linux-kernel - [PATCH v2] usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201023131503.759671-1-Sandeep.Singh@amd.com>
Date:   Fri, 23 Oct 2020 18:45:03 +0530
From:   Sandeep Singh <Sandeep.Singh@....com>
To:     mathias.nyman@...el.com, gregkh@...uxfoundation.org,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        sanket.goswami@....com, Nehal-bakulchandra.Shah@....com
Cc:     Shyam-sundar.S-k@....com, Sandeep Singh <sandeep.singh@....com>,
        Sanket Goswami <Sanket.Goswami@....com>
Subject: [PATCH v2] usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC

From: Sandeep Singh <sandeep.singh@....com>

On some platform of AMD, S3 fails with HCE and SRE errors. To fix this,
need to disable a bit which is enable in sparse controller.

Signed-off-by: Sanket Goswami <Sanket.Goswami@....com>
Signed-off-by: Sandeep Singh <sandeep.singh@....com>
---
Changes since v1:(https://lkml.org/lkml/2020/10/23/368)
	-> Add xhci.h changes

 drivers/usb/host/xhci-pci.c | 17 +++++++++++++++++
 drivers/usb/host/xhci.h     |  1 +
 2 files changed, 18 insertions(+)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c26c06e5c88c..bf89172c43ca 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -23,6 +23,8 @@
 #define SSIC_PORT_CFG2_OFFSET	0x30
 #define PROG_DONE		(1 << 30)
 #define SSIC_PORT_UNUSED	(1 << 31)
+#define SPARSE_DISABLE_BIT	17
+#define SPARSE_CNTL_ENABLE	0xC12C
 
 /* Device for a quirk */
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
@@ -161,6 +163,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	    (pdev->device == 0x15e0 || pdev->device == 0x15e1))
 		xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5)
+		xhci->quirks |= XHCI_DISABLE_SPARSE;
+
 	if (pdev->vendor == PCI_VENDOR_ID_AMD)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 
@@ -498,6 +503,15 @@ static void xhci_pme_quirk(struct usb_hcd *hcd)
 	readl(reg);
 }
 
+static void xhci_sparse_control_quirk(struct usb_hcd *hcd)
+{
+	u32 reg;
+
+	reg = readl(hcd->regs + SPARSE_CNTL_ENABLE);
+	reg &= ~BIT(SPARSE_DISABLE_BIT);
+	writel(reg, hcd->regs + SPARSE_CNTL_ENABLE);
+}
+
 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
@@ -517,6 +531,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
 		xhci_ssic_port_unused_quirk(hcd, true);
 
+	if (xhci->quirks & XHCI_DISABLE_SPARSE)
+		xhci_sparse_control_quirk(hcd);
+
 	ret = xhci_suspend(xhci, do_wakeup);
 	if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
 		xhci_ssic_port_unused_quirk(hcd, false);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8be88379c0fb..ebb359ebb261 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1877,6 +1877,7 @@ struct xhci_hcd {
 #define XHCI_SNPS_BROKEN_SUSPEND    BIT_ULL(35)
 #define XHCI_RENESAS_FW_QUIRK	BIT_ULL(36)
 #define XHCI_SKIP_PHY_INIT	BIT_ULL(37)
+#define XHCI_DISABLE_SPARSE	BIT_ULL(38)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
-- 
2.25.1