| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4db73122-eec6-d177-6ceb-abc419f92d59@linux.ibm.com>
Date: Thu, 29 Oct 2020 20:59:56 +0530
From: kajoljain <kjain@...ux.ibm.com>
To: Jonathan Cameron <jic23@...nel.org>,
Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Cc: Linux Doc Mailing List <linux-doc@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"David S. Miller" <davem@...emloft.net>,
"Gautham R. Shenoy" <ego@...ux.vnet.ibm.com>,
Jonathan Corbet <corbet@....net>,
Marek Behún <marek.behun@....cz>,
Marek Marczykowski-Górecki
<marmarek@...isiblethingslab.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Pali Rohár <pali@...nel.org>,
"Peter Zijlstra (Intel)" <peterz@...radead.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Roger Pau Monné <roger.pau@...rix.com>,
Alexander Antonov <alexander.antonov@...ux.intel.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Andreas Klinger <ak@...klinger.de>,
Andrew Donnellan <ajd@...ux.ibm.com>,
Andrew Lunn <andrew@...n.ch>,
Andrew Morton <akpm@...ux-foundation.org>,
Andy Shevchenko <andriy.shevchenko@...el.com>,
Anton Vorontsov <anton@...msg.org>,
Asutosh Das <asutoshd@...eaurora.org>,
Avri Altman <avri.altman@....com>,
Bart Van Assche <bvanassche@....org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Boris Brezillon <bbrezillon@...nel.org>,
Boris Ostrovsky <boris.ostrovsky@...cle.com>,
Cezary Rojewski <cezary.rojewski@...el.com>,
Chao Yu <chao@...nel.org>,
Christian Gromm <christian.gromm@...rochip.com>,
Colin Cross <ccross@...roid.com>, Dan Murphy <dmurphy@...com>,
Dan Williams <dan.j.williams@...el.com>,
Daniel Thompson <daniel.thompson@...aro.org>,
Danil Kipnis <danil.kipnis@...ud.ionos.com>,
David Sterba <dsterba@...e.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Dongsheng Yang <dongsheng.yang@...ystack.cn>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Florian Fainelli <f.fainelli@...il.com>,
Frederic Barrat <fbarrat@...ux.ibm.com>,
Gregory CLEMENT <gregory.clement@...tlin.com>,
Guenter Roeck <linux@...ck-us.net>,
Hanjun Guo <guohanjun@...wei.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Heiner Kallweit <hkallweit1@...il.com>,
Ilya Dryomov <idryomov@...il.com>,
Jack Wang <jinpu.wang@...ud.ionos.com>,
Jaegeuk Kim <jaegeuk@...nel.org>,
Jarkko Sakkinen <jarkko@...nel.org>,
Jens Axboe <axboe@...nel.dk>,
Jerry Snitselaar <jsnitsel@...hat.com>,
Jingoo Han <jingoohan1@...il.com>,
Johan Hovold <johan@...nel.org>,
Jonas Meurer <jonas@...esources.org>,
Josh Poimboeuf <jpoimboe@...hat.com>,
Kan Liang <kan.liang@...ux.intel.com>,
Kees Cook <keescook@...omium.org>,
Konstantin Khlebnikov <koct9i@...il.com>,
Kranthi Kuntala <kranthi.kuntala@...el.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Lee Jones <lee.jones@...aro.org>, Len Brown <lenb@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Madhavan Srinivasan <maddy@...ux.ibm.com>,
Mario Limonciello <mario.limonciello@...l.com>,
Mark Brown <broonie@...nel.org>,
Mark Gross <mgross@...ux.intel.com>,
Mathieu Malaterre <malat@...ian.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Michael Ellerman <mpe@...erman.id.au>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Mike Leach <mike.leach@...aro.org>,
Mimi Zohar <zohar@...ux.ibm.com>,
Oded Gabbay <oded.gabbay@...il.com>,
Ohad Ben-Cohen <ohad@...ery.com>,
Oleh Kravchenko <oleg@....org.ua>,
Paul Cercueil <paul@...pouillou.net>,
Pavel Machek <pavel@....cz>,
Pawan Gupta <pawan.kumar.gupta@...ux.intel.com>,
Peter Chen <peter.chen@....com>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
PrasannaKumar Muralidharan <prasannatsmkumar@...il.com>,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Roman Sudarikov <roman.sudarikov@...ux.intel.com>,
Russell King <linux@...linux.org.uk>,
Samuel Thibault <samuel.thibault@...-lyon.org>,
Saravana Kannan <saravanak@...gle.com>,
Sebastian Reichel <sre@...nel.org>,
Simon Gaiser <simon@...isiblethingslab.com>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Stefan Achatz <erazor_de@...rs.sourceforge.net>,
Suzuki K Poulose <suzuki.poulose@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Tom Rix <trix@...hat.com>, Tony Luck <tony.luck@...el.com>,
Vaibhav Jain <vaibhav@...ux.ibm.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Wu Hao <hao.wu@...el.com>, ceph-devel@...r.kernel.org,
coresight@...ts.linaro.org, dri-devel@...ts.freedesktop.org,
linux-acpi@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-f2fs-devel@...ts.sourceforge.net, linux-fpga@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-i3c@...ts.infradead.org,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, linux-pm@...r.kernel.org,
linux-remoteproc@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linuxppc-dev@...ts.ozlabs.org, netdev@...r.kernel.org
Subject: Re: [PATCH 30/33] docs: ABI: cleanup several ABI documents
On 10/29/20 8:12 PM, Jonathan Cameron wrote:
> On Wed, 28 Oct 2020 15:23:28 +0100
> Mauro Carvalho Chehab <mchehab+huawei@...nel.org> wrote:
>
>> There are some ABI documents that, while they don't generate
>> any warnings, they have issues when parsed by get_abi.pl script
>> on its output result.
>>
>> Address them, in order to provide a clean output.
>>
>> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
>
> All the IIO ones look sensible. Thanks
>
> Acked-by: Jonathan Cameron <Jonathan.Cameron@...wei.com> #for IIO
Those nit changes for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 looks fine to me.
Reviewed-By: Kajol Jain<kjain@...ux.ibm.com>
Thanks,
Kajol Jain
>
>> ---
>> Documentation/ABI/obsolete/sysfs-class-dax | 8 +-
>> .../ABI/obsolete/sysfs-driver-hid-roccat-pyra | 3 +
>> Documentation/ABI/removed/devfs | 1 +
>> Documentation/ABI/removed/raw1394 | 1 +
>> Documentation/ABI/removed/sysfs-class-rfkill | 2 +-
>> Documentation/ABI/removed/video1394 | 1 +
>> Documentation/ABI/stable/firewire-cdev | 63 ++---
>> Documentation/ABI/stable/sysfs-acpi-pmprofile | 4 +-
>> Documentation/ABI/stable/sysfs-bus-w1 | 1 +
>> Documentation/ABI/stable/sysfs-class-tpm | 4 +-
>> Documentation/ABI/stable/sysfs-driver-speakup | 4 +
>> Documentation/ABI/testing/configfs-most | 135 +++++++----
>> .../ABI/testing/configfs-usb-gadget-ecm | 12 +-
>> .../ABI/testing/configfs-usb-gadget-eem | 10 +-
>> .../ABI/testing/configfs-usb-gadget-loopback | 6 +-
>> .../testing/configfs-usb-gadget-mass-storage | 18 +-
>> .../ABI/testing/configfs-usb-gadget-midi | 14 +-
>> .../ABI/testing/configfs-usb-gadget-printer | 6 +-
>> .../testing/configfs-usb-gadget-sourcesink | 18 +-
>> .../ABI/testing/configfs-usb-gadget-subset | 10 +-
>> .../ABI/testing/configfs-usb-gadget-uac2 | 14 +-
>> .../ABI/testing/configfs-usb-gadget-uvc | 2 +-
>> .../ABI/testing/debugfs-cec-error-inj | 2 +-
>> .../ABI/testing/debugfs-driver-habanalabs | 12 +-
>> .../ABI/testing/debugfs-pfo-nx-crypto | 28 +--
>> Documentation/ABI/testing/debugfs-pktcdvd | 2 +-
>> .../ABI/testing/debugfs-turris-mox-rwtm | 10 +-
>> Documentation/ABI/testing/debugfs-wilco-ec | 21 +-
>> Documentation/ABI/testing/dell-smbios-wmi | 32 +--
>> Documentation/ABI/testing/gpio-cdev | 13 +-
>> Documentation/ABI/testing/procfs-diskstats | 6 +-
>> Documentation/ABI/testing/procfs-smaps_rollup | 48 ++--
>> Documentation/ABI/testing/pstore | 19 +-
>> Documentation/ABI/testing/sysfs-block-rnbd | 4 +-
>> Documentation/ABI/testing/sysfs-bus-acpi | 1 +
>> .../testing/sysfs-bus-coresight-devices-etb10 | 5 +-
>> Documentation/ABI/testing/sysfs-bus-css | 3 +
>> Documentation/ABI/testing/sysfs-bus-dfl | 2 +
>> .../sysfs-bus-event_source-devices-hv_24x7 | 6 +-
>> .../sysfs-bus-event_source-devices-hv_gpci | 7 +-
>> Documentation/ABI/testing/sysfs-bus-fcoe | 68 ++++--
>> Documentation/ABI/testing/sysfs-bus-fsl-mc | 12 +-
>> .../ABI/testing/sysfs-bus-i2c-devices-fsa9480 | 26 +-
>> Documentation/ABI/testing/sysfs-bus-i3c | 2 +
>> Documentation/ABI/testing/sysfs-bus-iio | 19 +-
>> .../ABI/testing/sysfs-bus-iio-adc-hi8435 | 5 +
>> .../ABI/testing/sysfs-bus-iio-adc-stm32 | 3 +
>> .../ABI/testing/sysfs-bus-iio-distance-srf08 | 7 +-
>> .../testing/sysfs-bus-iio-frequency-ad9523 | 2 +
>> .../testing/sysfs-bus-iio-frequency-adf4371 | 10 +-
>> .../ABI/testing/sysfs-bus-iio-health-afe440x | 12 +-
>> .../ABI/testing/sysfs-bus-iio-light-isl29018 | 6 +-
>> .../testing/sysfs-bus-intel_th-devices-gth | 11 +-
>> Documentation/ABI/testing/sysfs-bus-papr-pmem | 23 +-
>> Documentation/ABI/testing/sysfs-bus-pci | 22 +-
>> .../ABI/testing/sysfs-bus-pci-devices-catpt | 1 +
>> .../testing/sysfs-bus-pci-drivers-ehci_hcd | 4 +-
>> Documentation/ABI/testing/sysfs-bus-rbd | 37 ++-
>> Documentation/ABI/testing/sysfs-bus-siox | 3 +
>> .../ABI/testing/sysfs-bus-thunderbolt | 18 +-
>> Documentation/ABI/testing/sysfs-bus-usb | 2 +
>> .../sysfs-class-backlight-driver-lm3533 | 26 +-
>> Documentation/ABI/testing/sysfs-class-bdi | 1 -
>> .../ABI/testing/sysfs-class-chromeos | 15 +-
>> Documentation/ABI/testing/sysfs-class-cxl | 8 +-
>> Documentation/ABI/testing/sysfs-class-devlink | 30 ++-
>> Documentation/ABI/testing/sysfs-class-extcon | 34 +--
>> .../ABI/testing/sysfs-class-fpga-manager | 5 +-
>> Documentation/ABI/testing/sysfs-class-gnss | 2 +
>> Documentation/ABI/testing/sysfs-class-led | 1 +
>> .../testing/sysfs-class-led-driver-el15203000 | 30 +--
>> .../ABI/testing/sysfs-class-led-driver-lm3533 | 44 ++--
>> .../ABI/testing/sysfs-class-led-flash | 27 ++-
>> .../testing/sysfs-class-led-trigger-netdev | 7 +
>> .../testing/sysfs-class-led-trigger-usbport | 1 +
>> .../ABI/testing/sysfs-class-leds-gt683r | 8 +-
>> Documentation/ABI/testing/sysfs-class-net | 61 +++--
>> .../ABI/testing/sysfs-class-net-cdc_ncm | 6 +-
>> .../ABI/testing/sysfs-class-net-phydev | 2 +
>> Documentation/ABI/testing/sysfs-class-pktcdvd | 36 +--
>> Documentation/ABI/testing/sysfs-class-power | 12 +-
>> .../ABI/testing/sysfs-class-power-mp2629 | 1 +
>> .../ABI/testing/sysfs-class-power-twl4030 | 4 +-
>> Documentation/ABI/testing/sysfs-class-rapidio | 46 ++--
>> .../ABI/testing/sysfs-class-regulator | 36 +--
>> .../ABI/testing/sysfs-class-remoteproc | 14 +-
>> ...ysfs-class-rtc-rtc0-device-rtc_calibration | 1 +
>> Documentation/ABI/testing/sysfs-class-uwb_rc | 13 +-
>> .../ABI/testing/sysfs-class-watchdog | 7 +-
>> Documentation/ABI/testing/sysfs-dev | 7 +-
>> .../ABI/testing/sysfs-devices-mapping | 41 ++--
>> .../ABI/testing/sysfs-devices-memory | 15 +-
>> .../sysfs-devices-platform-_UDC_-gadget | 10 +-
>> .../ABI/testing/sysfs-devices-platform-ipmi | 52 ++--
>> .../ABI/testing/sysfs-devices-system-cpu | 4 +-
>> .../ABI/testing/sysfs-driver-hid-lenovo | 10 +
>> .../ABI/testing/sysfs-driver-hid-ntrig | 13 +-
>> .../ABI/testing/sysfs-driver-hid-roccat-kone | 19 ++
>> .../ABI/testing/sysfs-driver-hid-wiimote | 1 +
>> .../ABI/testing/sysfs-driver-input-exc3000 | 2 +
>> .../ABI/testing/sysfs-driver-jz4780-efuse | 6 +-
>> .../ABI/testing/sysfs-driver-pciback | 6 +-
>> Documentation/ABI/testing/sysfs-driver-ufs | 228 ++++++++++++++----
>> .../ABI/testing/sysfs-driver-w1_ds28e17 | 3 +
>> Documentation/ABI/testing/sysfs-firmware-acpi | 16 +-
>> .../ABI/testing/sysfs-firmware-efi-esrt | 28 ++-
>> .../testing/sysfs-firmware-efi-runtime-map | 14 +-
>> .../ABI/testing/sysfs-firmware-qemu_fw_cfg | 20 +-
>> Documentation/ABI/testing/sysfs-firmware-sfi | 6 +-
>> .../ABI/testing/sysfs-firmware-sgi_uv | 6 +-
>> Documentation/ABI/testing/sysfs-fs-f2fs | 48 ++--
>> Documentation/ABI/testing/sysfs-kernel-mm-ksm | 5 +-
>> Documentation/ABI/testing/sysfs-kernel-slab | 3 +
>> Documentation/ABI/testing/sysfs-module | 17 +-
>> .../ABI/testing/sysfs-platform-dell-laptop | 10 +-
>> .../ABI/testing/sysfs-platform-dell-smbios | 4 +-
>> .../testing/sysfs-platform-i2c-demux-pinctrl | 4 +-
>> Documentation/ABI/testing/sysfs-platform-kim | 1 +
>> .../testing/sysfs-platform-phy-rcar-gen3-usb2 | 10 +-
>> .../ABI/testing/sysfs-platform-renesas_usb3 | 10 +-
>> Documentation/ABI/testing/sysfs-power | 21 +-
>> Documentation/ABI/testing/sysfs-profiling | 2 +-
>> Documentation/ABI/testing/sysfs-wusb_cbaf | 3 +-
>> Documentation/ABI/testing/usb-charger-uevent | 82 ++++---
>> Documentation/ABI/testing/usb-uevent | 32 +--
>> scripts/get_abi.pl | 2 -
>> 126 files changed, 1323 insertions(+), 767 deletions(-)
>>
>> diff --git a/Documentation/ABI/obsolete/sysfs-class-dax b/Documentation/ABI/obsolete/sysfs-class-dax
>> index 2cb9fc5e8bd1..0faf1354cd05 100644
>> --- a/Documentation/ABI/obsolete/sysfs-class-dax
>> +++ b/Documentation/ABI/obsolete/sysfs-class-dax
>> @@ -8,11 +8,11 @@ Description: Device DAX is the device-centric analogue of Filesystem
>> system. Device DAX is strict, precise and predictable.
>> Specifically this interface:
>>
>> - 1/ Guarantees fault granularity with respect to a given
>> - page size (pte, pmd, or pud) set at configuration time.
>> + 1. Guarantees fault granularity with respect to a given
>> + page size (pte, pmd, or pud) set at configuration time.
>>
>> - 2/ Enforces deterministic behavior by being strict about
>> - what fault scenarios are supported.
>> + 2. Enforces deterministic behavior by being strict about
>> + what fault scenarios are supported.
>>
>> The /sys/class/dax/ interface enumerates all the
>> device-dax instances in the system. The ABI is
>> diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
>> index 5d41ebadf15e..66545c587a64 100644
>> --- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
>> +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
>> @@ -7,10 +7,13 @@ Description: It is possible to switch the cpi setting of the mouse with the
>> setting reported by the mouse. This number has to be further
>> processed to receive the real dpi value:
>>
>> + ===== ====
>> VALUE DPI
>> + ===== ====
>> 1 400
>> 2 800
>> 4 1600
>> + ===== ====
>>
>> This file is readonly.
>> Has never been used. If bookkeeping is done, it's done in userland tools.
>> diff --git a/Documentation/ABI/removed/devfs b/Documentation/ABI/removed/devfs
>> index 0020c49933c4..24fb35adf277 100644
>> --- a/Documentation/ABI/removed/devfs
>> +++ b/Documentation/ABI/removed/devfs
>> @@ -5,6 +5,7 @@ Description:
>> devfs has been unmaintained for a number of years, has unfixable
>> races, contains a naming policy within the kernel that is
>> against the LSB, and can be replaced by using udev.
>> +
>> The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
>> along with the assorted devfs function calls throughout the
>> kernel tree.
>> diff --git a/Documentation/ABI/removed/raw1394 b/Documentation/ABI/removed/raw1394
>> index ec333e676322..9ec7ec493920 100644
>> --- a/Documentation/ABI/removed/raw1394
>> +++ b/Documentation/ABI/removed/raw1394
>> @@ -7,6 +7,7 @@ Description:
>> to implement sensible device security policies, and its low level
>> of abstraction that required userspace clients to duplicate much
>> of the kernel's ieee1394 core functionality.
>> +
>> Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
>> firewire-core.
>>
>> diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill
>> index 9c08c7f98ffb..f25174eafd55 100644
>> --- a/Documentation/ABI/removed/sysfs-class-rfkill
>> +++ b/Documentation/ABI/removed/sysfs-class-rfkill
>> @@ -10,4 +10,4 @@ Description: This file was deprecated because there no longer was a way to
>> claim just control over a single rfkill instance.
>> This file was scheduled to be removed in 2012, and was removed
>> in 2016.
>> -Values: 0: Kernel handles events
>> +Values: 0: Kernel handles events
>> diff --git a/Documentation/ABI/removed/video1394 b/Documentation/ABI/removed/video1394
>> index c39c25aee77b..1905d35a6619 100644
>> --- a/Documentation/ABI/removed/video1394
>> +++ b/Documentation/ABI/removed/video1394
>> @@ -8,6 +8,7 @@ Description:
>> performance issues in its first generation. Any video1394 user had
>> to use raw1394 + libraw1394 too because video1394 did not provide
>> asynchronous I/O for device discovery and configuration.
>> +
>> Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
>> firewire-core.
>>
>> diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev
>> index c9e8ff026154..261f85b13154 100644
>> --- a/Documentation/ABI/stable/firewire-cdev
>> +++ b/Documentation/ABI/stable/firewire-cdev
>> @@ -16,6 +16,7 @@ Description:
>> different scope:
>>
>> - The 1394 node which is associated with the file:
>> +
>> - Asynchronous request transmission
>> - Get the Configuration ROM
>> - Query node ID
>> @@ -23,6 +24,7 @@ Description:
>> and local node
>>
>> - The 1394 bus (i.e. "card") to which the node is attached to:
>> +
>> - Isochronous stream transmission and reception
>> - Asynchronous stream transmission and reception
>> - Asynchronous broadcast request transmission
>> @@ -35,6 +37,7 @@ Description:
>> - Bus reset initiation, bus reset event reception
>>
>> - All 1394 buses:
>> +
>> - Allocation of IEEE 1212 address ranges on the local
>> link layers, reception of inbound requests to such
>> an address range, asynchronous response transmission
>> @@ -59,50 +62,50 @@ Description:
>> The following file operations are supported:
>>
>> open(2)
>> - Currently the only useful flags are O_RDWR.
>> + Currently the only useful flags are O_RDWR.
>>
>> ioctl(2)
>> - Initiate various actions. Some take immediate effect, others
>> - are performed asynchronously while or after the ioctl returns.
>> - See the inline documentation in <linux/firewire-cdev.h> for
>> - descriptions of all ioctls.
>> + Initiate various actions. Some take immediate effect, others
>> + are performed asynchronously while or after the ioctl returns.
>> + See the inline documentation in <linux/firewire-cdev.h> for
>> + descriptions of all ioctls.
>>
>> poll(2), select(2), epoll_wait(2) etc.
>> - Watch for events to become available to be read.
>> + Watch for events to become available to be read.
>>
>> read(2)
>> - Receive various events. There are solicited events like
>> - outbound asynchronous transaction completion or isochronous
>> - buffer completion, and unsolicited events such as bus resets,
>> - request reception, or PHY packet reception. Always use a read
>> - buffer which is large enough to receive the largest event that
>> - could ever arrive. See <linux/firewire-cdev.h> for descriptions
>> - of all event types and for which ioctls affect reception of
>> - events.
