linux-kernel - [PATCH 03/12] ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid family

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201026181528.163143-4-krzk@kernel.org>
Date:   Mon, 26 Oct 2020 19:15:19 +0100
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Rob Herring <robh+dt@...nel.org>, Kukjin Kim <kgene@...nel.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Marek Szyprowski <m.szyprowski@...sung.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Sylwester Nawrocki <snawrocki@...nel.org>,
        Alim Akhtar <alim.akhtar@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCH 03/12] ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid family

Using full paths to extend or override a device tree node is error
prone.  If there was a typo error, a new node will be created instead of
extending the existing node.  This will lead to run-time errors that
could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).

Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
 .../boot/dts/exynos4412-odroid-common.dtsi    |  2 +-
 arch/arm/boot/dts/exynos4412-odroidx.dts      | 24 +++++++++----------
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2983e91bc7dd..c3b6e6d367ab 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -22,7 +22,7 @@ firmware@...f000 {
 		reg = <0x0204F000 0x1000>;
 	};
 
-	gpio_keys {
+	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_power_key>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 3ea2a0101e80..68fe88074d1d 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -36,18 +36,6 @@ led2 {
 		};
 	};
 
-	gpio_keys {
-		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
-
-		home_key {
-			gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_HOME>;
-			label = "home key";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
 	regulator_p3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "p3v3_en";
@@ -76,6 +64,18 @@ &ehci {
 	phy-names = "hsic0";
 };
 
+&gpio_keys {
+	pinctrl-0 = <&gpio_power_key &gpio_home_key>;
+
+	home-key {
+		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+		linux,code = <KEY_HOME>;
+		label = "home key";
+		debounce-interval = <10>;
+		wakeup-source;
+	};
+};
+
 &mshc_0 {
 	vqmmc-supply = <&buck8_reg>;
 };
-- 
2.25.1