi.c
> +++ b/drivers/reset/reset-scmi.c
> @@ -2,7 +2,7 @@
> /*
> * ARM System Control and Management Interface (ARM SCMI) reset driver
> *
> - * Copyright (C) 2019 ARM Ltd.
> + * Copyright (C) 2019-2020 ARM Ltd.
> */
>
> #include <linux/module.h>
> @@ -11,6 +11,8 @@
> #include <linux/reset-controller.h>
> #include <linux/scmi_protocol.h>
>
> +static const struct scmi_reset_ops *reset_ops;
> +
> /**
> * struct scmi_reset_data - reset controller information structure
> * @rcdev: reset controller entity
> @@ -39,7 +41,7 @@ scmi_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
> {
> const struct scmi_handle *handle = to_scmi_handle(rcdev);
>
> - return handle->reset_ops->assert(handle, id);
> + return reset_ops->assert(handle, id);
> }
>
> /**
> @@ -57,7 +59,7 @@ scmi_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
> {
> const struct scmi_handle *handle = to_scmi_handle(rcdev);
>
> - return handle->reset_ops->deassert(handle, id);
> + return reset_ops->deassert(handle, id);
> }
>
> /**
> @@ -75,7 +77,7 @@ scmi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id)
> {
> const struct scmi_handle *handle = to_scmi_handle(rcdev);
>
> - return handle->reset_ops->reset(handle, id);
> + return reset_ops->reset(handle, id);
> }
>
> static const struct reset_control_ops scmi_reset_ops = {
> @@ -91,9 +93,13 @@ static int scmi_reset_probe(struct scmi_device *sdev)
> struct device_node *np = dev->of_node;
> const struct scmi_handle *handle = sdev->handle;
>
> - if (!handle || !handle->reset_ops)
> + if (!handle)
> return -ENODEV;
>
> + reset_ops = handle->get_ops(handle, SCMI_PROTOCOL_RESET);
> + if (IS_ERR(reset_ops))
> + return PTR_ERR(reset_ops);
> +
> data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> if (!data)
> return -ENOMEM;
> @@ -101,12 +107,19 @@ static int scmi_reset_probe(struct scmi_device *sdev)
> data->rcdev.ops = &scmi_reset_ops;
> data->rcdev.owner = THIS_MODULE;
> data->rcdev.of_node = np;
> - data->rcdev.nr_resets = handle->reset_ops->num_domains_get(handle);
> + data->rcdev.nr_resets = reset_ops->num_domains_get(handle);
> data->handle = handle;
>
> return devm_reset_controller_register(dev, &data->rcdev);
> }
>
> +static void scmi_reset_remove(struct scmi_device *sdev)
> +{
> + const struct scmi_handle *handle = sdev->handle;
> +
> + handle->put_ops(handle, SCMI_PROTOCOL_RESET);
> +}
> +
> static const struct scmi_device_id scmi_id_table[] = {
> { SCMI_PROTOCOL_RESET, "reset" },
> { },
> @@ -116,6 +129,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
> static struct scmi_driver scmi_reset_driver = {
> .name = "scmi-reset",
> .probe = scmi_reset_probe,
> + .remove = scmi_reset_remove,
> .id_table = scmi_id_table,
> };
> module_scmi_driver(scmi_reset_driver);
> diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
> index bc4f06d46bfb..bfe7017cff19 100644
> --- a/include/linux/scmi_protocol.h
> +++ b/include/linux/scmi_protocol.h
> @@ -257,11 +257,6 @@ struct scmi_notify_ops {
> *
> * @dev: pointer to the SCMI device
> * @version: pointer to the structure containing SCMI version information
> - * @power_ops: pointer to set of power protocol operations
> - * @perf_ops: pointer to set of performance protocol operations
> - * @clk_ops: pointer to set of clock protocol operations
> - * @sensor_ops: pointer to set of sensor protocol operations
> - * @reset_ops: pointer to set of reset protocol operations
> * @notify_ops: pointer to set of notifications related operations
> * @notify_priv: pointer to private data structure specific to notifications
> * (for internal use only)
> @@ -269,11 +264,11 @@ struct scmi_notify_ops {
> struct scmi_handle {
> struct device *dev;
> struct scmi_revision_info *version;
> - const struct scmi_perf_ops *perf_ops;
> - const struct scmi_clk_ops *clk_ops;
> - const struct scmi_power_ops *power_ops;
> - const struct scmi_sensor_ops *sensor_ops;
> - const struct scmi_reset_ops *reset_ops;
> +
> + const void __must_check *(*get_ops)(const struct scmi_handle *handle,
> + u8 proto);
> + void (*put_ops)(const struct scmi_handle *handle, u8 proto);
> +
> const struct scmi_notify_ops *notify_ops;
> void *notify_priv;
> };
>
Powered by blists - more mailing lists