>> + Receive various events. There are solicited events like
>> + outbound asynchronous transaction completion or isochronous
>> + buffer completion, and unsolicited events such as bus resets,
>> + request reception, or PHY packet reception. Always use a read
>> + buffer which is large enough to receive the largest event that
>> + could ever arrive. See <linux/firewire-cdev.h> for descriptions
>> + of all event types and for which ioctls affect reception of
>> + events.
>>
>> mmap(2)
>> - Allocate a DMA buffer for isochronous reception or transmission
>> - and map it into the process address space. The arguments should
>> - be used as follows: addr = NULL, length = the desired buffer
>> - size, i.e. number of packets times size of largest packet,
>> - prot = at least PROT_READ for reception and at least PROT_WRITE
>> - for transmission, flags = MAP_SHARED, fd = the handle to the
>> - /dev/fw*, offset = 0.
>> + Allocate a DMA buffer for isochronous reception or transmission
>> + and map it into the process address space. The arguments should
>> + be used as follows: addr = NULL, length = the desired buffer
>> + size, i.e. number of packets times size of largest packet,
>> + prot = at least PROT_READ for reception and at least PROT_WRITE
>> + for transmission, flags = MAP_SHARED, fd = the handle to the
>> + /dev/fw*, offset = 0.
>>
>> Isochronous reception works in packet-per-buffer fashion except
>> for multichannel reception which works in buffer-fill mode.
>>
>> munmap(2)
>> - Unmap the isochronous I/O buffer from the process address space.
>> + Unmap the isochronous I/O buffer from the process address space.
>>
>> close(2)
>> - Besides stopping and freeing I/O contexts that were associated
>> - with the file descriptor, back out any changes to the local
>> - nodes' Configuration ROM. Deallocate isochronous channels and
>> - bandwidth at the IRM that were marked for kernel-assisted
>> - re- and deallocation.
>> + Besides stopping and freeing I/O contexts that were associated
>> + with the file descriptor, back out any changes to the local
>> + nodes' Configuration ROM. Deallocate isochronous channels and
>> + bandwidth at the IRM that were marked for kernel-assisted
>> + re- and deallocation.
>>
>> -Users: libraw1394
>> - libdc1394
>> - libhinawa
>> +Users: libraw1394;
>> + libdc1394;
>> + libhinawa;
>> tools like linux-firewire-utils, fwhack, ...
>> diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile
>> index fd97d22b677f..2d6314f0e4e4 100644
>> --- a/Documentation/ABI/stable/sysfs-acpi-pmprofile
>> +++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile
>> @@ -1,8 +1,8 @@
>> -What: /sys/firmware/acpi/pm_profile
>> +What: /sys/firmware/acpi/pm_profile
>> Date: 03-Nov-2011
>> KernelVersion: v3.2
>> Contact: linux-acpi@...r.kernel.org
>> -Description: The ACPI pm_profile sysfs interface exports the platform
>> +Description: The ACPI pm_profile sysfs interface exports the platform
>> power management (and performance) requirement expectations
>> as provided by BIOS. The integer value is directly passed as
>> retrieved from the FADT ACPI table.
>> diff --git a/Documentation/ABI/stable/sysfs-bus-w1 b/Documentation/ABI/stable/sysfs-bus-w1
>> index 992dfb183ed0..5cd5e872bcae 100644
>> --- a/Documentation/ABI/stable/sysfs-bus-w1
>> +++ b/Documentation/ABI/stable/sysfs-bus-w1
>> @@ -6,6 +6,7 @@ Description: Bus scanning interval, microseconds component.
>> control systems are attached/generate presence for as short as
>> 100 ms - hence the tens-to-hundreds milliseconds scan intervals
>> are required.
>> +
>> see Documentation/w1/w1-generic.rst for detailed information.
>> Users: any user space application which wants to know bus scanning
>> interval
>> diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
>> index ec464cf7861a..91ca63ec7581 100644
>> --- a/Documentation/ABI/stable/sysfs-class-tpm
>> +++ b/Documentation/ABI/stable/sysfs-class-tpm
>> @@ -191,6 +191,6 @@ Contact: linux-integrity@...r.kernel.org
>> Description: The "tpm_version_major" property shows the TCG spec major version
>> implemented by the TPM device.
>>
>> - Example output:
>> + Example output::
>>
>> - 2
>> + 2
>> diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup
>> index c6a32c434ce9..792f58ba327d 100644
>> --- a/Documentation/ABI/stable/sysfs-driver-speakup
>> +++ b/Documentation/ABI/stable/sysfs-driver-speakup
>> @@ -69,6 +69,7 @@ Description: Controls if typing interrupts output from speakup. With
>> speakup if for example
>> the say screen command is used before the
>> entire screen is read.
>> +
>> With no_interrupt set to one, if the say
>> screen command is used, and one then types on the keyboard,
>> speakup will continue to say the whole screen regardless until
>> @@ -215,8 +216,10 @@ Description: This file contains names for key states.
>> Again, these are part of the help system. For instance, if you
>> had pressed speakup + keypad 3, you would hear:
>> "speakup keypad 3 is go to bottom edge."
>> +
>> The speakup key is depressed, so the name of the key state is
>> speakup.
>> +
>> This part of the message comes from the states collection.
>>
>> What: /sys/accessibility/speakup/i18n/characters
>> @@ -297,6 +300,7 @@ KernelVersion: 2.6
>> Contact: speakup@...ux-speakup.org
>> Description: Controls if punctuation is spoken by speakup, or by the
>> synthesizer.
>> +
>> For example, speakup speaks ">" as "greater", while
>> the espeak synthesizer used by the soft driver speaks "greater
>> than". Zero lets speakup speak the punctuation. One lets the
>> diff --git a/Documentation/ABI/testing/configfs-most b/Documentation/ABI/testing/configfs-most
>> index ed67a4d9f6d6..bc6b8bd18da4 100644
>> --- a/Documentation/ABI/testing/configfs-most
>> +++ b/Documentation/ABI/testing/configfs-most
>> @@ -15,22 +15,28 @@ KernelVersion: 5.2
>> Description:
>> The attributes:
>>
>> - buffer_size configure the buffer size for this channel
>> + buffer_size
>> + configure the buffer size for this channel
>>
>> - subbuffer_size configure the sub-buffer size for this channel
>> + subbuffer_size
>> + configure the sub-buffer size for this channel
>> (needed for synchronous and isochrnous data)
>>
>>
>> - num_buffers configure number of buffers used for this
>> + num_buffers
>> + configure number of buffers used for this
>> channel
>>
>> - datatype configure type of data that will travel over
>> + datatype
>> + configure type of data that will travel over
>> this channel
>>
>> - direction configure whether this link will be an input
>> + direction
>> + configure whether this link will be an input
>> or output
>>
>> - dbr_size configure DBR data buffer size (this is used
>> + dbr_size
>> + configure DBR data buffer size (this is used
>> for MediaLB communication only)
>>
>> packets_per_xact
>> @@ -39,18 +45,23 @@ Description:
>> transmitted via USB (this is used for USB
>> communication only)
>>
>> - device name of the device the link is to be attached to
>> + device
>> + name of the device the link is to be attached to
>>
>> - channel name of the channel the link is to be attached to
>> + channel
>> + name of the channel the link is to be attached to
>>
>> - comp_params pass parameters needed by some components
>> + comp_params
>> + pass parameters needed by some components
>>
>> - create_link write '1' to this attribute to trigger the
>> + create_link
>> + write '1' to this attribute to trigger the
>> creation of the link. In case of speculative
>> configuration, the creation is post-poned until
>> a physical device is being attached to the bus.
>>
>> - destroy_link write '1' to this attribute to destroy an
>> + destroy_link
>> + write '1' to this attribute to destroy an
>> active link
>>
>> What: /sys/kernel/config/most_video/<link>
>> @@ -59,22 +70,28 @@ KernelVersion: 5.2
>> Description:
>> The attributes:
>>
>> - buffer_size configure the buffer size for this channel
>> + buffer_size
>> + configure the buffer size for this channel
>>
>> - subbuffer_size configure the sub-buffer size for this channel
>> + subbuffer_size
>> + configure the sub-buffer size for this channel
>> (needed for synchronous and isochrnous data)
>>
>>
>> - num_buffers configure number of buffers used for this
>> + num_buffers
>> + configure number of buffers used for this
>> channel
>>
>> - datatype configure type of data that will travel over
>> + datatype
>> + configure type of data that will travel over
>> this channel
>>
>> - direction configure whether this link will be an input
>> + direction
>> + configure whether this link will be an input
>> or output
>>
>> - dbr_size configure DBR data buffer size (this is used
>> + dbr_size
>> + configure DBR data buffer size (this is used
>> for MediaLB communication only)
>>
>> packets_per_xact
>> @@ -83,18 +100,23 @@ Description:
>> transmitted via USB (this is used for USB
>> communication only)
>>
>> - device name of the device the link is to be attached to
>> + device
>> + name of the device the link is to be attached to
>>
>> - channel name of the channel the link is to be attached to
>> + channel
>> + name of the channel the link is to be attached to
>>
>> - comp_params pass parameters needed by some components
>> + comp_params
>> + pass parameters needed by some components
>>
>> - create_link write '1' to this attribute to trigger the
>> + create_link
>> + write '1' to this attribute to trigger the
>> creation of the link. In case of speculative
>> configuration, the creation is post-poned until
>> a physical device is being attached to the bus.
>>
>> - destroy_link write '1' to this attribute to destroy an
>> + destroy_link
>> + write '1' to this attribute to destroy an
>> active link
>>
>> What: /sys/kernel/config/most_net/<link>
>> @@ -103,22 +125,28 @@ KernelVersion: 5.2
>> Description:
>> The attributes:
>>
>> - buffer_size configure the buffer size for this channel
>> + buffer_size
>> + configure the buffer size for this channel
>>
>> - subbuffer_size configure the sub-buffer size for this channel
>> + subbuffer_size
>> + configure the sub-buffer size for this channel
>> (needed for synchronous and isochrnous data)
>>
>>
>> - num_buffers configure number of buffers used for this
>> + num_buffers
>> + configure number of buffers used for this
>> channel
>>
>> - datatype configure type of data that will travel over
>> + datatype
>> + configure type of data that will travel over
>> this channel
>>
>> - direction configure whether this link will be an input
>> + direction
>> + configure whether this link will be an input
>> or output
>>
>> - dbr_size configure DBR data buffer size (this is used
>> + dbr_size
>> + configure DBR data buffer size (this is used
>> for MediaLB communication only)
>>
>> packets_per_xact
>> @@ -127,18 +155,23 @@ Description:
>> transmitted via USB (this is used for USB
>> communication only)
>>
>> - device name of the device the link is to be attached to
>> + device
>> + name of the device the link is to be attached to
>>
>> - channel name of the channel the link is to be attached to
>> + channel
>> + name of the channel the link is to be attached to
>>
>> - comp_params pass parameters needed by some components
>> + comp_params
>> + pass parameters needed by some components
>>
>> - create_link write '1' to this attribute to trigger the
>> + create_link
>> + write '1' to this attribute to trigger the
>> creation of the link. In case of speculative
>> configuration, the creation is post-poned until
>> a physical device is being attached to the bus.
>>
>> - destroy_link write '1' to this attribute to destroy an
>> + destroy_link
>> + write '1' to this attribute to destroy an
>> active link
>>
>> What: /sys/kernel/config/most_sound/<card>
>> @@ -147,7 +180,8 @@ KernelVersion: 5.2
>> Description:
>> The attributes:
>>
>> - create_card write '1' to this attribute to trigger the
>> + create_card
>> + write '1' to this attribute to trigger the
>> registration of the sound card with the ALSA
>> subsystem.
>>
>> @@ -157,22 +191,28 @@ KernelVersion: 5.2
>> Description:
>> The attributes:
>>
>> - buffer_size configure the buffer size for this channel
>> + buffer_size
>> + configure the buffer size for this channel
>>
>> - subbuffer_size configure the sub-buffer size for this channel
>> + subbuffer_size
>> + configure the sub-buffer size for this channel
>> (needed for synchronous and isochrnous data)
>>
>>
>> - num_buffers configure number of buffers used for this
>> + num_buffers
>> + configure number of buffers used for this
>> channel
>>
>> - datatype configure type of data that will travel over
>> + datatype
>> + configure type of data that will travel over
>> this channel
>>
>> - direction configure whether this link will be an input
>> + direction
>> + configure whether this link will be an input
>> or output
>>
>> - dbr_size configure DBR data buffer size (this is used
>> + dbr_size
>> + configure DBR data buffer size (this is used
>> for MediaLB communication only)
>>
>> packets_per_xact
>> @@ -181,16 +221,21 @@ Description:
>> transmitted via USB (this is used for USB
>> communication only)
>>
>> - device name of the device the link is to be attached to
>> + device
>> + name of the device the link is to be attached to
>>
>> - channel name of the channel the link is to be attached to
>> + channel
>> + name of the channel the link is to be attached to
>>
>> - comp_params pass parameters needed by some components
>> + comp_params
>> + pass parameters needed by some components
>>
>> - create_link write '1' to this attribute to trigger the
>> + create_link
>> + write '1' to this attribute to trigger the
>> creation of the link. In case of speculative
>> configuration, the creation is post-poned until
>> a physical device is being attached to the bus.
>>
>> - destroy_link write '1' to this attribute to destroy an
>> + destroy_link
>> + write '1' to this attribute to destroy an
>> active link
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ecm b/Documentation/ABI/testing/configfs-usb-gadget-ecm
>> index 0addf7704b4c..272bc1e4ce2e 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-ecm
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-ecm
>> @@ -4,13 +4,17 @@ KernelVersion: 3.11
>> Description:
>> The attributes:
>>
>> - ifname - network device interface name associated with
>> + ifname
>> + - network device interface name associated with
>> this function instance
>> - qmult - queue length multiplier for high and
>> + qmult
>> + - queue length multiplier for high and
>> super speed
>> - host_addr - MAC address of host's end of this
>> + host_addr
>> + - MAC address of host's end of this
>> Ethernet over USB link
>> - dev_addr - MAC address of device's end of this
>> + dev_addr
>> + - MAC address of device's end of this
>> Ethernet over USB link
>>
>>
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-eem b/Documentation/ABI/testing/configfs-usb-gadget-eem
>> index a4c57158fcde..178c3d5fb647 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-eem
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-eem
>> @@ -4,11 +4,13 @@ KernelVersion: 3.11
>> Description:
>> The attributes:
>>
>> - ifname - network device interface name associated with
>> + ========== =============================================
>> + ifname network device interface name associated with
>> this function instance
>> - qmult - queue length multiplier for high and
>> + qmult queue length multiplier for high and
>> super speed
>> - host_addr - MAC address of host's end of this
>> + host_addr MAC address of host's end of this
>> Ethernet over USB link
>> - dev_addr - MAC address of device's end of this
>> + dev_addr MAC address of device's end of this
>> Ethernet over USB link
>> + ========== =============================================
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback
>> index 06beefbcf061..e6c6ba5ac7ff 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-loopback
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback
>> @@ -4,5 +4,7 @@ KernelVersion: 3.13
>> Description:
>> The attributes:
>>
>> - qlen - depth of loopback queue
>> - buflen - buffer length
>> + ======= =======================
>> + qlen depth of loopback queue
>> + buflen buffer length
>> + ======= =======================
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
>> index 9931fb0d63ba..c86b63a7bb43 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
>> @@ -4,12 +4,14 @@ KernelVersion: 3.13
>> Description:
>> The attributes:
>>
>> - stall - Set to permit function to halt bulk endpoints.
>> + =========== ==============================================
>> + stall Set to permit function to halt bulk endpoints.
>> Disabled on some USB devices known not to work
>> correctly. You should set it to true.
>> - num_buffers - Number of pipeline buffers. Valid numbers
>> + num_buffers Number of pipeline buffers. Valid numbers
>> are 2..4. Available only if
>> CONFIG_USB_GADGET_DEBUG_FILES is set.
>> + =========== ==============================================
>>
>> What: /config/usb-gadget/gadget/functions/mass_storage.name/lun.name
>> Date: Oct 2013
>> @@ -17,15 +19,17 @@ KernelVersion: 3.13
>> Description:
>> The attributes:
>>
>> - file - The path to the backing file for the LUN.
>> + =========== ==============================================
>> + file The path to the backing file for the LUN.
>> Required if LUN is not marked as removable.
>> - ro - Flag specifying access to the LUN shall be
>> + ro Flag specifying access to the LUN shall be
>> read-only. This is implied if CD-ROM emulation
>> is enabled as well as when it was impossible
>> to open "filename" in R/W mode.
>> - removable - Flag specifying that LUN shall be indicated as
>> + removable Flag specifying that LUN shall be indicated as
>> being removable.
>> - cdrom - Flag specifying that LUN shall be reported as
>> + cdrom Flag specifying that LUN shall be reported as
>> being a CD-ROM.
>> - nofua - Flag specifying that FUA flag
>> + nofua Flag specifying that FUA flag
>> in SCSI WRITE(10,12)
>> + =========== ==============================================
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-midi b/Documentation/ABI/testing/configfs-usb-gadget-midi
>> index 6b341df7249c..07389cddd51a 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-midi
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-midi
>> @@ -4,9 +4,11 @@ KernelVersion: 3.19
>> Description:
>> The attributes:
>>
>> - index - index value for the USB MIDI adapter
>> - id - ID string for the USB MIDI adapter
>> - buflen - MIDI buffer length
>> - qlen - USB read request queue length
>> - in_ports - number of MIDI input ports
>> - out_ports - number of MIDI output ports
>> + ========== ====================================
>> + index index value for the USB MIDI adapter
>> + id ID string for the USB MIDI adapter
>> + buflen MIDI buffer length
>> + qlen USB read request queue length
>> + in_ports number of MIDI input ports
>> + out_ports number of MIDI output ports
>> + ========== ====================================
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-printer b/Documentation/ABI/testing/configfs-usb-gadget-printer
>> index 6b0714e3c605..7aa731bac2da 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-printer
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-printer
>> @@ -4,6 +4,8 @@ KernelVersion: 4.1
>> Description:
>> The attributes:
>>
>> - pnp_string - Data to be passed to the host in pnp string
>> - q_len - Number of requests per endpoint
>> + ========== ===========================================
>> + pnp_string Data to be passed to the host in pnp string
>> + q_len Number of requests per endpoint
>> + ========== ===========================================
>>
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
>> index f56335af2d88..1f3d31b607b7 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
>> @@ -4,11 +4,13 @@ KernelVersion: 3.13
>> Description:
>> The attributes:
>>
>> - pattern - 0 (all zeros), 1 (mod63), 2 (none)
>> - isoc_interval - 1..16
>> - isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss)
>> - isoc_mult - 0..2 (hs/ss only)
>> - isoc_maxburst - 0..15 (ss only)
>> - buflen - buffer length
>> - bulk_qlen - depth of queue for bulk
>> - iso_qlen - depth of queue for iso
>> + ============== ==================================
>> + pattern 0 (all zeros), 1 (mod63), 2 (none)
>> + isoc_interval 1..16
>> + isoc_maxpacket 0 - 1023 (fs), 0 - 1024 (hs/ss)
>> + isoc_mult 0..2 (hs/ss only)
>> + isoc_maxburst 0..15 (ss only)
>> + buflen buffer length
>> + bulk_qlen depth of queue for bulk
>> + iso_qlen depth of queue for iso
>> + ============== ==================================
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-subset b/Documentation/ABI/testing/configfs-usb-gadget-subset
>> index 9373e2c51ea4..0061b864351f 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-subset
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-subset
>> @@ -4,11 +4,13 @@ KernelVersion: 3.11
>> Description:
>> The attributes:
>>
>> - ifname - network device interface name associated with
>> + ========== =============================================
>> + ifname network device interface name associated with
>> this function instance
>> - qmult - queue length multiplier for high and
>> + qmult queue length multiplier for high and
>> super speed
>> - host_addr - MAC address of host's end of this
>> + host_addr MAC address of host's end of this
>> Ethernet over USB link
>> - dev_addr - MAC address of device's end of this
>> + dev_addr MAC address of device's end of this
>> Ethernet over USB link
>> + ========== =============================================
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2
>> index 2bfdd4efa9bd..d4356c8b8cd6 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-uac2
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2
>> @@ -4,9 +4,11 @@ KernelVersion: 3.18
>> Description:
>> The attributes:
>>
>> - c_chmask - capture channel mask
>> - c_srate - capture sampling rate
>> - c_ssize - capture sample size (bytes)
>> - p_chmask - playback channel mask
>> - p_srate - playback sampling rate
>> - p_ssize - playback sample size (bytes)
>> + ========= ============================
>> + c_chmask capture channel mask
>> + c_srate capture sampling rate
>> + c_ssize capture sample size (bytes)
>> + p_chmask playback channel mask
>> + p_srate playback sampling rate
>> + p_ssize playback sample size (bytes)
>> + ========= ============================
>> diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
>> index cee81b0347bb..ac5e11af79a8 100644
>> --- a/Documentation/ABI/testing/configfs-usb-gadget-uvc
>> +++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
>> @@ -55,7 +55,7 @@ Description: Default output terminal descriptors
>>
>> ============== =============================================
>> iTerminal index of string descriptor
>> - bSourceID id of the terminal to which this terminal
>> + bSourceID id of the terminal to which this terminal
>> is connected
>> bAssocTerminal id of the input terminal to which this output
>> terminal is associated
>> diff --git a/Documentation/ABI/testing/debugfs-cec-error-inj b/Documentation/ABI/testing/debugfs-cec-error-inj
>> index 5afcd78fbdb7..8debcb08a3b5 100644
>> --- a/Documentation/ABI/testing/debugfs-cec-error-inj
>> +++ b/Documentation/ABI/testing/debugfs-cec-error-inj
>> @@ -23,7 +23,7 @@ error injections without having to know the details of the driver-specific
>> commands.
