linux-kernel - [PATCH 06/12] ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201026181528.163143-7-krzk@kernel.org>
Date:   Mon, 26 Oct 2020 19:15:22 +0100
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Rob Herring <robh+dt@...nel.org>, Kukjin Kim <kgene@...nel.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Marek Szyprowski <m.szyprowski@...sung.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Sylwester Nawrocki <snawrocki@...nel.org>,
        Alim Akhtar <alim.akhtar@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCH 06/12] ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards

The Devicetree specification expects device node names to have a generic
name, representing the class of a device.  Also the convention for node
names is to use hyphens, not underscores.

No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts      | 4 ++--
 arch/arm/boot/dts/exynos5250-smdk5250.dts     | 4 ++--
 arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 ++--
 arch/arm/boot/dts/exynos5250-spring.dts       | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 79546f11af26..6394d4e6655b 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -27,7 +27,7 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		menu {
@@ -211,7 +211,7 @@ &i2c_0 {
 	samsung,i2c-max-bus-freq = <20000>;
 	samsung,i2c-slave-addr = <0x66>;
 
-	s5m8767_pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 186790f39e4d..622e609c0317 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -290,7 +290,7 @@ eeprom@51 {
 		reg = <0x51>;
 	};
 
-	wm8994: wm8994@1a {
+	wm8994: codec@1a {
 		compatible = "wlf,wm8994";
 		reg = <0x1a>;
 
@@ -385,7 +385,7 @@ &spi_1 {
 	status = "okay";
 	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
 
-	w25q80bw@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "w25x80";
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a615148e..6635f6184051 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -217,7 +217,7 @@ panel_in: endpoint {
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: mmc3-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
 			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
@@ -289,7 +289,7 @@ &i2c_0 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <378000>;
 
-	max77686: max77686@9 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index a92ade33779c..9d2baea62d0d 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -105,7 +105,7 @@ &i2c_0 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <378000>;
 
-	s5m8767-pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
-- 
2.25.1