>>
>> Note that the output of 'error-inj' shall be valid as input to 'error-inj'.
>> -So this must work:
>> +So this must work::
>>
>> $ cat error-inj >einj.txt
>> $ cat einj.txt >error-inj
>> diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
>> index 2e9ae311e02d..c5d678d39144 100644
>> --- a/Documentation/ABI/testing/debugfs-driver-habanalabs
>> +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
>> @@ -20,9 +20,13 @@ Description: Allow the root user to disable/enable in runtime the clock
>> The user can supply a bitmask value, each bit represents
>> a different engine to disable/enable its clock gating feature.
>> The bitmask is composed of 20 bits:
>> - 0 - 7 : DMA channels
>> - 8 - 11 : MME engines
>> - 12 - 19 : TPC engines
>> +
>> + ======= ============
>> + 0 - 7 DMA channels
>> + 8 - 11 MME engines
>> + 12 - 19 TPC engines
>> + ======= ============
>> +
>> The bit's location of a specific engine can be determined
>> using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values
>> are defined in uapi habanalabs.h file in enum gaudi_engine_id
>> @@ -59,6 +63,7 @@ Description: Allows the root user to read or write directly through the
>> the generic Linux user-space PCI mapping) because the DDR bar
>> is very small compared to the DDR memory and only the driver can
>> move the bar before and after the transaction.
>> +
>> If the IOMMU is disabled, it also allows the root user to read
>> or write from the host a device VA of a host mapped memory
>>
>> @@ -73,6 +78,7 @@ Description: Allows the root user to read or write 64 bit data directly
>> the generic Linux user-space PCI mapping) because the DDR bar
>> is very small compared to the DDR memory and only the driver can
>> move the bar before and after the transaction.
>> +
>> If the IOMMU is disabled, it also allows the root user to read
>> or write from the host a device VA of a host mapped memory
>>
>> diff --git a/Documentation/ABI/testing/debugfs-pfo-nx-crypto b/Documentation/ABI/testing/debugfs-pfo-nx-crypto
>> index 685d5a448423..f75a655c1531 100644
>> --- a/Documentation/ABI/testing/debugfs-pfo-nx-crypto
>> +++ b/Documentation/ABI/testing/debugfs-pfo-nx-crypto
>> @@ -4,42 +4,42 @@ KernelVersion: 3.4
>> Contact: Kent Yoder <key@...ux.vnet.ibm.com>
>> Description:
>>
>> - These debugfs interfaces are built by the nx-crypto driver, built in
>> +These debugfs interfaces are built by the nx-crypto driver, built in
>> arch/powerpc/crypto/nx.
>>
>> Error Detection
>> ===============
>>
>> errors:
>> -- A u32 providing a total count of errors since the driver was loaded. The
>> -only errors counted here are those returned from the hcall, H_COP_OP.
>> + A u32 providing a total count of errors since the driver was loaded. The
>> + only errors counted here are those returned from the hcall, H_COP_OP.
>>
>> last_error:
>> -- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
>> -recorded here (the hcall will retry until -EBUSY goes away).
>> + The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
>> + recorded here (the hcall will retry until -EBUSY goes away).
>>
>> last_error_pid:
>> -- The process ID of the process who received the most recent error from the
>> -hcall.
>> + The process ID of the process who received the most recent error from the
>> + hcall.
>>
>> Device Use
>> ==========
>>
>> aes_bytes:
>> -- The total number of bytes encrypted using AES in any of the driver's
>> -supported modes.
>> + The total number of bytes encrypted using AES in any of the driver's
>> + supported modes.
>>
>> aes_ops:
>> -- The total number of AES operations submitted to the hardware.
>> + The total number of AES operations submitted to the hardware.
>>
>> sha256_bytes:
>> -- The total number of bytes hashed by the hardware using SHA-256.
>> + The total number of bytes hashed by the hardware using SHA-256.
>>
>> sha256_ops:
>> -- The total number of SHA-256 operations submitted to the hardware.
>> + The total number of SHA-256 operations submitted to the hardware.
>>
>> sha512_bytes:
>> -- The total number of bytes hashed by the hardware using SHA-512.
>> + The total number of bytes hashed by the hardware using SHA-512.
>>
>> sha512_ops:
>> -- The total number of SHA-512 operations submitted to the hardware.
>> + The total number of SHA-512 operations submitted to the hardware.
>> diff --git a/Documentation/ABI/testing/debugfs-pktcdvd b/Documentation/ABI/testing/debugfs-pktcdvd
>> index 787907d70462..f6f65a4faea0 100644
>> --- a/Documentation/ABI/testing/debugfs-pktcdvd
>> +++ b/Documentation/ABI/testing/debugfs-pktcdvd
>> @@ -10,7 +10,7 @@ these files in debugfs:
>> /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
>>
>> ==== ====== ====================================
>> - info (0444) Lots of driver statistics and infos.
>> + info 0444 Lots of driver statistics and infos.
>> ==== ====== ====================================
>>
>> Example::
>> diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm
>> index c8f7dadd591c..ad08f535af3b 100644
>> --- a/Documentation/ABI/testing/debugfs-turris-mox-rwtm
>> +++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm
>> @@ -2,10 +2,12 @@ What: /sys/kernel/debug/turris-mox-rwtm/do_sign
>> Date: Jun 2020
>> KernelVersion: 5.8
>> Contact: Marek Behún <marek.behun@....cz>
>> -Description: (W)
>> - Message to sign with the ECDSA private key stored in
>> +Description:
>> +
>> + === ===========================================================
>> + (W) Message to sign with the ECDSA private key stored in
>> device's OTP. The message must be exactly 64 bytes (since
>> this is intended for SHA-512 hashes).
>> - (R)
>> - The resulting signature, 136 bytes. This contains the R and
>> + (R) The resulting signature, 136 bytes. This contains the R and
>> S values of the ECDSA signature, both in big-endian format.
>> + === ===========================================================
>> diff --git a/Documentation/ABI/testing/debugfs-wilco-ec b/Documentation/ABI/testing/debugfs-wilco-ec
>> index 9d8d9d2def5b..682e3c09ef4d 100644
>> --- a/Documentation/ABI/testing/debugfs-wilco-ec
>> +++ b/Documentation/ABI/testing/debugfs-wilco-ec
>> @@ -27,16 +27,17 @@ Description:
>> for writing, two for the type and at least a single byte of
>> data.
>>
>> - Example:
>> - // Request EC info type 3 (EC firmware build date)
>> - // Corresponds with sending type 0x00f0 with
>> - // MBOX = [38, 00, 03, 00]
>> - $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
>> - // View the result. The decoded ASCII result "12/21/18" is
>> - // included after the raw hex.
>> - // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
>> - $ cat /sys/kernel/debug/wilco_ec/raw
>> - 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8...
>> + Example::
>> +
>> + // Request EC info type 3 (EC firmware build date)
>> + // Corresponds with sending type 0x00f0 with
>> + // MBOX = [38, 00, 03, 00]
>> + $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
>> + // View the result. The decoded ASCII result "12/21/18" is
>> + // included after the raw hex.
>> + // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
>> + $ cat /sys/kernel/debug/wilco_ec/raw
>> + 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8...
>>
>> Note that the first 16 bytes of the received MBOX[] will be
>> printed, even if some of the data is junk, and skipping bytes
>> diff --git a/Documentation/ABI/testing/dell-smbios-wmi b/Documentation/ABI/testing/dell-smbios-wmi
>> index fc919ce16008..5f3a0dc67050 100644
>> --- a/Documentation/ABI/testing/dell-smbios-wmi
>> +++ b/Documentation/ABI/testing/dell-smbios-wmi
>> @@ -10,29 +10,29 @@ Description:
>> <uapi/linux/wmi.h>
>>
>> 1) To perform an SMBIOS call from userspace, you'll need to
>> - first determine the minimum size of the calling interface
>> - buffer for your machine.
>> - Platforms that contain larger buffers can return larger
>> - objects from the system firmware.
>> - Commonly this size is either 4k or 32k.
>> + first determine the minimum size of the calling interface
>> + buffer for your machine.
>> + Platforms that contain larger buffers can return larger
>> + objects from the system firmware.
>> + Commonly this size is either 4k or 32k.
>>
>> - To determine the size of the buffer read() a u64 dword from
>> - the WMI character device /dev/wmi/dell-smbios.
>> + To determine the size of the buffer read() a u64 dword from
>> + the WMI character device /dev/wmi/dell-smbios.
>>
>> 2) After you've determined the minimum size of the calling
>> - interface buffer, you can allocate a structure that represents
>> - the structure documented above.
>> + interface buffer, you can allocate a structure that represents
>> + the structure documented above.
>>
>> 3) In the 'length' object store the size of the buffer you
>> - determined above and allocated.
>> + determined above and allocated.
>>
>> 4) In this buffer object, prepare as necessary for the SMBIOS
>> - call you're interested in. Typically SMBIOS buffers have
>> - "class", "select", and "input" defined to values that coincide
>> - with the data you are interested in.
>> - Documenting class/select/input values is outside of the scope
>> - of this documentation. Check with the libsmbios project for
>> - further documentation on these values.
>> + call you're interested in. Typically SMBIOS buffers have
>> + "class", "select", and "input" defined to values that coincide
>> + with the data you are interested in.
>> + Documenting class/select/input values is outside of the scope
>> + of this documentation. Check with the libsmbios project for
>> + further documentation on these values.
>>
>> 6) Run the call by using ioctl() as described in the header.
>>
>> diff --git a/Documentation/ABI/testing/gpio-cdev b/Documentation/ABI/testing/gpio-cdev
>> index 7b265fbb47e3..66bdcd188b6c 100644
>> --- a/Documentation/ABI/testing/gpio-cdev
>> +++ b/Documentation/ABI/testing/gpio-cdev
>> @@ -12,15 +12,16 @@ Description:
>> The following file operations are supported:
>>
>> open(2)
>> - Currently the only useful flags are O_RDWR.
>> + Currently the only useful flags are O_RDWR.
>>
>> ioctl(2)
>> - Initiate various actions.
>> - See the inline documentation in [include/uapi]<linux/gpio.h>
>> - for descriptions of all ioctls.
>> + Initiate various actions.
>> +
>> + See the inline documentation in [include/uapi]<linux/gpio.h>
>> + for descriptions of all ioctls.
>>
>> close(2)
>> - Stops and free up the I/O contexts that was associated
>> - with the file descriptor.
>> + Stops and free up the I/O contexts that was associated
>> + with the file descriptor.
>>
>> Users: TBD
>> diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats
>> index df5a3a8c1edf..e58d641443d3 100644
>> --- a/Documentation/ABI/testing/procfs-diskstats
>> +++ b/Documentation/ABI/testing/procfs-diskstats
>> @@ -35,7 +35,9 @@ Description:
>>
>> Kernel 5.5+ appends two more fields for flush requests:
>>
>> - 19 - flush requests completed successfully
>> - 20 - time spent flushing
>> + == =====================================
>> + 19 flush requests completed successfully
>> + 20 time spent flushing
>> + == =====================================
>>
>> For more details refer to Documentation/admin-guide/iostats.rst
>> diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup
>> index 046978193368..a4e31c465194 100644
>> --- a/Documentation/ABI/testing/procfs-smaps_rollup
>> +++ b/Documentation/ABI/testing/procfs-smaps_rollup
>> @@ -14,28 +14,28 @@ Description:
>> For more details, see Documentation/filesystems/proc.rst
>> and the procfs man page.
>>
>> - Typical output looks like this:
>> + Typical output looks like this::
>>
>> - 00100000-ff709000 ---p 00000000 00:00 0 [rollup]
>> - Size: 1192 kB
>> - KernelPageSize: 4 kB
>> - MMUPageSize: 4 kB
>> - Rss: 884 kB
>> - Pss: 385 kB
>> - Pss_Anon: 301 kB
>> - Pss_File: 80 kB
>> - Pss_Shmem: 4 kB
>> - Shared_Clean: 696 kB
>> - Shared_Dirty: 0 kB
>> - Private_Clean: 120 kB
>> - Private_Dirty: 68 kB
>> - Referenced: 884 kB
>> - Anonymous: 68 kB
>> - LazyFree: 0 kB
>> - AnonHugePages: 0 kB
>> - ShmemPmdMapped: 0 kB
>> - Shared_Hugetlb: 0 kB
>> - Private_Hugetlb: 0 kB
>> - Swap: 0 kB
>> - SwapPss: 0 kB
>> - Locked: 385 kB
>> + 00100000-ff709000 ---p 00000000 00:00 0 [rollup]
>> + Size: 1192 kB
>> + KernelPageSize: 4 kB
>> + MMUPageSize: 4 kB
>> + Rss: 884 kB
>> + Pss: 385 kB
>> + Pss_Anon: 301 kB
>> + Pss_File: 80 kB
>> + Pss_Shmem: 4 kB
>> + Shared_Clean: 696 kB
>> + Shared_Dirty: 0 kB
>> + Private_Clean: 120 kB
>> + Private_Dirty: 68 kB
>> + Referenced: 884 kB
>> + Anonymous: 68 kB
>> + LazyFree: 0 kB
>> + AnonHugePages: 0 kB
>> + ShmemPmdMapped: 0 kB
>> + Shared_Hugetlb: 0 kB
>> + Private_Hugetlb: 0 kB
>> + Swap: 0 kB
>> + SwapPss: 0 kB
>> + Locked: 385 kB
>> diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore
>> index d45209abdb1b..5b02540781a2 100644
>> --- a/Documentation/ABI/testing/pstore
>> +++ b/Documentation/ABI/testing/pstore
>> @@ -9,25 +9,25 @@ Description: Generic interface to platform dependent persistent storage.
>> provide a generic interface to show records captured in
>> the dying moments. In the case of a panic the last part
>> of the console log is captured, but other interesting
>> - data can also be saved.
>> + data can also be saved::
>>
>> - # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
>> + # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
>>
>> - $ ls -l /sys/fs/pstore/
>> - total 0
>> - -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
>> + $ ls -l /sys/fs/pstore/
>> + total 0
>> + -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
>>
>> Different users of this interface will result in different
>> filename prefixes. Currently two are defined:
>>
>> - "dmesg" - saved console log
>> - "mce" - architecture dependent data from fatal h/w error
>> + - "dmesg" - saved console log
>> + - "mce" - architecture dependent data from fatal h/w error
>>
>> Once the information in a file has been read, removing
>> the file will signal to the underlying persistent storage
>> - device that it can reclaim the space for later re-use.
>> + device that it can reclaim the space for later re-use::
>>
>> - $ rm /sys/fs/pstore/dmesg-erst-1
>> + $ rm /sys/fs/pstore/dmesg-erst-1
>>
>> The expectation is that all files in /sys/fs/pstore/
>> will be saved elsewhere and erased from persistent store
>> @@ -44,4 +44,3 @@ Description: Generic interface to platform dependent persistent storage.
>> backends are available, the preferred backend may be
>> set by passing the pstore.backend= argument to the kernel at
>> boot time.
>> -
>> diff --git a/Documentation/ABI/testing/sysfs-block-rnbd b/Documentation/ABI/testing/sysfs-block-rnbd
>> index 8f070b47f361..14a6fe9422b3 100644
>> --- a/Documentation/ABI/testing/sysfs-block-rnbd
>> +++ b/Documentation/ABI/testing/sysfs-block-rnbd
>> @@ -9,9 +9,9 @@ Description: To unmap a volume, "normal" or "force" has to be written to:
>> is using the device. When "force" is used, the device is also unmapped
>> when device is in use. All I/Os that are in progress will fail.
>>
>> - Example:
>> + Example::
>>
>> - # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device
>> + # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device
>>
>> What: /sys/block/rnbd<N>/rnbd/state
>> Date: Feb 2020
>> diff --git a/Documentation/ABI/testing/sysfs-bus-acpi b/Documentation/ABI/testing/sysfs-bus-acpi
>> index c78603497b97..58abacf59b2a 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-acpi
>> +++ b/Documentation/ABI/testing/sysfs-bus-acpi
>> @@ -5,6 +5,7 @@ Description:
>> This attribute indicates the full path of ACPI namespace
>> object associated with the device object. For example,
>> \_SB_.PCI0.
>> +
>> This file is not present for device objects representing
>> fixed ACPI hardware features (like power and sleep
>> buttons).
>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10 b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
>> index b5f526081711..3e92cbd3fd83 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10
>> @@ -4,7 +4,10 @@ KernelVersion: 3.19
>> Contact: Mathieu Poirier <mathieu.poirier@...aro.org>
>> Description: (RW) Add/remove a sink from a trace path. There can be multiple
>> source for a single sink.
>> - ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
>> +
>> + ex::
>> +
>> + echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
>>
>> What: /sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr
>> Date: November 2014
>> diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css
>> index 966f8504bd7b..12a733fe357f 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-css
>> +++ b/Documentation/ABI/testing/sysfs-bus-css
>> @@ -20,6 +20,7 @@ Contact: Cornelia Huck <cornelia.huck@...ibm.com>
>> Description: Contains the ids of the channel paths used by this
>> subchannel, as reported by the channel subsystem
>> during subchannel recognition.
>> +
>> Note: This is an I/O-subchannel specific attribute.
>> Users: s390-tools, HAL
>>
>> @@ -31,6 +32,7 @@ Description: Contains the PIM/PAM/POM values, as reported by the
>> channel subsystem when last queried by the common I/O
>> layer (this implies that this attribute is not necessarily
>> in sync with the values current in the channel subsystem).
>> +
>> Note: This is an I/O-subchannel specific attribute.
>> Users: s390-tools, HAL
>>
>> @@ -53,6 +55,7 @@ Description: This file allows the driver for a device to be specified. When
>> opt-out of driver binding using a driver_override name such as
>> "none". Only a single driver may be specified in the override,
>> there is no support for parsing delimiters.
>> +
>> Note that unlike the mechanism of the same name for pci, this
>> file does not allow to override basic matching rules. I.e.,
>> the driver must still match the subchannel type of the device.
>> diff --git a/Documentation/ABI/testing/sysfs-bus-dfl b/Documentation/ABI/testing/sysfs-bus-dfl
>> index 23543be904f2..b0265ab17200 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-dfl
>> +++ b/Documentation/ABI/testing/sysfs-bus-dfl
>> @@ -4,6 +4,7 @@ KernelVersion: 5.10
>> Contact: Xu Yilun <yilun.xu@...el.com>
>> Description: Read-only. It returns type of DFL FIU of the device. Now DFL
>> supports 2 FIU types, 0 for FME, 1 for PORT.
>> +
>> Format: 0x%x
>>
>> What: /sys/bus/dfl/devices/dfl_dev.X/feature_id
>> @@ -12,4 +13,5 @@ KernelVersion: 5.10
>> Contact: Xu Yilun <yilun.xu@...el.com>
>> Description: Read-only. It returns feature identifier local to its DFL FIU
>> type.
>> +
>> Format: 0x%x
>> diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
>> index 2273627df190..de390a010af8 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
>> +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
>> @@ -7,7 +7,7 @@ Description: Read-only. Attribute group to describe the magic bits
>>
>> Each attribute under this group defines a bit range of the
>> perf_event_attr.config. All supported attributes are listed
>> - below.
>> + below::
>>
>> chip = "config:16-31"
>> core = "config:16-31"
>> @@ -16,9 +16,9 @@ Description: Read-only. Attribute group to describe the magic bits
>> offset = "config:32-63"
>> vcpu = "config:16-31"
>>
>> - For example,
>> + For example::
>>
>> - PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0"
>> + PM_PB_CYC = "domain=1,offset=0x80,chip=?,lpar=0x0"
>>
>> In this event, '?' after chip specifies that
>> this value will be provided by user while running this event.
>> diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
>> index 6a023b42486c..12e2bf92783f 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
>> +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
>> @@ -7,7 +7,7 @@ Description: Read-only. Attribute group to describe the magic bits
>>
>> Each attribute under this group defines a bit range of the
>> perf_event_attr.config. All supported attributes are listed
>> - below.
>> + below::
>>
>> counter_info_version = "config:16-23"
>> length = "config:24-31"
>> @@ -20,9 +20,9 @@ Description: Read-only. Attribute group to describe the magic bits
>> secondary_index = "config:0-15"
>> starting_index = "config:32-63"
>>
>> - For example,
>> + For example::
>>
>> - processor_core_utilization_instructions_completed = "request=0x94,
>> + processor_core_utilization_instructions_completed = "request=0x94,
>> phys_processor_idx=?,counter_info_version=0x8,
>> length=8,offset=0x18"
>>
>> @@ -36,6 +36,7 @@ Description:
>> '0' if the hypervisor is configured to forbid access to event
>> counters being accumulated by other guests and to physical
>> domain event counters.
>> +
>> '1' if that access is allowed.
>>
>> What: /sys/bus/event_source/devices/hv_gpci/interface/ga
>> diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe
>> index 657df13b100d..8fe787cc4ab7 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-fcoe
>> +++ b/Documentation/ABI/testing/sysfs-bus-fcoe
>> @@ -3,16 +3,19 @@ Date: August 2012
>> KernelVersion: TBD
>> Contact: Robert Love <robert.w.love@...el.com>, devel@...n-fcoe.org
>> Description: The FCoE bus. Attributes in this directory are control interfaces.
>> +
>> Attributes:
>>
>> - ctlr_create: 'FCoE Controller' instance creation interface. Writing an
>> + ctlr_create:
>> + 'FCoE Controller' instance creation interface. Writing an
>> <ifname> to this file will allocate and populate sysfs with a
>> fcoe_ctlr_device (ctlr_X). The user can then configure any
>> per-port settings and finally write to the fcoe_ctlr_device's
>> 'start' attribute to begin the kernel's discovery and login
>> process.
>>
>> - ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
>> + ctlr_destroy:
>> + 'FCoE Controller' instance removal interface. Writing a
>> fcoe_ctlr_device's sysfs name to this file will log the
>> fcoe_ctlr_device out of the fabric or otherwise connected
>> FCoE devices. It will also free all kernel memory allocated
>> @@ -32,11 +35,13 @@ Description: 'FCoE Controller' instances on the fcoe bus.
>>
>> Attributes:
>>
>> - fcf_dev_loss_tmo: Device loss timeout period (see below). Changing
>> + fcf_dev_loss_tmo:
>> + Device loss timeout period (see below). Changing
>> this value will change the dev_loss_tmo for all
>> FCFs discovered by this controller.
>>
>> - mode: Display or change the FCoE Controller's mode. Possible
>> + mode:
>> + Display or change the FCoE Controller's mode. Possible
>> modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
>> is started in 'Fabric' mode then FIP FCF discovery is
>> initiated and ultimately a fabric login is attempted.
>> @@ -44,23 +49,30 @@ Attributes:
>> FIP VN2VN discovery and login is performed. A FCoE
>> Controller only supports one mode at a time.
>>
>> - enabled: Whether an FCoE controller is enabled or disabled.
>> + enabled:
>> + Whether an FCoE controller is enabled or disabled.
>> 0 if disabled, 1 if enabled. Writing either 0 or 1
>> to this file will enable or disable the FCoE controller.
>>
>> - lesb/link_fail: Link Error Status Block (LESB) link failure count.
>> + lesb/link_fail:
>> + Link Error Status Block (LESB) link failure count.
>>
>> - lesb/vlink_fail: Link Error Status Block (LESB) virtual link
>> + lesb/vlink_fail:
>> + Link Error Status Block (LESB) virtual link
>> failure count.
>>
>> - lesb/miss_fka: Link Error Status Block (LESB) missed FCoE
>> + lesb/miss_fka:
>> + Link Error Status Block (LESB) missed FCoE
>> Initialization Protocol (FIP) Keep-Alives (FKA).
>>
>> - lesb/symb_err: Link Error Status Block (LESB) symbolic error count.
>> + lesb/symb_err:
>> + Link Error Status Block (LESB) symbolic error count.
>>
>> - lesb/err_block: Link Error Status Block (LESB) block error count.
>> + lesb/err_block:
>> + Link Error Status Block (LESB) block error count.
>>
>> - lesb/fcs_error: Link Error Status Block (LESB) Fibre Channel
>> + lesb/fcs_error:
>> + Link Error Status Block (LESB) Fibre Channel
>> Services error count.
>>
>> Notes: ctlr_X (global increment starting at 0)
>> @@ -75,31 +87,41 @@ Description: 'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
>> Fibre Channel frames into a FC fabric. It can also take
>> outbound FC frames and pack them in Ethernet packets to
>> be sent to their destination on the Ethernet segment.
>> +
>> Attributes:
>>
>> - fabric_name: Identifies the fabric that the FCF services.
>> + fabric_name:
>> + Identifies the fabric that the FCF services.
>>
>> - switch_name: Identifies the FCF.
>> + switch_name:
>> + Identifies the FCF.
>>
>> - priority: The switch's priority amongst other FCFs on the same
>> + priority:
>> + The switch's priority amongst other FCFs on the same
>> fabric.
>>
>> - selected: 1 indicates that the switch has been selected for use;
>> + selected:
>> + 1 indicates that the switch has been selected for use;
>> 0 indicates that the switch will not be used.
>>
>> - fc_map: The Fibre Channel MAP
>> + fc_map:
>> + The Fibre Channel MAP
>>
>> - vfid: The Virtual Fabric ID
>> + vfid:
>> + The Virtual Fabric ID
>>
>> - mac: The FCF's MAC address
>> + mac:
>> + The FCF's MAC address
>>
>> - fka_period: The FIP Keep-Alive period
>> + fka_period:
>> + The FIP Keep-Alive period
>>
>> fabric_state: The internal kernel state
>> - "Unknown" - Initialization value
>> - "Disconnected" - No link to the FCF/fabric
>> - "Connected" - Host is connected to the FCF
>> - "Deleted" - FCF is being removed from the system
>> +
>> + - "Unknown" - Initialization value
>> + - "Disconnected" - No link to the FCF/fabric
>> + - "Connected" - Host is connected to the FCF
>> + - "Deleted" - FCF is being removed from the system
>>
>> dev_loss_tmo: The device loss timeout period for this FCF.
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-fsl-mc b/Documentation/ABI/testing/sysfs-bus-fsl-mc
>> index 80256b8b4f26..bf3c6af6ad89 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-fsl-mc
>> +++ b/Documentation/ABI/testing/sysfs-bus-fsl-mc
>> @@ -6,8 +6,10 @@ Description:
>> the driver to attempt to bind to the device found at
>> this location. The format for the location is Object.Id
>> and is the same as found in /sys/bus/fsl-mc/devices/.
>> - For example:
>> - # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind
>> +
>> + For example::
>> +
>> + # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind
>>
>> What: /sys/bus/fsl-mc/drivers/.../unbind
>> Date: December 2016
>> @@ -17,5 +19,7 @@ Description:
>> driver to attempt to unbind from the device found at
>> this location. The format for the location is Object.Id
>> and is the same as found in /sys/bus/fsl-mc/devices/.
>> - For example:
>> - # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind
>> +
>> + For example::
>> +
>> + # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind
>> diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
>> index 9de269bb0ae5..42dfc9399d2d 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
>> +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
>> @@ -3,19 +3,25 @@ Date: February 2011
>> Contact: Minkyu Kang <mk7.kang@...sung.com>
>> Description:
>> show what device is attached
>> - NONE - no device
>> - USB - USB device is attached
>> - UART - UART is attached
>> - CHARGER - Charger is attaced
>> - JIG - JIG is attached
>> +
>> + ======= ======================
>> + NONE no device
>> + USB USB device is attached
>> + UART UART is attached
>> + CHARGER Charger is attaced
>> + JIG JIG is attached
>> + ======= ======================
>>
>> What: /sys/bus/i2c/devices/.../switch
>> Date: February 2011
>> Contact: Minkyu Kang <mk7.kang@...sung.com>
>> Description:
>> show or set the state of manual switch
>> - VAUDIO - switch to VAUDIO path
>> - UART - switch to UART path
>> - AUDIO - switch to AUDIO path
>> - DHOST - switch to DHOST path
>> - AUTO - switch automatically by device
>> +
>> + ======= ==============================
>> + VAUDIO switch to VAUDIO path
>> + UART switch to UART path
>> + AUDIO switch to AUDIO path
>> + DHOST switch to DHOST path
>> + AUTO switch automatically by device
>> + ======= ==============================
>> diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
>> index 2f332ec36f82..1f4a2662335b 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-i3c
>> +++ b/Documentation/ABI/testing/sysfs-bus-i3c
>> @@ -84,6 +84,7 @@ Description:
>> by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
>> See the I3C specification for more details about these HDR
>> modes.
>> +
>> This entry describes the HDRCAP of the master controller
>> driving the bus.
>>
>> @@ -135,6 +136,7 @@ Description:
>> Expose the HDR (High Data Rate) capabilities of a device.
>> Returns a list of supported HDR mode, each element is separated
>> by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
>> +
>> See the I3C specification for more details about these HDR
>> modes.
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
>> index e3df71987eff..df42bed09f25 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio
>> @@ -15,6 +15,7 @@ Description:
>> based on hardware generated events (e.g. data ready) or
>> provided by a separate driver for other hardware (e.g.
>> periodic timer, GPIO or high resolution timer).
>> +
>> Contains trigger type specific elements. These do not
>> generalize well and hence are not documented in this file.
>> X is the IIO index of the trigger.
>> @@ -666,6 +667,7 @@ Description:
>> <type>[Y][_name]_<raw|input>_thresh_falling_value may take
>> different values, but the device can only enable both thresholds
>> or neither.
>> +
>> Note the driver will assume the last p events requested are
>> to be enabled where p is how many it supports (which may vary
>> depending on the exact set requested. So if you want to be
>> @@ -720,6 +722,7 @@ Description:
>> <type>[Y][_name]_<raw|input>_roc_falling_value may take
>> different values, but the device can only enable both rate of
>> change thresholds or neither.
>> +
>> Note the driver will assume the last p events requested are
>> to be enabled where p is however many it supports (which may
>> vary depending on the exact set requested. So if you want to be
>> @@ -775,9 +778,11 @@ Description:
>> Specifies the value of threshold that the device is comparing
>> against for the events enabled by
>> <type>Y[_name]_thresh[_rising|falling]_en.
>> +
>> If separate attributes exist for the two directions, but
>> direction is not specified for this attribute, then a single
>> threshold value applies to both directions.
>> +
>> The raw or input element of the name indicates whether the
>> value is in raw device units or in processed units (as _raw
>> and _input do on sysfs direct channel read attributes).
>> @@ -860,6 +865,7 @@ Description:
>> If separate attributes exist for the two directions, but
>> direction is not specified for this attribute, then a single
>> hysteresis value applies to both directions.
>> +
>> For falling events the hysteresis is added to the _value attribute for
>> this event to get the upper threshold for when the event goes back to
>> normal, for rising events the hysteresis is subtracted from the _value
>> @@ -906,6 +912,7 @@ Description:
>> Specifies the value of rate of change threshold that the
>> device is comparing against for the events enabled by
>> <type>[Y][_name]_roc[_rising|falling]_en.
>> +
>> If separate attributes exist for the two directions,
>> but direction is not specified for this attribute,
>> then a single threshold value applies to both directions.
>> @@ -1305,6 +1312,7 @@ Description:
>> Proximity measurement indicating that some
>> object is near the sensor, usually by observing
>> reflectivity of infrared or ultrasound emitted.
>> +
>> Often these sensors are unit less and as such conversion
>> to SI units is not possible. Higher proximity measurements
>> indicate closer objects, and vice versa. Units after
>> @@ -1450,9 +1458,12 @@ Contact: linux-iio@...r.kernel.org
>> Description:
>> A single positive integer specifying the maximum number of scan
>> elements to wait for.
>> +
>> Poll will block until the watermark is reached.
>> +
>> Blocking read will wait until the minimum between the requested
>> read amount or the low water mark is available.
>> +
>> Non-blocking read will retrieve the available samples from the
>> buffer even if there are less samples then watermark level. This
>> allows the application to block on poll with a timeout and read
>> @@ -1481,11 +1492,13 @@ Description:
>> device settings allows it (e.g. if a trigger is set that samples
>> data differently that the hardware fifo does then hardware fifo
>> will not enabled).
>> +
>> If the hardware fifo is enabled and the level of the hardware
>> fifo reaches the hardware fifo watermark level the device will
>> flush its hardware fifo to the device buffer. Doing a non
>> blocking read on the device when no samples are present in the
>> device buffer will also force a flush.
>> +
>> When the hardware fifo is enabled there is no need to use a
>> trigger to use buffer mode since the watermark settings
>> guarantees that the hardware fifo is flushed to the device
>> @@ -1523,6 +1536,7 @@ Description:
>> A single positive integer specifying the minimum watermark level
>> for the hardware fifo of this device. If the device does not
>> have a hardware fifo this entry is not present.
>> +
>> If the user sets buffer/watermark to a value less than this one,
>> then the hardware watermark will remain unset.
>>
>> @@ -1533,6 +1547,7 @@ Description:
>> A single positive integer specifying the maximum watermark level
>> for the hardware fifo of this device. If the device does not
>> have a hardware fifo this entry is not present.
>> +
>> If the user sets buffer/watermark to a value greater than this
>> one, then the hardware watermark will be capped at this value.
>>
>> @@ -1544,6 +1559,7 @@ Description:
>> levels for the hardware fifo. This entry is optional and if it
>> is not present it means that all the values between
>> hwfifo_watermark_min and hwfifo_watermark_max are supported.
>> +
>> If the user sets buffer/watermark to a value greater than
>> hwfifo_watermak_min but not equal to any of the values in this
>> list, the driver will chose an appropriate value for the
>> @@ -1605,7 +1621,8 @@ KernelVersion: 4.1.0
>> Contact: linux-iio@...r.kernel.org
>> Description:
>> '1' (enable) or '0' (disable) specifying the enable
>> - of heater function. Same reading values apply
>> + of heater function. Same reading values apply.
>> +
>> This ABI is especially applicable for humidity sensors
>> to heatup the device and get rid of any condensation
>> in some humidity environment
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 b/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
>> index f30b4c424fb6..4b01150af397 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
>> @@ -19,9 +19,11 @@ Description:
>> is separately set for "GND-Open" and "Supply-Open" modes.
>> Channels 0..31 have common low threshold values, but could have different
>> sensing_modes.
>> +
>> The low voltage threshold range is between 2..21V.
>> Hysteresis between low and high thresholds can not be lower then 2 and
>> can not be odd.
>> +
>> If falling threshold results hysteresis to odd value then rising
>> threshold is automatically subtracted by one.
>>
>> @@ -34,10 +36,13 @@ Description:
>> this value then the threshold rising event is pushed.
>> Depending on in_voltageY_sensing_mode the high voltage threshold
>> is separately set for "GND-Open" and "Supply-Open" modes.
>> +
>> Channels 0..31 have common high threshold values, but could have different
>> sensing_modes.
>> +
>> The high voltage threshold range is between 3..22V.
>> Hysteresis between low and high thresholds can not be lower then 2 and
>> can not be odd.
>> +
>> If rising threshold results hysteresis to odd value then falling
>> threshold is automatically appended by one.
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
>> index efe4c85e3c8b..1975c7a1af34 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
>> @@ -5,10 +5,13 @@ Description:
>> The STM32 ADC can be configured to use external trigger sources
>> (e.g. timers, pwm or exti gpio). Then, it can be tuned to start
>> conversions on external trigger by either:
>> +
>> - "rising-edge"
>> - "falling-edge"
>> - "both-edges".
>> +
>> Reading returns current trigger polarity.
>> +
>> Writing value before enabling conversions sets trigger polarity.
>>
>> What: /sys/bus/iio/devices/triggerX/trigger_polarity_available
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
>> index a133fd8d081a..40df5c9fef99 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
>> @@ -15,8 +15,11 @@ Description:
>> first object echoed in meters. Default value is 6.020.
>> This setting limits the time the driver is waiting for a
>> echo.
>> +
>> Showing the range of available values is represented as the
>> minimum value, the step and the maximum value, all enclosed
>> in square brackets.
>> - Example:
>> - [0.043 0.043 11.008]
>> +
>> + Example::
>> +
>> + [0.043 0.043 11.008]
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
>> index a91aeabe7b24..d065cda7dd96 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
>> @@ -8,7 +8,9 @@ KernelVersion: 3.4.0
>> Contact: linux-iio@...r.kernel.org
>> Description:
>> Reading returns either '1' or '0'.
>> +
>> '1' means that the clock in question is present.
>> +
>> '0' means that the clock is missing.
>>
>> What: /sys/bus/iio/devices/iio:deviceX/pllY_locked
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
>> index 302de64cb424..544548ee794c 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
>> @@ -27,12 +27,12 @@ What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name
>> KernelVersion:
>> Contact: linux-iio@...r.kernel.org
>> Description:
>> - Reading returns the datasheet name for channel Y:
>> + Reading returns the datasheet name for channel Y::
>>
>> - out_altvoltage0_name: RF8x
>> - out_altvoltage1_name: RFAUX8x
>> - out_altvoltage2_name: RF16x
>> - out_altvoltage3_name: RF32x
>> + out_altvoltage0_name: RF8x
>> + out_altvoltage1_name: RFAUX8x
>> + out_altvoltage2_name: RF16x
>> + out_altvoltage3_name: RF32x
>>
>> What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
>> KernelVersion:
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
>> index 6adba9058b22..66b621f10223 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
>> @@ -6,10 +6,14 @@ Description:
>> Get measured values from the ADC for these stages. Y is the
>> specific stage number corresponding to datasheet stage names
>> as follows:
>> - 1 -> LED2
>> - 2 -> ALED2/LED3
>> - 3 -> LED1
>> - 4 -> ALED1/LED4
>> +
>> + == ==========
>> + 1 LED2
>> + 2 ALED2/LED3
>> + 3 LED1
>> + 4 ALED1/LED4
>> + == ==========
>> +
>> Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
>> respectively which simply helper channels containing the
>> calculated difference in the value of stage 1 - 2 and 3 - 4.
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 b/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018
>> index f0ce0a0476ea..220206a20d98 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018
>> @@ -15,5 +15,7 @@ Description:
>> Scheme 0 has wider dynamic range, Scheme 1 proximity detection
>> is less affected by the ambient IR noise variation.
>>
>> - 0 Sensing IR from LED and ambient
>> - 1 Sensing IR from LED with ambient IR rejection
>> + == =============================================
>> + 0 Sensing IR from LED and ambient
>> + 1 Sensing IR from LED with ambient IR rejection
>> + == =============================================
>> diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
>> index 22d0843849a8..b7b2278fe042 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
>> +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
>> @@ -10,10 +10,13 @@ Date: June 2015
>> KernelVersion: 4.3
>> Contact: Alexander Shishkin <alexander.shishkin@...ux.intel.com>
>> Description: (RO) Output port type:
>> - 0: not present,
>> - 1: MSU (Memory Storage Unit)
>> - 2: CTP (Common Trace Port)
>> - 4: PTI (MIPI PTI).
>> +
>> + == =========================
>> + 0 not present,
>> + 1 MSU (Memory Storage Unit)
>> + 2 CTP (Common Trace Port)
>> + 4 PTI (MIPI PTI).
>> + == =========================
>>
>> What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop
>> Date: June 2015
>> diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
>> index c1a67275c43f..8316c33862a0 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem
>> +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem
>> @@ -11,19 +11,26 @@ Description:
>> at 'Documentation/powerpc/papr_hcalls.rst' . Below are
>> the flags reported in this sysfs file:
>>
>> - * "not_armed" : Indicates that NVDIMM contents will not
>> + * "not_armed"
>> + Indicates that NVDIMM contents will not
>> survive a power cycle.
>> - * "flush_fail" : Indicates that NVDIMM contents
>> + * "flush_fail"
>> + Indicates that NVDIMM contents
>> couldn't be flushed during last
>> shut-down event.
>> - * "restore_fail": Indicates that NVDIMM contents
>> + * "restore_fail"
>> + Indicates that NVDIMM contents
>> couldn't be restored during NVDIMM
>> initialization.
>> - * "encrypted" : NVDIMM contents are encrypted.
>> - * "smart_notify": There is health event for the NVDIMM.
>> - * "scrubbed" : Indicating that contents of the
>> + * "encrypted"
>> + NVDIMM contents are encrypted.
>> + * "smart_notify"
>> + There is health event for the NVDIMM.
>> + * "scrubbed"
>> + Indicating that contents of the
>> NVDIMM have been scrubbed.
>> - * "locked" : Indicating that NVDIMM contents cant
>> + * "locked"
>> + Indicating that NVDIMM contents cant
>> be modified until next power cycle.
>>
>> What: /sys/bus/nd/devices/nmemX/papr/perf_stats
>> @@ -51,4 +58,4 @@ Description:
>> * "MedWDur " : Media Write Duration
>> * "CchRHCnt" : Cache Read Hit Count
>> * "CchWHCnt" : Cache Write Hit Count
>> - * "FastWCnt" : Fast Write Count
>> \ No newline at end of file
>> + * "FastWCnt" : Fast Write Count
>> diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
>> index 450296cc7948..77ad9ec3c801 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-pci
>> +++ b/Documentation/ABI/testing/sysfs-bus-pci
>> @@ -7,8 +7,10 @@ Description:
>> this location. This is useful for overriding default
>> bindings. The format for the location is: DDDD:BB:DD.F.
>> That is Domain:Bus:Device.Function and is the same as
>> - found in /sys/bus/pci/devices/. For example:
>> - # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
>> + found in /sys/bus/pci/devices/. For example::
>> +
>> + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
>> +
>> (Note: kernels before 2.6.28 may require echo -n).
>>
>> What: /sys/bus/pci/drivers/.../unbind
>> @@ -20,8 +22,10 @@ Description:
>> this location. This may be useful when overriding default
>> bindings. The format for the location is: DDDD:BB:DD.F.
>> That is Domain:Bus:Device.Function and is the same as
>> - found in /sys/bus/pci/devices/. For example:
>> - # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
>> + found in /sys/bus/pci/devices/. For example::
>> +
>> + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
>> +
>> (Note: kernels before 2.6.28 may require echo -n).
>>
>> What: /sys/bus/pci/drivers/.../new_id
>> @@ -38,8 +42,9 @@ Description:
>> Class, Class Mask, and Private Driver Data. The Vendor ID
>> and Device ID fields are required, the rest are optional.
>> Upon successfully adding an ID, the driver will probe
>> - for the device and attempt to bind to it. For example:
>> - # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
>> + for the device and attempt to bind to it. For example::
>> +
>> + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
>>
>> What: /sys/bus/pci/drivers/.../remove_id
>> Date: February 2009
>> @@ -54,8 +59,9 @@ Description:
>> required, the rest are optional. After successfully
>> removing an ID, the driver will no longer support the
>> device. This is useful to ensure auto probing won't
>> - match the driver to the device. For example:
>> - # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
>> + match the driver to the device. For example::
>> +
>> + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
>>
>> What: /sys/bus/pci/rescan
>> Date: January 2009
>> diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
>> index 8a200f4eefbd..f85db86d63e8 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
>> +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
>> @@ -4,6 +4,7 @@ Contact: Cezary Rojewski <cezary.rojewski@...el.com>
>> Description:
>> Version of AudioDSP firmware ASoC catpt driver is
>> communicating with.
>> +
>> Format: %d.%d.%d.%d, type:major:minor:build.
>>
>> What: /sys/devices/pci0000:00/<dev>/fw_info
>> diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
>> index 60c60fa624b2..c90d97a80855 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
>> +++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
>> @@ -21,11 +21,11 @@ Description:
>> number returns the port to normal operation.
>>
>> For example: To force the high-speed device attached to
>> - port 4 on bus 2 to run at full speed:
>> + port 4 on bus 2 to run at full speed::
>>
>> echo 4 >/sys/bus/usb/devices/usb2/../companion
>>
>> - To return the port to high-speed operation:
>> + To return the port to high-speed operation::
>>
>> echo -4 >/sys/bus/usb/devices/usb2/../companion
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
>> index cc30bee8b5f4..417a2fe21be1 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-rbd
>> +++ b/Documentation/ABI/testing/sysfs-bus-rbd
>> @@ -7,6 +7,8 @@ Description:
>>
>> Usage: <mon ip addr> <options> <pool name> <rbd image name> [<snap name>]
>>
>> + Example::
>> +
>> $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
>>
>> The snapshot name can be "-" or omitted to map the image
>> @@ -23,6 +25,8 @@ Description:
>>
>> Usage: <dev-id> [force]
>>
>> + Example::
>> +
>> $ echo 2 > /sys/bus/rbd/remove
>>
>> Optional "force" argument which when passed will wait for
>> @@ -80,26 +84,29 @@ Date: Oct, 2010
>> KernelVersion: v2.6.37
>> Contact: Sage Weil <sage@...dream.net>
>> Description:
>> - size: (RO) The size (in bytes) of the mapped block
>> +
>> + ============== ================================================
>> + size (RO) The size (in bytes) of the mapped block
>> device.
>>
>> - major: (RO) The block device major number.
>> + major (RO) The block device major number.
>>
>> - client_id: (RO) The ceph unique client id that was assigned
>> + client_id (RO) The ceph unique client id that was assigned
>> for this specific session.
>>
>> - pool: (RO) The name of the storage pool where this rbd
>> + pool (RO) The name of the storage pool where this rbd
>> image resides. An rbd image name is unique
>> within its pool.
>>
>> - name: (RO) The name of the rbd image.
>> + name (RO) The name of the rbd image.
>>
>> - refresh: (WO) Writing to this file will reread the image
>> + refresh (WO) Writing to this file will reread the image
>> header data and set all relevant data structures
>> accordingly.
>>
>> - current_snap: (RO) The current snapshot for which the device
>> + current_snap (RO) The current snapshot for which the device
>> is mapped.
>> + ============== ================================================
>>
>>
>> What: /sys/bus/rbd/devices/<dev-id>/pool_id
>> @@ -117,11 +124,13 @@ Date: Oct, 2012
>> KernelVersion: v3.7
>> Contact: Sage Weil <sage@...dream.net>
>> Description:
>> - image_id: (RO) The unique id for the rbd image. (For rbd
>> + ========= ===============================================
>> + image_id (RO) The unique id for the rbd image. (For rbd
>> image format 1 this is empty.)
>>
>> - features: (RO) A hexadecimal encoding of the feature bits
>> + features (RO) A hexadecimal encoding of the feature bits
>> for this image.
>> + ========= ===============================================
>>
>>
>> What: /sys/bus/rbd/devices/<dev-id>/parent
>> @@ -149,14 +158,16 @@ Date: Aug, 2016
>> KernelVersion: v4.9
>> Contact: Sage Weil <sage@...dream.net>
>> Description:
>> - snap_id: (RO) The current snapshot's id.
>> + ============ ================================================
>> + snap_id (RO) The current snapshot's id.
>>
>> - config_info: (RO) The string written into
>> + config_info (RO) The string written into
>> /sys/bus/rbd/add{,_single_major}.
>>
>> - cluster_fsid: (RO) The ceph cluster UUID.
>> + cluster_fsid (RO) The ceph cluster UUID.
>>
>> - client_addr: (RO) The ceph unique client
>> + client_addr (RO) The ceph unique client
>> entity_addr_t (address + nonce). The format is
>> <address>:<port>/<nonce>: '1.2.3.4:1234/5678' or
>> '[1:2:3:4:5:6:7:8]:1234/5678'.
>> + ============ ================================================
>> diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox
>> index c2a403f20b90..50e80238f30d 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-siox
>> +++ b/Documentation/ABI/testing/sysfs-bus-siox
>> @@ -8,6 +8,7 @@ Description:
>> When the file contains a "1" the bus is operated and periodically
>> does a push-pull cycle to write and read data from the
>> connected devices.
>> +
>> When writing a "0" or "1" the bus moves to the described state.
>>
>> What: /sys/bus/siox/devices/siox-X/device_add
>> @@ -21,8 +22,10 @@ Description:
>> to add a new device dynamically. <type> is the name that is used to match
>> to a driver (similar to the platform bus). <inbytes> and <outbytes> define
>> the length of the input and output shift register in bytes respectively.
>> +
>> <statustype> defines the 4 bit device type that is check to identify connection
>> problems.
>> +
>> The new device is added to the end of the existing chain.
>>
>> What: /sys/bus/siox/devices/siox-X/device_remove
>> diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
>> index 171127294674..0b4ab9e4b8f4 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
>> +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
>> @@ -193,10 +193,11 @@ Description: When new NVM image is written to the non-active NVM
>> verification fails an error code is returned instead.
>>
>> This file will accept writing values "1" or "2"
>> +
>> - Writing "1" will flush the image to the storage
>> - area and authenticate the image in one action.
>> + area and authenticate the image in one action.
>> - Writing "2" will run some basic validation on the image
>> - and flush it to the storage area.
>> + and flush it to the storage area.
>>
>> When read holds status of the last authentication
>> operation if an error occurred during the process. This
>> @@ -213,9 +214,11 @@ Description: This contains name of the property directory the XDomain
>> question. Following directories are already reserved by
>> the Apple XDomain specification:
>>
>> - network: IP/ethernet over Thunderbolt
>> - targetdm: Target disk mode protocol over Thunderbolt
>> - extdisp: External display mode protocol over Thunderbolt
>> + ======== ===============================================
>> + network IP/ethernet over Thunderbolt
>> + targetdm Target disk mode protocol over Thunderbolt
>> + extdisp External display mode protocol over Thunderbolt
>> + ======== ===============================================
>>
>> What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias
>> Date: Jan 2018
>> @@ -293,7 +296,8 @@ Description: For supported devices, automatically authenticate the new Thunderbo
>> image when the device is disconnected from the host system.
>>
>> This file will accept writing values "1" or "2"
>> +
>> - Writing "1" will flush the image to the storage
>> - area and prepare the device for authentication on disconnect.
>> + area and prepare the device for authentication on disconnect.
>> - Writing "2" will run some basic validation on the image
>> - and flush it to the storage area.
>> + and flush it to the storage area.
>> diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
>> index e449b8374f6a..bf2c1968525f 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-usb
>> +++ b/Documentation/ABI/testing/sysfs-bus-usb
>> @@ -9,6 +9,7 @@ Description:
>> by writing INTERFACE to /sys/bus/usb/drivers_probe
>> This allows to avoid side-effects with drivers
>> that need multiple interfaces.
>> +
>> A deauthorized interface cannot be probed or claimed.
>>
>> What: /sys/bus/usb/devices/usbX/interface_authorized_default
>> @@ -216,6 +217,7 @@ Description:
>> - Bit 0 of this field selects the "old" enumeration scheme,
>> as it is considerably faster (it only causes one USB reset
>> instead of 2).
>> +
>> The old enumeration scheme can also be selected globally
>> using /sys/module/usbcore/parameters/old_scheme_first, but
>> it is often not desirable as the new scheme was introduced to
>> diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
>> index c0e0a9ae7b3d..8251e78abc49 100644
>> --- a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
>> +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
>> @@ -6,8 +6,10 @@ Description:
>> Get the ALS output channel used as input in
>> ALS-current-control mode (0, 1), where:
>>
>> - 0 - out_current0 (backlight 0)
>> - 1 - out_current1 (backlight 1)
>> + == ==========================
>> + 0 out_current0 (backlight 0)
>> + 1 out_current1 (backlight 1)
>> + == ==========================
>>
>> What: /sys/class/backlight/<backlight>/als_en
>> Date: May 2012
>> @@ -30,8 +32,10 @@ Contact: Johan Hovold <jhovold@...il.com>
>> Description:
>> Set the brightness-mapping mode (0, 1), where:
>>
>> - 0 - exponential mode
>> - 1 - linear mode
>> + == ================
>> + 0 exponential mode
>> + 1 linear mode
>> + == ================
>>
>> What: /sys/class/backlight/<backlight>/pwm
>> Date: April 2012
>> @@ -40,9 +44,11 @@ Contact: Johan Hovold <jhovold@...il.com>
>> Description:
>> Set the PWM-input control mask (5 bits), where:
>>
>> - bit 5 - PWM-input enabled in Zone 4
>> - bit 4 - PWM-input enabled in Zone 3
>> - bit 3 - PWM-input enabled in Zone 2
>> - bit 2 - PWM-input enabled in Zone 1
>> - bit 1 - PWM-input enabled in Zone 0
>> - bit 0 - PWM-input enabled
>> + ===== ===========================
>> + bit 5 PWM-input enabled in Zone 4
>> + bit 4 PWM-input enabled in Zone 3
>> + bit 3 PWM-input enabled in Zone 2
>> + bit 2 PWM-input enabled in Zone 1
>> + bit 1 PWM-input enabled in Zone 0
>> + bit 0 PWM-input enabled
>> + ===== ===========================
>> diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
>> index d773d5697cf5..5402bd74ba43 100644
>> --- a/Documentation/ABI/testing/sysfs-class-bdi
>> +++ b/Documentation/ABI/testing/sysfs-class-bdi
>> @@ -24,7 +24,6 @@ default
>> filesystems which do not provide their own BDI.
>>
>> Files under /sys/class/bdi/<bdi>/
>> ----------------------------------
>>
>> read_ahead_kb (read-write)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-class-chromeos b/Documentation/ABI/testing/sysfs-class-chromeos
>> index 5819699d66ec..74ece942722e 100644
>> --- a/Documentation/ABI/testing/sysfs-class-chromeos
>> +++ b/Documentation/ABI/testing/sysfs-class-chromeos
>> @@ -17,13 +17,14 @@ Date: August 2015
>> KernelVersion: 4.2
>> Description:
>> Tell the EC to reboot in various ways. Options are:
>> - "cancel": Cancel a pending reboot.
>> - "ro": Jump to RO without rebooting.
>> - "rw": Jump to RW without rebooting.
>> - "cold": Cold reboot.
>> - "disable-jump": Disable jump until next reboot.
>> - "hibernate": Hibernate the EC.
>> - "at-shutdown": Reboot after an AP shutdown.
>> +
>> + - "cancel": Cancel a pending reboot.
>> + - "ro": Jump to RO without rebooting.
>> + - "rw": Jump to RW without rebooting.
>> + - "cold": Cold reboot.
>> + - "disable-jump": Disable jump until next reboot.
>> + - "hibernate": Hibernate the EC.
>> + - "at-shutdown": Reboot after an AP shutdown.
>>
>> What: /sys/class/chromeos/<ec-device-name>/version
>> Date: August 2015
>> diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
>> index a6f51a104c44..818f55970efb 100644
>> --- a/Documentation/ABI/testing/sysfs-class-cxl
>> +++ b/Documentation/ABI/testing/sysfs-class-cxl
>> @@ -217,6 +217,7 @@ Description: read/write
>> card. A power cycle is required to load the image.
>> "none" could be useful for debugging because the trace arrays
>> are preserved.
>> +
>> "user" and "factory" means PERST will cause either the user or
>> user or factory image to be loaded.
>> Default is to reload on PERST whichever image the card has
>> @@ -240,8 +241,11 @@ Contact: linuxppc-dev@...ts.ozlabs.org
>> Description: read/write
>> Trust that when an image is reloaded via PERST, it will not
>> have changed.
>> - 0 = don't trust, the image may be different (default)
>> - 1 = trust that the image will not change.
>> +
>> + == =================================================
>> + 0 don't trust, the image may be different (default)
>> + 1 trust that the image will not change.
>> + == =================================================
>> Users: https://github.com/ibm-capi/libcxl
>>
>> What: /sys/class/cxl/<card>/psl_timebase_synced
>> diff --git a/Documentation/ABI/testing/sysfs-class-devlink b/Documentation/ABI/testing/sysfs-class-devlink
>> index 64791b65c9a3..b662f747c83e 100644
>> --- a/Documentation/ABI/testing/sysfs-class-devlink
>> +++ b/Documentation/ABI/testing/sysfs-class-devlink
>> @@ -18,9 +18,9 @@ Description:
>>
>> This will be one of the following strings:
>>
>> - 'consumer unbind'
>> - 'supplier unbind'
>> - 'never'
>> + - 'consumer unbind'
>> + - 'supplier unbind'
>> + - 'never'
>>
>> 'consumer unbind' means the device link will be removed when
>> the consumer's driver is unbound from the consumer device.
>> @@ -49,8 +49,10 @@ Description:
>>
>> This will be one of the following strings:
>>
>> - '0' - Does not affect runtime power management
>> - '1' - Affects runtime power management
>> + === ========================================
>> + '0' Does not affect runtime power management
>> + '1' Affects runtime power management
>> + === ========================================
>>
>> What: /sys/class/devlink/.../status
>> Date: May 2020
>> @@ -68,13 +70,13 @@ Description:
>>
>> This will be one of the following strings:
>>
>> - 'not tracked'
>> - 'dormant'
>> - 'available'
>> - 'consumer probing'
>> - 'active'
>> - 'supplier unbinding'
>> - 'unknown'
>> + - 'not tracked'
>> + - 'dormant'
>> + - 'available'
>> + - 'consumer probing'
>> + - 'active'
>> + - 'supplier unbinding'
>> + - 'unknown'
>>
>> 'not tracked' means this device link does not track the status
>> and has no impact on the binding, unbinding and syncing the
>> @@ -114,8 +116,10 @@ Description:
>>
>> This will be one of the following strings:
>>
>> + === ================================
>> '0'
>> - '1' - Affects runtime power management
>> + '1' Affects runtime power management
>> + === ================================
>>
>> '0' means the device link can affect other device behaviors
>> like binding/unbinding, suspend/resume, runtime power
>> diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon
>> index 57a726232912..fde0fecd5de9 100644
>> --- a/Documentation/ABI/testing/sysfs-class-extcon
>> +++ b/Documentation/ABI/testing/sysfs-class-extcon
>> @@ -39,19 +39,22 @@ Description:
>> callback.
>>
>> If the default callback for showing function is used, the
>> - format is like this:
>> - # cat state
>> - USB_OTG=1
>> - HDMI=0
>> - TA=1
>> - EAR_JACK=0
>> - #
>> + format is like this::
>> +
>> + # cat state
>> + USB_OTG=1
>> + HDMI=0
>> + TA=1
>> + EAR_JACK=0
>> + #
>> +
>> In this example, the extcon device has USB_OTG and TA
>> cables attached and HDMI and EAR_JACK cables detached.
>>
>> In order to update the state of an extcon device, enter a hex
>> - state number starting with 0x:
>> - # echo 0xHEX > state
>> + state number starting with 0x::
>> +
>> + # echo 0xHEX > state
>>
>> This updates the whole state of the extcon device.
>> Inputs of all the methods are required to meet the
>> @@ -84,12 +87,13 @@ Contact: MyungJoo Ham <myungjoo.ham@...sung.com>
>> Description:
>> Shows the relations of mutually exclusiveness. For example,
>> if the mutually_exclusive array of extcon device is
>> - {0x3, 0x5, 0xC, 0x0}, then the output is:
>> - # ls mutually_exclusive/
>> - 0x3
>> - 0x5
>> - 0xc
>> - #
>> + {0x3, 0x5, 0xC, 0x0}, then the output is::
>> +
>> + # ls mutually_exclusive/
>> + 0x3
>> + 0x5
>> + 0xc
>> + #
>>
>> Note that mutually_exclusive is a sub-directory of the extcon
>> device and the file names under the mutually_exclusive
>> diff --git a/Documentation/ABI/testing/sysfs-class-fpga-manager b/Documentation/ABI/testing/sysfs-class-fpga-manager
>> index 5284fa33d4c5..d78689c357a5 100644
>> --- a/Documentation/ABI/testing/sysfs-class-fpga-manager
>> +++ b/Documentation/ABI/testing/sysfs-class-fpga-manager
>> @@ -28,8 +28,7 @@ Description: Read fpga manager state as a string.
>> * firmware request = firmware class request in progress
>> * firmware request error = firmware request failed
>> * write init = preparing FPGA for programming
>> - * write init error = Error while preparing FPGA for
>> - programming
>> + * write init error = Error while preparing FPGA for programming
>> * write = FPGA ready to receive image data
>> * write error = Error while programming
>> * write complete = Doing post programming steps
>> @@ -47,7 +46,7 @@ Description: Read fpga manager status as a string.
>> programming errors to userspace. This is a list of strings for
>> the supported status.
>>
>> - * reconfig operation error - invalid operations detected by
>> + * reconfig operation error - invalid operations detected by
>> reconfiguration hardware.
>> e.g. start reconfiguration
>> with errors not cleared
>> diff --git a/Documentation/ABI/testing/sysfs-class-gnss b/Documentation/ABI/testing/sysfs-class-gnss
>> index 2467b6900eae..c8553d972edd 100644
>> --- a/Documentation/ABI/testing/sysfs-class-gnss
>> +++ b/Documentation/ABI/testing/sysfs-class-gnss
>> @@ -6,9 +6,11 @@ Description:
>> The GNSS receiver type. The currently identified types reflect
>> the protocol(s) supported by the receiver:
>>
>> + ====== ===========
>> "NMEA" NMEA 0183
>> "SiRF" SiRF Binary
>> "UBX" UBX
>> + ====== ===========
>>
>> Note that also non-"NMEA" type receivers typically support a
>> subset of NMEA 0183 with vendor extensions (e.g. to allow
>> diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
>> index 65e040978f73..0ed5c2629c6f 100644
>> --- a/Documentation/ABI/testing/sysfs-class-led
>> +++ b/Documentation/ABI/testing/sysfs-class-led
>> @@ -47,6 +47,7 @@ Contact: Richard Purdie <rpurdie@...ys.net>
>> Description:
>> Set the trigger for this LED. A trigger is a kernel based source
>> of LED events.
>> +
>> You can change triggers in a similar manner to the way an IO
>> scheduler is chosen. Trigger specific parameters can appear in
>> /sys/class/leds/<led> once a given trigger is selected. For
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000 b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
>> index 69befe947d7e..da546e86deb5 100644
>> --- a/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
>> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-el15203000
>> @@ -27,23 +27,23 @@ Description:
>>
>> ^
>> |
>> - 0 On -|----+ +----+ +---
>> + 0 On -|----+ +----+ +---
>> | | | | |
>> Off-| +-------------------+ +-------------------+
>> |
>> - 1 On -| +----+ +----+
>> + 1 On -| +----+ +----+
>> | | | | |
>> Off |----+ +-------------------+ +------------------
>> |
>> - 2 On -| +----+ +----+
>> + 2 On -| +----+ +----+
>> | | | | |
>> Off-|---------+ +-------------------+ +-------------
>> |
>> - 3 On -| +----+ +----+
>> + 3 On -| +----+ +----+
>> | | | | |
>> Off-|--------------+ +-------------------+ +--------
>> |
>> - 4 On -| +----+ +----+
>> + 4 On -| +----+ +----+
>> | | | | |
>> Off-|-------------------+ +-------------------+ +---
>> |
>> @@ -55,23 +55,23 @@ Description:
>>
>> ^
>> |
>> - 0 On -| +-------------------+ +-------------------+
>> + 0 On -| +-------------------+ +-------------------+
>> | | | | |
>> Off-|----+ +----+ +---
>> |
>> - 1 On -|----+ +-------------------+ +------------------
>> + 1 On -|----+ +-------------------+ +------------------
>> | | | | |
>> Off | +----+ +----+
>> |
>> - 2 On -|---------+ +-------------------+ +-------------
>> + 2 On -|---------+ +-------------------+ +-------------
>> | | | | |
>> Off-| +----+ +----+
>> |
>> - 3 On -|--------------+ +-------------------+ +--------
>> + 3 On -|--------------+ +-------------------+ +--------
>> | | | | |
>> Off-| +----+ +----+
>> |
>> - 4 On -|-------------------+ +-------------------+ +---
>> + 4 On -|-------------------+ +-------------------+ +---
>> | | | | |
>> Off-| +----+ +----+
>> |
>> @@ -83,23 +83,23 @@ Description:
>>
>> ^
>> |
>> - 0 On -|----+ +--------
>> + 0 On -|----+ +--------
>> | | |
>> Off-| +---------------------------------------+
>> |
>> - 1 On -| +----+ +----+
>> + 1 On -| +----+ +----+
>> | | | | |
>> Off |----+ +-----------------------------+ +--------
>> |
>> - 2 On -| +----+ +----+
>> + 2 On -| +----+ +----+
>> | | | | |
>> Off-|---------+ +-------------------+ +-------------
>> |
>> - 3 On -| +----+ +----+
>> + 3 On -| +----+ +----+
>> | | | | |
>> Off-|--------------+ +---------+ +------------------
>> |
>> - 4 On -| +---------+
>> + 4 On -| +---------+
>> | | |
>> Off-|-------------------+ +-----------------------
>> |
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
>> index e4c89b261546..e38a835d0a85 100644
>> --- a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
>> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
>> @@ -6,8 +6,10 @@ Description:
>> Set the ALS output channel to use as input in
>> ALS-current-control mode (1, 2), where:
>>
>> - 1 - out_current1
>> - 2 - out_current2
>> + == ============
>> + 1 out_current1
>> + 2 out_current2
>> + == ============
>>
>> What: /sys/class/leds/<led>/als_en
>> Date: May 2012
>> @@ -24,14 +26,16 @@ Contact: Johan Hovold <jhovold@...il.com>
>> Description:
>> Set the pattern generator fall and rise times (0..7), where:
>>
>> - 0 - 2048 us
>> - 1 - 262 ms
>> - 2 - 524 ms
>> - 3 - 1.049 s
>> - 4 - 2.097 s
>> - 5 - 4.194 s
>> - 6 - 8.389 s
>> - 7 - 16.78 s
>> + == =======
>> + 0 2048 us
>> + 1 262 ms
>> + 2 524 ms
>> + 3 1.049 s
>> + 4 2.097 s
>> + 5 4.194 s
>> + 6 8.389 s
>> + 7 16.78 s
>> + == =======
>>
>> What: /sys/class/leds/<led>/id
>> Date: April 2012
>> @@ -47,8 +51,10 @@ Contact: Johan Hovold <jhovold@...il.com>
>> Description:
>> Set the brightness-mapping mode (0, 1), where:
>>
>> - 0 - exponential mode
>> - 1 - linear mode
>> + == ================
>> + 0 exponential mode
>> + 1 linear mode
>> + == ================
>>
>> What: /sys/class/leds/<led>/pwm
>> Date: April 2012
>> @@ -57,9 +63,11 @@ Contact: Johan Hovold <jhovold@...il.com>
>> Description:
>> Set the PWM-input control mask (5 bits), where:
>>
>> - bit 5 - PWM-input enabled in Zone 4
>> - bit 4 - PWM-input enabled in Zone 3
>> - bit 3 - PWM-input enabled in Zone 2
>> - bit 2 - PWM-input enabled in Zone 1
>> - bit 1 - PWM-input enabled in Zone 0
>> - bit 0 - PWM-input enabled
>> + ===== ===========================
>> + bit 5 PWM-input enabled in Zone 4
>> + bit 4 PWM-input enabled in Zone 3
>> + bit 3 PWM-input enabled in Zone 2
>> + bit 2 PWM-input enabled in Zone 1
>> + bit 1 PWM-input enabled in Zone 0
>> + bit 0 PWM-input enabled
>> + ===== ===========================
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-flash b/Documentation/ABI/testing/sysfs-class-led-flash
>> index 220a0270b47b..11e5677c3672 100644
>> --- a/Documentation/ABI/testing/sysfs-class-led-flash
>> +++ b/Documentation/ABI/testing/sysfs-class-led-flash
>> @@ -55,26 +55,35 @@ Description: read only
>> Flash faults are re-read after strobing the flash. Possible
>> flash faults:
>>
>> - * led-over-voltage - flash controller voltage to the flash LED
>> + * led-over-voltage
>> + flash controller voltage to the flash LED
>> has exceeded the limit specific to the flash controller
>> - * flash-timeout-exceeded - the flash strobe was still on when
>> + * flash-timeout-exceeded
>> + the flash strobe was still on when
>> the timeout set by the user has expired; not all flash
>> controllers may set this in all such conditions
>> - * controller-over-temperature - the flash controller has
>> + * controller-over-temperature
>> + the flash controller has
>> overheated
>> - * controller-short-circuit - the short circuit protection
>> + * controller-short-circuit
>> + the short circuit protection
>> of the flash controller has been triggered
>> - * led-power-supply-over-current - current in the LED power
>> + * led-power-supply-over-current
>> + current in the LED power
>> supply has exceeded the limit specific to the flash
>> controller
>> - * indicator-led-fault - the flash controller has detected
>> + * indicator-led-fault
>> + the flash controller has detected
>> a short or open circuit condition on the indicator LED
>> - * led-under-voltage - flash controller voltage to the flash
>> + * led-under-voltage
>> + flash controller voltage to the flash
>> LED has been below the minimum limit specific to
>> the flash
>> - * controller-under-voltage - the input voltage of the flash
>> + * controller-under-voltage
>> + the input voltage of the flash
>> controller is below the limit under which strobing the
>> flash at full current will not be possible;
>> the condition persists until this flag is no longer set
>> - * led-over-temperature - the temperature of the LED has exceeded
>> + * led-over-temperature
>> + the temperature of the LED has exceeded
>> its allowed upper limit
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
>> index 451af6d6768c..646540950e38 100644
>> --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
>> +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
>> @@ -19,18 +19,23 @@ KernelVersion: 4.16
>> Contact: linux-leds@...r.kernel.org
>> Description:
>> Signal the link state of the named network device.
>> +
>> If set to 0 (default), the LED's normal state is off.
>> +
>> If set to 1, the LED's normal state reflects the link state
>> of the named network device.
>> Setting this value also immediately changes the LED state.
>>
>> +
>> What: /sys/class/leds/<led>/tx
>> Date: Dec 2017
>> KernelVersion: 4.16
>> Contact: linux-leds@...r.kernel.org
>> Description:
>> Signal transmission of data on the named network device.
>> +
>> If set to 0 (default), the LED will not blink on transmission.
>> +
>> If set to 1, the LED will blink for the milliseconds specified
>> in interval to signal transmission.
>>
>> @@ -40,6 +45,8 @@ KernelVersion: 4.16
>> Contact: linux-leds@...r.kernel.org
>> Description:
>> Signal reception of data on the named network device.
>> +
>> If set to 0 (default), the LED will not blink on reception.
>> +
>> If set to 1, the LED will blink for the milliseconds specified
>> in interval to signal reception.
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
>> index f440e690daef..eb81152b8348 100644
>> --- a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
>> +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
>> @@ -8,5 +8,6 @@ Description:
>> selected for the USB port trigger. Selecting ports makes trigger
>> observing them for any connected devices and lighting on LED if
>> there are any.
>> +
>> Echoing "1" value selects USB port. Echoing "0" unselects it.
>> Current state can be also read.
>> diff --git a/Documentation/ABI/testing/sysfs-class-leds-gt683r b/Documentation/ABI/testing/sysfs-class-leds-gt683r
>> index 6adab27f646e..b57ffb26e722 100644
>> --- a/Documentation/ABI/testing/sysfs-class-leds-gt683r
>> +++ b/Documentation/ABI/testing/sysfs-class-leds-gt683r
>> @@ -7,9 +7,11 @@ Description:
>> of one LED will update the mode of its two sibling devices as
>> well. Possible values are:
>>
>> - 0 - normal
>> - 1 - audio
>> - 2 - breathing
>> + == =========
>> + 0 normal
>> + 1 audio
>> + 2 breathing
>> + == =========
>>
>> Normal: LEDs are fully on when enabled
>> Audio: LEDs brightness depends on sound level
>> diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
>> index 3b404577f380..7670012ae9b6 100644
>> --- a/Documentation/ABI/testing/sysfs-class-net
>> +++ b/Documentation/ABI/testing/sysfs-class-net
>> @@ -4,10 +4,13 @@ KernelVersion: 3.17
>> Contact: netdev@...r.kernel.org
>> Description:
>> Indicates the name assignment type. Possible values are:
>> - 1: enumerated by the kernel, possibly in an unpredictable way
>> - 2: predictably named by the kernel
>> - 3: named by userspace
>> - 4: renamed
>> +
>> + == ==========================================================
>> + 1 enumerated by the kernel, possibly in an unpredictable way
>> + 2 predictably named by the kernel
>> + 3 named by userspace
>> + 4 renamed
>> + == ==========================================================
>>
>> What: /sys/class/net/<iface>/addr_assign_type
>> Date: July 2010
>> @@ -15,10 +18,13 @@ KernelVersion: 3.2
>> Contact: netdev@...r.kernel.org
>> Description:
>> Indicates the address assignment type. Possible values are:
>> - 0: permanent address
>> - 1: randomly generated
>> - 2: stolen from another device
>> - 3: set using dev_set_mac_address
>> +
>> + == =============================
>> + 0 permanent address
>> + 1 randomly generated
>> + 2 stolen from another device
>> + 3 set using dev_set_mac_address
>> + == =============================
>>
>> What: /sys/class/net/<iface>/addr_len
>> Date: April 2005
>> @@ -51,9 +57,12 @@ Description:
>> Default value 0 does not forward any link local frames.
>>
>> Restricted bits:
>> - 0: 01-80-C2-00-00-00 Bridge Group Address used for STP
>> - 1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
>> - 2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad
>> +
>> + == ========================================================
>> + 0 01-80-C2-00-00-00 Bridge Group Address used for STP
>> + 1 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
>> + 2 01-80-C2-00-00-02 (Link Aggregation) 802.3ad
>> + == ========================================================
>>
>> Any values not setting these bits can be used. Take special
>> care when forwarding control frames e.g. 802.1X-PAE or LLDP.
>> @@ -74,8 +83,11 @@ Contact: netdev@...r.kernel.org
>> Description:
>> Indicates the current physical link state of the interface.
>> Posssible values are:
>> - 0: physical link is down
>> - 1: physical link is up
>> +
>> + == =====================
>> + 0 physical link is down
>> + 1 physical link is up
>> + == =====================
>>
>> Note: some special devices, e.g: bonding and team drivers will
>> allow this attribute to be written to force a link state for
>> @@ -131,8 +143,11 @@ Contact: netdev@...r.kernel.org
>> Description:
>> Indicates whether the interface is under test. Possible
>> values are:
>> - 0: interface is not being tested
>> - 1: interface is being tested
>> +
>> + == =============================
>> + 0 interface is not being tested
>> + 1 interface is being tested
>> + == =============================
>>
>> When an interface is under test, it cannot be expected
>> to pass packets as normal.
>> @@ -144,8 +159,11 @@ Contact: netdev@...r.kernel.org
>> Description:
>> Indicates the interface latest or current duplex value. Possible
>> values are:
>> - half: half duplex
>> - full: full duplex
>> +
>> + ==== ===========
>> + half half duplex
>> + full full duplex
>> + ==== ===========
>>
>> Note: This attribute is only valid for interfaces that implement
>> the ethtool get_link_ksettings method (mostly Ethernet).
>> @@ -196,8 +214,11 @@ Description:
>> Indicates the interface link mode, as a decimal number. This
>> attribute should be used in conjunction with 'dormant' attribute
>> to determine the interface usability. Possible values:
>> - 0: default link mode
>> - 1: dormant link mode
>> +
>> + == =================
>> + 0 default link mode
>> + 1 dormant link mode
>> + == =================
>>
>> What: /sys/class/net/<iface>/mtu
>> Date: April 2005
>> @@ -226,7 +247,9 @@ KernelVersion: 2.6.17
>> Contact: netdev@...r.kernel.org
>> Description:
>> Indicates the interface RFC2863 operational state as a string.
>> +
>> Possible values are:
>> +
>> "unknown", "notpresent", "down", "lowerlayerdown", "testing",
>> "dormant", "up".
>>
>> diff --git a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
>> index f7be0e88b139..06416d0e163d 100644
>> --- a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
>> +++ b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
>> @@ -91,9 +91,9 @@ Date: May 2014
>> KernelVersion: 3.16
>> Contact: Bjørn Mork <bjorn@...k.no>
>> Description:
>> - Bit 0: 16-bit NTB supported (set to 1)
>> - Bit 1: 32-bit NTB supported
>> - Bits 2 – 15: reserved (reset to zero; must be ignored by host)
>> + - Bit 0: 16-bit NTB supported (set to 1)
>> + - Bit 1: 32-bit NTB supported
>> + - Bits 2 – 15: reserved (reset to zero; must be ignored by host)
>>
>> What: /sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize
>> Date: May 2014
>> diff --git a/Documentation/ABI/testing/sysfs-class-net-phydev b/Documentation/ABI/testing/sysfs-class-net-phydev
>> index 206cbf538b59..40ced0ea4316 100644
>> --- a/Documentation/ABI/testing/sysfs-class-net-phydev
>> +++ b/Documentation/ABI/testing/sysfs-class-net-phydev
>> @@ -35,7 +35,9 @@ Description:
>> Ethernet driver during bus enumeration, encoded in string.
>> This interface mode is used to configure the Ethernet MAC with the
>> appropriate mode for its data lines to the PHY hardware.
>> +
>> Possible values are:
>> +
>> <empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
>> rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
>> xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
>> diff --git a/Documentation/ABI/testing/sysfs-class-pktcdvd b/Documentation/ABI/testing/sysfs-class-pktcdvd
>> index dde4f26d0780..ba1ce626591d 100644
>> --- a/Documentation/ABI/testing/sysfs-class-pktcdvd
>> +++ b/Documentation/ABI/testing/sysfs-class-pktcdvd
>> @@ -11,15 +11,17 @@ KernelVersion: 2.6.20
>> Contact: Thomas Maier <balagi@...tmail.de>
>> Description:
>>
>> - add: (WO) Write a block device id (major:minor) to
>> + ========== ==============================================
>> + add (WO) Write a block device id (major:minor) to
>> create a new pktcdvd device and map it to the
>> block device.
>>
>> - remove: (WO) Write the pktcdvd device id (major:minor)
>> + remove (WO) Write the pktcdvd device id (major:minor)
>> to remove the pktcdvd device.
>>
>> - device_map: (RO) Shows the device mapping in format:
>> + device_map (RO) Shows the device mapping in format:
>> pktcdvd[0-7] <pktdevid> <blkdevid>
>> + ========== ==============================================
>>
>>
>> What: /sys/class/pktcdvd/pktcdvd[0-7]/dev
>> @@ -65,29 +67,31 @@ Date: Oct. 2006
>> KernelVersion: 2.6.20
>> Contact: Thomas Maier <balagi@...tmail.de>
>> Description:
>> - size: (RO) Contains the size of the bio write queue.
>> + ============== ================================================
>> + size (RO) Contains the size of the bio write queue.
>>
>> - congestion_off: (RW) If bio write queue size is below this mark,
>> + congestion_off (RW) If bio write queue size is below this mark,
>> accept new bio requests from the block layer.
>>
>> - congestion_on: (RW) If bio write queue size is higher as this
>> + congestion_on (RW) If bio write queue size is higher as this
>> mark, do no longer accept bio write requests
>> from the block layer and wait till the pktcdvd
>> device has processed enough bio's so that bio
>> write queue size is below congestion off mark.
>> A value of <= 0 disables congestion control.
>> + ============== ================================================
>>
>>
>> Example:
>> --------
>> -To use the pktcdvd sysfs interface directly, you can do:
>> +To use the pktcdvd sysfs interface directly, you can do::
>>
>> -# create a new pktcdvd device mapped to /dev/hdc
>> -echo "22:0" >/sys/class/pktcdvd/add
>> -cat /sys/class/pktcdvd/device_map
>> -# assuming device pktcdvd0 was created, look at stat's
>> -cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written
>> -# print the device id of the mapped block device
>> -fgrep pktcdvd0 /sys/class/pktcdvd/device_map
>> -# remove device, using pktcdvd0 device id 253:0
>> -echo "253:0" >/sys/class/pktcdvd/remove
>> + # create a new pktcdvd device mapped to /dev/hdc
>> + echo "22:0" >/sys/class/pktcdvd/add
>> + cat /sys/class/pktcdvd/device_map
>> + # assuming device pktcdvd0 was created, look at stat's
>> + cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written
>> + # print the device id of the mapped block device
>> + fgrep pktcdvd0 /sys/class/pktcdvd/device_map
>> + # remove device, using pktcdvd0 device id 253:0
>> + echo "253:0" >/sys/class/pktcdvd/remove
>> diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
>> index d4319a04c302..d68ad528a8e5 100644
>> --- a/Documentation/ABI/testing/sysfs-class-power
>> +++ b/Documentation/ABI/testing/sysfs-class-power
>> @@ -43,7 +43,9 @@ Date: May 2007
>> Contact: linux-pm@...r.kernel.org
>> Description:
>> Fine grain representation of battery capacity.
>> +
>> Access: Read
>> +
>> Valid values: 0 - 100 (percent)
>>
>> What: /sys/class/power_supply/<supply_name>/capacity_alert_max
>> @@ -58,6 +60,7 @@ Description:
>> low).
>>
>> Access: Read, Write
>> +
>> Valid values: 0 - 100 (percent)
>>
>> What: /sys/class/power_supply/<supply_name>/capacity_alert_min
>> @@ -88,6 +91,7 @@ Description:
>> completely useless.
>>
>> Access: Read
>> +
>> Valid values: 0 - 100 (percent)
>>
>> What: /sys/class/power_supply/<supply_name>/capacity_level
>> @@ -111,6 +115,7 @@ Description:
>> which they average readings to smooth out the reported value.
>>
>> Access: Read
>> +
>> Valid values: Represented in microamps. Negative values are used
>> for discharging batteries, positive values for charging batteries.
>>
>> @@ -131,6 +136,7 @@ Description:
>> This value is not averaged/smoothed.
>>
>> Access: Read
>> +
>> Valid values: Represented in microamps. Negative values are used
>> for discharging batteries, positive values for charging batteries.
>>
>> @@ -383,7 +389,7 @@ Description:
>>
>> **USB Properties**
>>
>> -What: /sys/class/power_supply/<supply_name>/current_avg
>> +What: /sys/class/power_supply/<supply_name>/current_avg
>> Date: May 2007
>> Contact: linux-pm@...r.kernel.org
>> Description:
>> @@ -449,6 +455,7 @@ Description:
>> solved using power limit use input_voltage_limit.
>>
>> Access: Read, Write
>> +
>> Valid values: Represented in microvolts
>>
>> What: /sys/class/power_supply/<supply_name>/input_power_limit
>> @@ -462,6 +469,7 @@ Description:
>> limit only for problems that can be solved using power limit.
>>
>> Access: Read, Write
>> +
>> Valid values: Represented in microwatts
>>
>> What: /sys/class/power_supply/<supply_name>/online,
>> @@ -747,6 +755,7 @@ Description:
>> manufactured.
>>
>> Access: Read
>> +
>> Valid values: Reported as integer
>>
>> What: /sys/class/power_supply/<supply_name>/manufacture_month
>> @@ -756,6 +765,7 @@ Description:
>> Reports the month when the device has been manufactured.
>>
>> Access: Read
>> +
>> Valid values: 1-12
>>
>> What: /sys/class/power_supply/<supply_name>/manufacture_day
>> diff --git a/Documentation/ABI/testing/sysfs-class-power-mp2629 b/Documentation/ABI/testing/sysfs-class-power-mp2629
>> index 327a07e22805..914d67caac0d 100644
>> --- a/Documentation/ABI/testing/sysfs-class-power-mp2629
>> +++ b/Documentation/ABI/testing/sysfs-class-power-mp2629
>> @@ -5,4 +5,5 @@ Description:
>> Represents a battery impedance compensation to accelerate charging.
>>
>> Access: Read, Write
>> +
>> Valid values: Represented in milli-ohms. Valid range is [0, 140].
>> diff --git a/Documentation/ABI/testing/sysfs-class-power-twl4030 b/Documentation/ABI/testing/sysfs-class-power-twl4030
>> index 7ac36dba87bc..b52f7023f8ba 100644
>> --- a/Documentation/ABI/testing/sysfs-class-power-twl4030
>> +++ b/Documentation/ABI/testing/sysfs-class-power-twl4030
>> @@ -6,9 +6,9 @@ Description:
>> Possible values are:
>>
>> ============= ===========================================
>> - "auto" draw power as appropriate for detected
>> + "auto" draw power as appropriate for detected
>> power source and battery status.
>> - "off" do not draw any power.
>> + "off" do not draw any power.
>> "continuous" activate mode described as "linear" in
>> TWL data sheets. This uses whatever
>> current is available and doesn't switch off
>> diff --git a/Documentation/ABI/testing/sysfs-class-rapidio b/Documentation/ABI/testing/sysfs-class-rapidio
>> index 8716beeb16c1..19aefb21b639 100644
>> --- a/Documentation/ABI/testing/sysfs-class-rapidio
>> +++ b/Documentation/ABI/testing/sysfs-class-rapidio
>> @@ -6,6 +6,7 @@ Description:
>> The /sys/class/rapidio_port subdirectory contains individual
>> subdirectories named as "rapidioN" where N = mport ID registered
>> with RapidIO subsystem.
>> +
>> NOTE: An mport ID is not a RapidIO destination ID assigned to a
>> given local mport device.
>>
>> @@ -16,7 +17,9 @@ Contact: Matt Porter <mporter@...nel.crashing.org>,
>> Alexandre Bounine <alexandre.bounine@....com>
>> Description:
>> (RO) reports RapidIO common transport system size:
>> +
>> 0 = small (8-bit destination ID, max. 256 devices),
>> +
>> 1 = large (16-bit destination ID, max. 65536 devices).
>>
>> What: /sys/class/rapidio_port/rapidioN/port_destid
>> @@ -25,31 +28,32 @@ KernelVersion: v3.15
>> Contact: Matt Porter <mporter@...nel.crashing.org>,
>> Alexandre Bounine <alexandre.bounine@....com>
>> Description:
>> - (RO) reports RapidIO destination ID assigned to the given
>> - RapidIO mport device. If value 0xFFFFFFFF is returned this means
>> - that no valid destination ID have been assigned to the mport
>> - (yet). Normally, before enumeration/discovery have been executed
>> - only fabric enumerating mports have a valid destination ID
>> - assigned to them using "hdid=..." rapidio module parameter.
>> +
>> +(RO) reports RapidIO destination ID assigned to the given
>> +RapidIO mport device. If value 0xFFFFFFFF is returned this means
>> +that no valid destination ID have been assigned to the mport
>> +(yet). Normally, before enumeration/discovery have been executed
>> +only fabric enumerating mports have a valid destination ID
>> +assigned to them using "hdid=..." rapidio module parameter.
>>
>> After enumeration or discovery was performed for a given mport device,
>> the corresponding subdirectory will also contain subdirectories for each
>> child RapidIO device connected to the mport.
>>
>> The example below shows mport device subdirectory with several child RapidIO
>> -devices attached to it.
>> +devices attached to it::
>>
>> -[rio@...idio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
>> -total 0
>> -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001
>> -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004
>> -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007
>> -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002
>> -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003
>> -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005
>> -lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0
>> --r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
>> -drwxr-xr-x 2 root root 0 Feb 11 15:11 power
>> -lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port
>> --r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size
>> --rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent
>> + [rio@...idio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
>> + total 0
>> + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001
>> + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004
>> + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007
>> + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002
>> + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003
>> + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005
>> + lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0
>> + -r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
>> + drwxr-xr-x 2 root root 0 Feb 11 15:11 power
>> + lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port
>> + -r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size
>> + -rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent
>> diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
>> index bc578bc60628..8516f08806dd 100644
>> --- a/Documentation/ABI/testing/sysfs-class-regulator
>> +++ b/Documentation/ABI/testing/sysfs-class-regulator
>> @@ -35,13 +35,13 @@ Description:
>>
>> This will be one of the following strings:
>>
>> - off
>> - on
>> - error
>> - fast
>> - normal
>> - idle
>> - standby
>> + - off
>> + - on
>> + - error
>> + - fast
>> + - normal
>> + - idle
>> + - standby
>>
>> "off" means the regulator is not supplying power to the
>> system.
>> @@ -74,9 +74,9 @@ Description:
>>
>> This will be one of the following strings:
>>
>> - 'voltage'
>> - 'current'
>> - 'unknown'
>> + - 'voltage'
>> + - 'current'
>> + - 'unknown'
>>
>> 'voltage' means the regulator output voltage can be controlled
>> by software.
>> @@ -129,11 +129,11 @@ Description:
>>
>> The opmode value can be one of the following strings:
>>
>> - 'fast'
>> - 'normal'
>> - 'idle'
>> - 'standby'
>> - 'unknown'
>> + - 'fast'
>> + - 'normal'
>> + - 'idle'
>> + - 'standby'
>> + - 'unknown'
>>
>> The modes are described in include/linux/regulator/consumer.h
>>
>> @@ -360,9 +360,9 @@ Description:
>>
>> This will be one of the following strings:
>>
>> - 'enabled'
>> - 'disabled'
>> - 'unknown'
>> + - 'enabled'
>> + - 'disabled'
>> + - 'unknown'
>>
>> 'enabled' means the regulator is in bypass mode.
>>
>> diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
>> index 066b9b6f4924..0c9ee55098b8 100644
>> --- a/Documentation/ABI/testing/sysfs-class-remoteproc
>> +++ b/Documentation/ABI/testing/sysfs-class-remoteproc
>> @@ -16,11 +16,11 @@ Description: Remote processor state
>>
>> Reports the state of the remote processor, which will be one of:
>>
>> - "offline"
>> - "suspended"
>> - "running"
>> - "crashed"
>> - "invalid"
>> + - "offline"
>> + - "suspended"
>> + - "running"
>> + - "crashed"
>> + - "invalid"
>>
>> "offline" means the remote processor is powered off.
>>
>> @@ -38,8 +38,8 @@ Description: Remote processor state
>> Writing this file controls the state of the remote processor.
>> The following states can be written:
>>
>> - "start"
>> - "stop"
>> + - "start"
>> + - "stop"
>>
>> Writing "start" will attempt to start the processor running the
>> firmware indicated by, or written to,
>> diff --git a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
>> index ec950c93e5c6..ee8ed6494a01 100644
>> --- a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
>> +++ b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
>> @@ -7,6 +7,7 @@ Description: Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
>> calibrate the AB8500.s 32KHz Real Time Clock.
>> Every 60 seconds the AB8500 will correct the RTC's value
>> by adding to it the value of this attribute.
>> +
>> The range of the attribute is -127 to +127 in units of
>> 30.5 micro-seconds (half-parts-per-million of the 32KHz clock)
>> Users: The /vendor/st-ericsson/base_utilities/core/rtc_calibration
>> diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc
>> index a0578751c1e3..6c5dcad21e19 100644
>> --- a/Documentation/ABI/testing/sysfs-class-uwb_rc
>> +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc
>> @@ -66,11 +66,14 @@ Description:
>> <channel> <type> [<bpst offset>]
>>
>> to start (or stop) scanning on a channel. <type> is one of:
>> - 0 - scan
>> - 1 - scan outside BP
>> - 2 - scan while inactive
>> - 3 - scanning disabled
>> - 4 - scan (with start time of <bpst offset>)
>> +
>> + == =======================================
>> + 0 scan
>> + 1 scan outside BP
>> + 2 scan while inactive
>> + 3 scanning disabled
>> + 4 scan (with start time of <bpst offset>)
>> + == =======================================
>>
>> What: /sys/class/uwb_rc/uwbN/mac_address
>> Date: July 2008
>> diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog
>> index 9860a8b2ba75..585caecda3a5 100644
>> --- a/Documentation/ABI/testing/sysfs-class-watchdog
>> +++ b/Documentation/ABI/testing/sysfs-class-watchdog
>> @@ -91,10 +91,13 @@ Description:
>> h/w strapping (for WDT2 only).
>>
>> At alternate flash the 'access_cs0' sysfs node provides:
>> - ast2400: a way to get access to the primary SPI flash
>> +
>> + ast2400:
>> + a way to get access to the primary SPI flash
>> chip at CS0 after booting from the alternate
>> chip at CS1.
>> - ast2500: a way to restore the normal address mapping
>> + ast2500:
>> + a way to restore the normal address mapping
>> from (CS0->CS1, CS1->CS0) to (CS0->CS0,
>> CS1->CS1).
>>
>> diff --git a/Documentation/ABI/testing/sysfs-dev b/Documentation/ABI/testing/sysfs-dev
>> index a9f2b8b0530f..d1739063e762 100644
>> --- a/Documentation/ABI/testing/sysfs-dev
>> +++ b/Documentation/ABI/testing/sysfs-dev
>> @@ -9,9 +9,10 @@ Description: The /sys/dev tree provides a method to look up the sysfs
>> the form "<major>:<minor>". These links point to the
>> corresponding sysfs path for the given device.
>>
>> - Example:
>> - $ readlink /sys/dev/block/8:32
>> - ../../block/sdc
>> + Example::
>> +
>> + $ readlink /sys/dev/block/8:32
>> + ../../block/sdc
>>
>> Entries in /sys/dev/char and /sys/dev/block will be
>> dynamically created and destroyed as devices enter and
>> diff --git a/Documentation/ABI/testing/sysfs-devices-mapping b/Documentation/ABI/testing/sysfs-devices-mapping
>> index 490ccfd67f12..8d202bac9394 100644
>> --- a/Documentation/ABI/testing/sysfs-devices-mapping
>> +++ b/Documentation/ABI/testing/sysfs-devices-mapping
>> @@ -8,26 +8,27 @@ Description:
>> block.
>> For example, on 4-die Xeon platform with up to 6 IIO stacks per
>> die and, therefore, 6 IIO PMON blocks per die, the mapping of
>> - IIO PMON block 0 exposes as the following:
>> + IIO PMON block 0 exposes as the following::
>>
>> - $ ls /sys/devices/uncore_iio_0/die*
>> - -r--r--r-- /sys/devices/uncore_iio_0/die0
>> - -r--r--r-- /sys/devices/uncore_iio_0/die1
>> - -r--r--r-- /sys/devices/uncore_iio_0/die2
>> - -r--r--r-- /sys/devices/uncore_iio_0/die3
>> + $ ls /sys/devices/uncore_iio_0/die*
>> + -r--r--r-- /sys/devices/uncore_iio_0/die0
>> + -r--r--r-- /sys/devices/uncore_iio_0/die1
>> + -r--r--r-- /sys/devices/uncore_iio_0/die2
>> + -r--r--r-- /sys/devices/uncore_iio_0/die3
>>
>> - $ tail /sys/devices/uncore_iio_0/die*
>> - ==> /sys/devices/uncore_iio_0/die0 <==
>> - 0000:00
>> - ==> /sys/devices/uncore_iio_0/die1 <==
>> - 0000:40
>> - ==> /sys/devices/uncore_iio_0/die2 <==
>> - 0000:80
>> - ==> /sys/devices/uncore_iio_0/die3 <==
>> - 0000:c0
>> + $ tail /sys/devices/uncore_iio_0/die*
>> + ==> /sys/devices/uncore_iio_0/die0 <==
>> + 0000:00
>> + ==> /sys/devices/uncore_iio_0/die1 <==
>> + 0000:40
>> + ==> /sys/devices/uncore_iio_0/die2 <==
>> + 0000:80
>> + ==> /sys/devices/uncore_iio_0/die3 <==
>> + 0000:c0
>>
>> - Which means:
>> - IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000
>> - IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000
>> - IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000
>> - IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000
>> + Which means::
>> +
>> + IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000
>> + IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000
>> + IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000
>> + IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000
>> diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
>> index deef3b5723cf..2da2b1fba2c1 100644
>> --- a/Documentation/ABI/testing/sysfs-devices-memory
>> +++ b/Documentation/ABI/testing/sysfs-devices-memory
>> @@ -47,16 +47,19 @@ Description:
>> online/offline state of the memory section. When written,
>> root can toggle the the online/offline state of a removable
>> memory section (see removable file description above)
>> - using the following commands.
>> - # echo online > /sys/devices/system/memory/memoryX/state
>> - # echo offline > /sys/devices/system/memory/memoryX/state
>> + using the following commands::
>> +
>> + # echo online > /sys/devices/system/memory/memoryX/state
>> + # echo offline > /sys/devices/system/memory/memoryX/state
>>
>> For example, if /sys/devices/system/memory/memory22/removable
>> contains a value of 1 and
>> /sys/devices/system/memory/memory22/state contains the
>> string "online" the following command can be executed by
>> - by root to offline that section.
>> - # echo offline > /sys/devices/system/memory/memory22/state
>> + by root to offline that section::
>> +
>> + # echo offline > /sys/devices/system/memory/memory22/state
>> +
>> Users: hotplug memory remove tools
>> http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
>>
>> @@ -78,6 +81,7 @@ Description:
>>
>> For example, the following symbolic link is created for
>> memory section 9 on node0:
>> +
>> /sys/devices/system/memory/memory9/node0 -> ../../node/node0
>>
>>
>> @@ -90,4 +94,5 @@ Description:
>> points to the corresponding /sys/devices/system/memory/memoryY
>> memory section directory. For example, the following symbolic
>> link is created for memory section 9 on node0.
>> +
>> /sys/devices/system/node/node0/memory9 -> ../../memory/memory9
>> diff --git a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
>> index d548eaac230a..40f29a01fd14 100644
>> --- a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
>> +++ b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
>> @@ -3,8 +3,9 @@ Date: April 2010
>> Contact: Fabien Chouteau <fabien.chouteau@...co.com>
>> Description:
>> Show the suspend state of an USB composite gadget.
>> - 1 -> suspended
>> - 0 -> resumed
>> +
>> + - 1 -> suspended
>> + - 0 -> resumed
>>
>> (_UDC_ is the name of the USB Device Controller driver)
>>
>> @@ -17,5 +18,6 @@ Description:
>> Storage mode.
>>
>> Possible values are:
>> - 1 -> ignore the FUA flag
>> - 0 -> obey the FUA flag
>> +
>> + - 1 -> ignore the FUA flag
>> + - 0 -> obey the FUA flag
>> diff --git a/Documentation/ABI/testing/sysfs-devices-platform-ipmi b/Documentation/ABI/testing/sysfs-devices-platform-ipmi
>> index afb5db856e1c..07df0ddc0b69 100644
>> --- a/Documentation/ABI/testing/sysfs-devices-platform-ipmi
>> +++ b/Documentation/ABI/testing/sysfs-devices-platform-ipmi
>> @@ -123,38 +123,40 @@ KernelVersion: v4.15
>> Contact: openipmi-developer@...ts.sourceforge.net
>> Description:
>>
>> - idles: (RO) Number of times the interface was
>> + ====================== ========================================
>> + idles (RO) Number of times the interface was
>> idle while being polled.
>>
>> - watchdog_pretimeouts: (RO) Number of watchdog pretimeouts.
>> + watchdog_pretimeouts (RO) Number of watchdog pretimeouts.
>>
>> - complete_transactions: (RO) Number of completed messages.
>> + complete_transactions (RO) Number of completed messages.
>>
>> - events: (RO) Number of IPMI events received from
>> + events (RO) Number of IPMI events received from
>> the hardware.
>>
>> - interrupts: (RO) Number of interrupts the driver
>> + interrupts (RO) Number of interrupts the driver
>> handled.
>>
>> - hosed_count: (RO) Number of times the hardware didn't
>> + hosed_count (RO) Number of times the hardware didn't
>> follow the state machine.
>>
>> - long_timeouts: (RO) Number of times the driver
>> + long_timeouts (RO) Number of times the driver
>> requested a timer while nothing was in
>> progress.
>>
>> - flag_fetches: (RO) Number of times the driver
>> + flag_fetches (RO) Number of times the driver
>> requested flags from the hardware.
>>
>> - attentions: (RO) Number of time the driver got an
>> + attentions (RO) Number of time the driver got an
>> ATTN from the hardware.
>>
>> - incoming_messages: (RO) Number of asynchronous messages
>> + incoming_messages (RO) Number of asynchronous messages
>> received.
>>
>> - short_timeouts: (RO) Number of times the driver
>> + short_timeouts (RO) Number of times the driver
>> requested a timer while an operation was
>> in progress.
>> + ====================== ========================================
>>
>>
>> What: /sys/devices/platform/ipmi_si.*/interrupts_enabled
>> @@ -201,38 +203,40 @@ Date: Sep, 2017
>> KernelVersion: v4.15
>> Contact: openipmi-developer@...ts.sourceforge.net
>> Description:
>> - hosed: (RO) Number of times the hardware didn't
>> + ====================== ========================================
>> + hosed (RO) Number of times the hardware didn't
>> follow the state machine.
>>
>> - alerts: (RO) Number of alerts received.
>> + alerts (RO) Number of alerts received.
>>
>> - sent_messages: (RO) Number of total messages sent.
>> + sent_messages (RO) Number of total messages sent.
>>
>> - sent_message_parts: (RO) Number of message parts sent.
>> + sent_message_parts (RO) Number of message parts sent.
>> Messages may be broken into parts if
>> they are long.
>>
>> - received_messages: (RO) Number of message responses
>> + received_messages (RO) Number of message responses
>> received.
>>
>> - received_message_parts: (RO) Number of message fragments
>> + received_message_parts (RO) Number of message fragments
>> received.
>>
>> - events: (RO) Number of received events.
>> + events (RO) Number of received events.
>>
>> - watchdog_pretimeouts: (RO) Number of watchdog pretimeouts.
>> + watchdog_pretimeouts (RO) Number of watchdog pretimeouts.
>>
>> - flag_fetches: (RO) Number of times a flag fetch was
>> + flag_fetches (RO) Number of times a flag fetch was
>> requested.
>>
>> - send_retries: (RO) Number of time a message was
>> + send_retries (RO) Number of time a message was
>> retried.
>>
>> - receive_retries: (RO) Number of times the receive of a
>> + receive_retries (RO) Number of times the receive of a
>> message was retried.
>>
>> - send_errors: (RO) Number of times the send of a
>> + send_errors (RO) Number of times the send of a
>> message failed.
>>
>> - receive_errors: (RO) Number of errors in receiving
>> + receive_errors (RO) Number of errors in receiving
>> messages.
>> + ====================== ========================================
>> diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
>> index 274c337ec6a9..1a04ca8162ad 100644
>> --- a/Documentation/ABI/testing/sysfs-devices-system-cpu
>> +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
>> @@ -169,7 +169,7 @@ Description:
>> observed CPU idle duration was too short for it
>> (a count).
>>
>> - below: (RO) Number of times this state was entered, but the
>> + below: (RO) Number of times this state was entered, but the
>> observed CPU idle duration was too long for it
>> (a count).
>> ======== ==== =================================================
>> @@ -601,7 +601,7 @@ Description: Secure Virtual Machine
>> Facility in POWER9 and newer processors. i.e., it is a Secure
>> Virtual Machine.
>>
>> -What: /sys/devices/system/cpu/cpuX/purr
>> +What: /sys/devices/system/cpu/cpuX/purr
>> Date: Apr 2005
>> Contact: Linux for PowerPC mailing list <linuxppc-dev@...abs.org>
>> Description: PURR ticks for this CPU since the system boot.
>> diff --git a/Documentation/ABI/testing/sysfs-driver-hid-lenovo b/Documentation/ABI/testing/sysfs-driver-hid-lenovo
>> index 53a0725962e1..aee85ca1f6be 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-hid-lenovo
>> +++ b/Documentation/ABI/testing/sysfs-driver-hid-lenovo
>> @@ -3,14 +3,18 @@ Date: July 2011
>> Contact: linux-input@...r.kernel.org
>> Description: This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be
>> is being controlled by press_speed.
>> +
>> Values are 0 or 1.
>> +
>> Applies to Thinkpad USB Keyboard with TrackPoint.
>>
>> What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/dragging
>> Date: July 2011
>> Contact: linux-input@...r.kernel.org
>> Description: If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled.
>> +
>> Values are 0 or 1.
>> +
>> Applies to Thinkpad USB Keyboard with TrackPoint.
>>
>> What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/release_to_select
>> @@ -25,7 +29,9 @@ Date: July 2011
>> Contact: linux-input@...r.kernel.org
>> Description: This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate
>> a left or right mouse button click.
>> +
>> Values are 0 or 1.
>> +
>> Applies to Thinkpad USB Keyboard with TrackPoint.
>>
>> What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/sensitivity
>> @@ -39,12 +45,16 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
>> Date: July 2011
>> Contact: linux-input@...r.kernel.org
>> Description: This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled.
>> +
>> Values are decimal integers from 1 (slowest) to 255 (fastest).
>> +
>> Applies to Thinkpad USB Keyboard with TrackPoint.
>>
>> What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fn_lock
>> Date: July 2014
>> Contact: linux-input@...r.kernel.org
>> Description: This setting controls whether Fn Lock is enabled on the keyboard (i.e. if F1 is Mute or F1)
>> +
>> Values are 0 or 1
>> +
>> Applies to ThinkPad Compact (USB|Bluetooth) Keyboard with TrackPoint.
>> diff --git a/Documentation/ABI/testing/sysfs-driver-hid-ntrig b/Documentation/ABI/testing/sysfs-driver-hid-ntrig
>> index e574a5625efe..0e323a5cec6c 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-hid-ntrig
>> +++ b/Documentation/ABI/testing/sysfs-driver-hid-ntrig
>> @@ -29,12 +29,13 @@ Contact: linux-input@...r.kernel.org
>> Description:
>> Threholds to override activation slack.
>>
>> - activation_width: (RW) Width threshold to immediately
>> + ================= =====================================
>> + activation_width (RW) Width threshold to immediately
>> start processing touch events.
>>
>> - activation_height: (RW) Height threshold to immediately
>> + activation_height (RW) Height threshold to immediately
>> start processing touch events.
>> -
>> + ================= =====================================
>>
>> What: /sys/bus/hid/drivers/ntrig/<dev>/min_width
>> What: /sys/bus/hid/drivers/ntrig/<dev>/min_height
>> @@ -44,11 +45,13 @@ Contact: linux-input@...r.kernel.org
>> Description:
>> Minimum size contact accepted.
>>
>> - min_width: (RW) Minimum touch contact width to decide
>> + ========== ===========================================
>> + min_width (RW) Minimum touch contact width to decide
>> activation and activity.
>>
>> - min_height: (RW) Minimum touch contact height to decide
>> + min_height (RW) Minimum touch contact height to decide
>> activation and activity.
>> + ========== ===========================================
>>
>>
>> What: /sys/bus/hid/drivers/ntrig/<dev>/sensor_physical_width
>> diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
>> index 8f7982c70d72..11cd9bf0ad18 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
>> +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
>> @@ -3,17 +3,21 @@ Date: March 2010
>> Contact: Stefan Achatz <erazor_de@...rs.sourceforge.net>
>> Description: It is possible to switch the dpi setting of the mouse with the
>> press of a button.
>> +
>> When read, this file returns the raw number of the actual dpi
>> setting reported by the mouse. This number has to be further
>> processed to receive the real dpi value:
>>
>> + ===== =====
>> VALUE DPI
>> + ===== =====
>> 1 800
>> 2 1200
>> 3 1600
>> 4 2000
>> 5 2400
>> 6 3200
>> + ===== =====
>>
>> This file is readonly.
>> Users: http://roccat.sourceforge.net
>> @@ -22,6 +26,7 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
>> Date: March 2010
>> Contact: Stefan Achatz <erazor_de@...rs.sourceforge.net>
>> Description: When read, this file returns the number of the actual profile.
>> +
>> This file is readonly.
>> Users: http://roccat.sourceforge.net
>>
>> @@ -33,6 +38,7 @@ Description: When read, this file returns the raw integer version number of the
>> further usage in other programs. To receive the real version
>> number the decimal point has to be shifted 2 positions to the
>> left. E.g. a returned value of 138 means 1.38
>> +
>> This file is readonly.
>> Users: http://roccat.sourceforge.net
>>
>> @@ -43,10 +49,13 @@ Description: The mouse can store 5 profiles which can be switched by the
>> press of a button. A profile holds information like button
>> mappings, sensitivity, the colors of the 5 leds and light
>> effects.
>> +
>> When read, these files return the respective profile. The
>> returned data is 975 bytes in size.
>> +
>> When written, this file lets one write the respective profile
>> data back to the mouse. The data has to be 975 bytes long.
>> +
>> The mouse will reject invalid data, whereas the profile number
>> stored in the profile doesn't need to fit the number of the
>> store.
>> @@ -58,6 +67,7 @@ Contact: Stefan Achatz <erazor_de@...rs.sourceforge.net>
>> Description: When read, this file returns the settings stored in the mouse.
>> The size of the data is 36 bytes and holds information like the
>> startup_profile, tcu state and calibration_data.
>> +
>> When written, this file lets write settings back to the mouse.
>> The data has to be 36 bytes long. The mouse will reject invalid
>> data.
>> @@ -67,8 +77,10 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
>> Date: March 2010
>> Contact: Stefan Achatz <erazor_de@...rs.sourceforge.net>
>> Description: The integer value of this attribute ranges from 1 to 5.
>> +
>> When read, this attribute returns the number of the profile
>> that's active when the mouse is powered on.
>> +
>> When written, this file sets the number of the startup profile
>> and the mouse activates this profile immediately.
>> Users: http://roccat.sourceforge.net
>> @@ -80,9 +92,12 @@ Description: The mouse has a "Tracking Control Unit" which lets the user
>> calibrate the laser power to fit the mousepad surface.
>> When read, this file returns the current state of the TCU,
>> where 0 means off and 1 means on.
>> +
>> Writing 0 in this file will switch the TCU off.
>> +
>> Writing 1 in this file will start the calibration which takes
>> around 6 seconds to complete and activates the TCU.
>> +
>> Users: http://roccat.sourceforge.net
>>
>> What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/weight
>> @@ -93,14 +108,18 @@ Description: The mouse can be equipped with one of four supplied weights
>> and its value can be read out. When read, this file returns the
>> raw value returned by the mouse which eases further processing
>> in other software.
>> +
>> The values map to the weights as follows:
>>
>> + ===== ======
>> VALUE WEIGHT
>> + ===== ======
>> 0 none
>> 1 5g
>> 2 10g
>> 3 15g
>> 4 20g
>> + ===== ======
>>
>> This file is readonly.
>> Users: http://roccat.sourceforge.net
>> diff --git a/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
>> index cd7b82a5c27d..3bf43d9dcdfe 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-hid-wiimote
>> +++ b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
>> @@ -20,6 +20,7 @@ Description: This file contains the currently connected and initialized
>> the official Nintendo Nunchuck extension and classic is the
>> Nintendo Classic Controller extension. The motionp extension can
>> be combined with the other two.
>> +
>> Starting with kernel-version 3.11 Motion Plus hotplugging is
>> supported and if detected, it's no longer reported as static
>> extension. You will get uevent notifications for the motion-plus
>> diff --git a/Documentation/ABI/testing/sysfs-driver-input-exc3000 b/Documentation/ABI/testing/sysfs-driver-input-exc3000
>> index 3d316d54f81c..cd7c578aef2c 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-input-exc3000
>> +++ b/Documentation/ABI/testing/sysfs-driver-input-exc3000
>> @@ -4,6 +4,7 @@ Contact: linux-input@...r.kernel.org
>> Description: Reports the firmware version provided by the touchscreen, for example "00_T6" on a EXC80H60
>>
>> Access: Read
>> +
>> Valid values: Represented as string
>>
>> What: /sys/bus/i2c/devices/xxx/model
>> @@ -12,4 +13,5 @@ Contact: linux-input@...r.kernel.org
>> Description: Reports the model identification provided by the touchscreen, for example "Orion_1320" on a EXC80H60
>>
>> Access: Read
>> +
>> Valid values: Represented as string
>> diff --git a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>> index bb6f5d6ceea0..4cf595d681e6 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>> +++ b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse
>> @@ -4,7 +4,9 @@ Contact: PrasannaKumar Muralidharan <prasannatsmkumar@...il.com>
>> Description: read-only access to the efuse on the Ingenic JZ4780 SoC
>> The SoC has a one time programmable 8K efuse that is
>> split into segments. The driver supports read only.
>> - The segments are
>> + The segments are:
>> +
>> + ===== ======== =================
>> 0x000 64 bit Random Number
>> 0x008 128 bit Ingenic Chip ID
>> 0x018 128 bit Customer ID
>> @@ -12,5 +14,7 @@ Description: read-only access to the efuse on the Ingenic JZ4780 SoC
>> 0x1E0 8 bit Protect Segment
>> 0x1E1 2296 bit HDMI Key
>> 0x300 2048 bit Security boot key
>> + ===== ======== =================
>> +
>> Users: any user space application which wants to read the Chip
>> and Customer ID
>> diff --git a/Documentation/ABI/testing/sysfs-driver-pciback b/Documentation/ABI/testing/sysfs-driver-pciback
>> index 73308c2b81b0..49f5fd0c8bbd 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-pciback
>> +++ b/Documentation/ABI/testing/sysfs-driver-pciback
>> @@ -7,8 +7,10 @@ Description:
>> the format of DDDD:BB:DD.F-REG:SIZE:MASK will allow the guest
>> to write and read from the PCI device. That is Domain:Bus:
>> Device.Function-Register:Size:Mask (Domain is optional).
>> - For example:
>> - #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks
>> + For example::
>> +
>> + #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks
>> +
>> will allow the guest to read and write to the configuration
>> register 0x0E.
>>
>> diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
>> index d1a352194d2e..adc0d0e91607 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-ufs
>> +++ b/Documentation/ABI/testing/sysfs-driver-ufs
>> @@ -18,6 +18,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the device type. This is one of the UFS
>> device descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
>> @@ -26,6 +27,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the device class. This is one of the UFS
>> device descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
>> @@ -34,6 +36,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the UFS storage subclass. This is one of
>> the UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
>> @@ -43,6 +46,7 @@ Description: This file shows the protocol supported by an UFS device.
>> This is one of the UFS device descriptor parameters.
>> The full information about the descriptor could be found
>> at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
>> @@ -51,6 +55,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows number of logical units. This is one of
>> the UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
>> @@ -60,6 +65,7 @@ Description: This file shows number of well known logical units.
>> This is one of the UFS device descriptor parameters.
>> The full information about the descriptor could be found
>> at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
>> @@ -69,6 +75,7 @@ Description: This file shows value that indicates whether the device is
>> enabled for boot. This is one of the UFS device descriptor
>> parameters. The full information about the descriptor could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
>> @@ -79,6 +86,7 @@ Description: This file shows value that indicates whether the device
>> of the boot sequence. This is one of the UFS device descriptor
>> parameters. The full information about the descriptor could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
>> @@ -88,6 +96,7 @@ Description: This file shows value that defines the power mode after
>> device initialization or hardware reset. This is one of
>> the UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
>> @@ -96,6 +105,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the high priority lun. This is one of
>> the UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
>> @@ -104,6 +114,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the secure removal type. This is one of
>> the UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
>> @@ -113,6 +124,7 @@ Description: This file shows whether the security lun is supported.
>> This is one of the UFS device descriptor parameters.
>> The full information about the descriptor could be found
>> at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
>> @@ -122,6 +134,7 @@ Description: This file shows the background operations termination
>> latency. This is one of the UFS device descriptor parameters.
>> The full information about the descriptor could be found
>> at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
>> @@ -130,6 +143,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the initial active ICC level. This is one
>> of the UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
>> @@ -138,6 +152,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the specification version. This is one
>> of the UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
>> @@ -147,6 +162,7 @@ Description: This file shows the manufacturing date in BCD format.
>> This is one of the UFS device descriptor parameters.
>> The full information about the descriptor could be found
>> at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
>> @@ -155,6 +171,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the manufacturee ID. This is one of the
>> UFS device descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
>> @@ -164,6 +181,7 @@ Description: This file shows the maximum number of outstanding RTTs
>> supported by the device. This is one of the UFS device
>> descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
>> @@ -173,6 +191,7 @@ Description: This file shows the frequency and method of the realtime
>> clock update. This is one of the UFS device descriptor
>> parameters. The full information about the descriptor
>> could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
>> @@ -182,6 +201,7 @@ Description: This file shows which features are supported by the device.
>> This is one of the UFS device descriptor parameters.
>> The full information about the descriptor could be
>> found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
>> @@ -190,6 +210,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the FFU timeout. This is one of the
>> UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
>> @@ -198,6 +219,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the device queue depth. This is one of the
>> UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
>> @@ -206,6 +228,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the device version. This is one of the
>> UFS device descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
>> @@ -215,6 +238,7 @@ Description: This file shows number of secure write protect areas
>> supported by the device. This is one of the UFS device
>> descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
>> @@ -225,6 +249,7 @@ Description: This file shows the maximum amount of data that may be
>> This is one of the UFS device descriptor parameters.
>> The full information about the descriptor could be found
>> at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
>> @@ -234,6 +259,7 @@ Description: This file shows the command maximum timeout for a change
>> in PSA state. This is one of the UFS device descriptor
>> parameters. The full information about the descriptor could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -244,6 +270,7 @@ Description: This file shows the MIPI UniPro version number in BCD format.
>> This is one of the UFS interconnect descriptor parameters.
>> The full information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
>> @@ -253,6 +280,7 @@ Description: This file shows the MIPI M-PHY version number in BCD format.
>> This is one of the UFS interconnect descriptor parameters.
>> The full information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -264,6 +292,7 @@ Description: This file shows the total memory quantity available to
>> of the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
>> @@ -273,6 +302,7 @@ Description: This file shows the maximum number of logical units
>> supported by the UFS device. This is one of the UFS
>> geometry descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
>> @@ -281,6 +311,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the segment size. This is one of the UFS
>> geometry descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
>> @@ -289,6 +320,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the allocation unit size. This is one of
>> the UFS geometry descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
>> @@ -298,6 +330,7 @@ Description: This file shows the minimum addressable block size. This
>> is one of the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at UFS
>> specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
>> @@ -307,6 +340,7 @@ Description: This file shows the optimal read block size. This is one
>> of the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at UFS
>> specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
>> @@ -316,6 +350,7 @@ Description: This file shows the optimal write block size. This is one
>> of the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at UFS
>> specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
>> @@ -325,6 +360,7 @@ Description: This file shows the maximum data-in buffer size. This
>> is one of the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at UFS
>> specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
>> @@ -334,6 +370,7 @@ Description: This file shows the maximum data-out buffer size. This
>> is one of the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at UFS
>> specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
>> @@ -343,6 +380,7 @@ Description: This file shows the maximum number of RPMB frames allowed
>> in Security Protocol In/Out. This is one of the UFS geometry
>> descriptor parameters. The full information about the
>> descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
>> @@ -352,6 +390,7 @@ Description: This file shows the dynamic capacity resource policy. This
>> is one of the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
>> @@ -361,6 +400,7 @@ Description: This file shows support for out-of-order data transfer.
>> This is one of the UFS geometry descriptor parameters.
>> The full information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
>> @@ -370,6 +410,7 @@ Description: This file shows maximum available number of contexts which
>> are supported by the device. This is one of the UFS geometry
>> descriptor parameters. The full information about the
>> descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
>> @@ -378,6 +419,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows system data tag unit size. This is one of
>> the UFS geometry descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
>> @@ -388,6 +430,7 @@ Description: This file shows maximum storage area size allocated by
>> This is one of the UFS geometry descriptor parameters.
>> The full information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
>> @@ -397,6 +440,7 @@ Description: This file shows supported secure removal types. This is
>> one of the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
>> @@ -406,6 +450,7 @@ Description: This file shows supported memory types. This is one of
>> the UFS geometry descriptor parameters. The full
>> information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
>> @@ -416,6 +461,7 @@ Description: This file shows the maximum number of allocation units for
>> enhanced type 1-4). This is one of the UFS geometry
>> descriptor parameters. The full information about the
>> descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
>> @@ -426,6 +472,7 @@ Description: This file shows the memory capacity adjustment factor for
>> enhanced type 1-4). This is one of the UFS geometry
>> descriptor parameters. The full information about the
>> descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -436,6 +483,7 @@ Description: This file shows preend of life information. This is one
>> of the UFS health descriptor parameters. The full
>> information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
>> @@ -445,6 +493,7 @@ Description: This file shows indication of the device life time
>> (method a). This is one of the UFS health descriptor
>> parameters. The full information about the descriptor
>> could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
>> @@ -454,6 +503,7 @@ Description: This file shows indication of the device life time
>> (method b). This is one of the UFS health descriptor
>> parameters. The full information about the descriptor
>> could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -464,6 +514,7 @@ Description: This file shows maximum VCC, VCCQ and VCCQ2 value for
>> active ICC levels from 0 to 15. This is one of the UFS
>> power descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -473,6 +524,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file contains a device manufactureer name string.
>> The full information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
>> @@ -480,6 +532,7 @@ Date: February 2018
>> Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file contains a product name string. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
>> @@ -487,6 +540,7 @@ Date: February 2018
>> Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file contains a OEM ID string. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
>> @@ -495,6 +549,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file contains a device serial number string. The full
>> information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
>> @@ -503,6 +558,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file contains a product revision string. The full
>> information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -512,6 +568,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows boot LUN information. This is one of
>> the UFS unit descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect
>> @@ -520,6 +577,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows LUN write protection status. This is one of
>> the UFS unit descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth
>> @@ -528,6 +586,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows LUN queue depth. This is one of the UFS
>> unit descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive
>> @@ -536,6 +595,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows PSA sensitivity. This is one of the UFS
>> unit descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type
>> @@ -544,6 +604,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows LUN memory type. This is one of the UFS
>> unit descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability
>> @@ -553,6 +614,7 @@ Description: This file defines the device behavior when a power failure
>> occurs during a write operation. This is one of the UFS
>> unit descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size
>> @@ -562,6 +624,7 @@ Description: This file shows the size of addressable logical blocks
>> (calculated as an exponent with base 2). This is one of
>> the UFS unit descriptor parameters. The full information about
>> the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count
>> @@ -571,6 +634,7 @@ Description: This file shows total number of addressable logical blocks.
>> This is one of the UFS unit descriptor parameters. The full
>> information about the descriptor could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size
>> @@ -579,6 +643,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the erase block size. This is one of
>> the UFS unit descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type
>> @@ -587,6 +652,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the thin provisioning type. This is one of
>> the UFS unit descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
>> @@ -595,6 +661,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the total physical memory resources. This is
>> one of the UFS unit descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities
>> @@ -603,6 +670,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the context capabilities. This is one of
>> the UFS unit descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity
>> @@ -611,6 +679,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the granularity of the LUN. This is one of
>> the UFS unit descriptor parameters. The full information
>> about the descriptor could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -619,6 +688,7 @@ Date: February 2018
>> Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the device init status. The full information
>> about the flag could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
>> @@ -627,6 +697,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows whether permanent write protection is enabled.
>> The full information about the flag could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
>> @@ -636,6 +707,7 @@ Description: This file shows whether write protection is enabled on all
>> logical units configured as power on write protected. The
>> full information about the flag could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
>> @@ -644,6 +716,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows whether the device background operations are
>> enabled. The full information about the flag could be
>> found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
>> @@ -652,6 +725,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows whether the device life span mode is enabled.
>> The full information about the flag could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
>> @@ -660,6 +734,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows whether physical resource removal is enable.
>> The full information about the flag could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
>> @@ -668,6 +743,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows whether the device is executing internal
>> operation related to real time clock. The full information
>> about the flag could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
>> @@ -676,6 +752,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows whether the device FW update is permanently
>> disabled. The full information about the flag could be found
>> at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -685,6 +762,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the boot lun enabled UFS device attribute.
>> The full information about the attribute could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
>> @@ -693,6 +771,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the current power mode UFS device attribute.
>> The full information about the attribute could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
>> @@ -701,6 +780,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the active icc level UFS device attribute.
>> The full information about the attribute could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
>> @@ -709,6 +789,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the out of order data transfer enabled UFS
>> device attribute. The full information about the attribute
>> could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
>> @@ -717,6 +798,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the background operations status UFS device
>> attribute. The full information about the attribute could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
>> @@ -725,6 +807,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the purge operation status UFS device
>> attribute. The full information about the attribute could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
>> @@ -733,6 +816,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the maximum data size in a DATA IN
>> UPIU. The full information about the attribute could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
>> @@ -741,6 +825,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file shows the maximum number of bytes that can be
>> requested with a READY TO TRANSFER UPIU. The full information
>> about the attribute could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
>> @@ -749,6 +834,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the reference clock frequency UFS device
>> attribute. The full information about the attribute could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
>> @@ -765,6 +851,7 @@ Description: This file provides the maximum current number of
>> outstanding RTTs in device that is allowed. The full
>> information about the attribute could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
>> @@ -773,6 +860,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the exception event control UFS device
>> attribute. The full information about the attribute could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
>> @@ -781,6 +869,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the exception event status UFS device
>> attribute. The full information about the attribute could
>> be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
>> @@ -789,6 +878,7 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file provides the ffu status UFS device attribute.
>> The full information about the attribute could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
>> @@ -796,6 +886,7 @@ Date: February 2018
>> Contact: Stanislav Nijnikov <stanislav.nijnikov@....com>
>> Description: This file show the PSA feature status. The full information
>> about the attribute could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
>> @@ -805,6 +896,7 @@ Description: This file shows the amount of data that the host plans to
>> load to all logical units in pre-soldering state.
>> The full information about the attribute could be found at
>> UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -815,6 +907,7 @@ Description: This file shows the The amount of physical memory needed
>> to be removed from the physical memory resources pool of
>> the particular logical unit. The full information about
>> the attribute could be found at UFS specifications 2.1.
>> +
>> The file is read only.
>>
>>
>> @@ -824,24 +917,28 @@ Contact: Subhash Jadavani <subhashj@...eaurora.org>
>> Description: This entry could be used to set or show the UFS device
>> runtime power management level. The current driver
>> implementation supports 6 levels with next target states:
>> - 0 - an UFS device will stay active, an UIC link will
>> - stay active
>> - 1 - an UFS device will stay active, an UIC link will
>> - hibernate
>> - 2 - an UFS device will moved to sleep, an UIC link will
>> - stay active
>> - 3 - an UFS device will moved to sleep, an UIC link will
>> - hibernate
>> - 4 - an UFS device will be powered off, an UIC link will
>> - hibernate
>> - 5 - an UFS device will be powered off, an UIC link will
>> - be powered off
>> +
>> + == ====================================================
>> + 0 an UFS device will stay active, an UIC link will
>> + stay active
>> + 1 an UFS device will stay active, an UIC link will
>> + hibernate
>> + 2 an UFS device will moved to sleep, an UIC link will
>> + stay active
>> + 3 an UFS device will moved to sleep, an UIC link will
>> + hibernate
>> + 4 an UFS device will be powered off, an UIC link will
>> + hibernate
>> + 5 an UFS device will be powered off, an UIC link will
>> + be powered off
>> + == ====================================================
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
>> Date: February 2018
>> Contact: Subhash Jadavani <subhashj@...eaurora.org>
>> Description: This entry shows the target power mode of an UFS device
>> for the chosen runtime power management level.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
>> @@ -849,6 +946,7 @@ Date: February 2018
>> Contact: Subhash Jadavani <subhashj@...eaurora.org>
>> Description: This entry shows the target state of an UFS UIC link
>> for the chosen runtime power management level.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl
>> @@ -857,24 +955,28 @@ Contact: Subhash Jadavani <subhashj@...eaurora.org>
>> Description: This entry could be used to set or show the UFS device
>> system power management level. The current driver
>> implementation supports 6 levels with next target states:
>> - 0 - an UFS device will stay active, an UIC link will
>> - stay active
>> - 1 - an UFS device will stay active, an UIC link will
>> - hibernate
>> - 2 - an UFS device will moved to sleep, an UIC link will
>> - stay active
>> - 3 - an UFS device will moved to sleep, an UIC link will
>> - hibernate
>> - 4 - an UFS device will be powered off, an UIC link will
>> - hibernate
>> - 5 - an UFS device will be powered off, an UIC link will
>> - be powered off
>> +
>> + == ====================================================
>> + 0 an UFS device will stay active, an UIC link will
>> + stay active
>> + 1 an UFS device will stay active, an UIC link will
>> + hibernate
>> + 2 an UFS device will moved to sleep, an UIC link will
>> + stay active
>> + 3 an UFS device will moved to sleep, an UIC link will
>> + hibernate
>> + 4 an UFS device will be powered off, an UIC link will
>> + hibernate
>> + 5 an UFS device will be powered off, an UIC link will
>> + be powered off
>> + == ====================================================
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
>> Date: February 2018
>> Contact: Subhash Jadavani <subhashj@...eaurora.org>
>> Description: This entry shows the target power mode of an UFS device
>> for the chosen system power management level.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
>> @@ -882,18 +984,21 @@ Date: February 2018
>> Contact: Subhash Jadavani <subhashj@...eaurora.org>
>> Description: This entry shows the target state of an UFS UIC link
>> for the chosen system power management level.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
>> Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows if preserve user-space was configured
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
>> Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the shared allocated units of WB buffer
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
>> @@ -901,6 +1006,7 @@ Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the configured WB type.
>> 0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
>> @@ -910,6 +1016,7 @@ Description: This entry shows the total user-space decrease in shared
>> buffer mode.
>> The value of this parameter is 3 for TLC NAND when SLC mode
>> is used as WriteBooster Buffer. 2 for MLC NAND.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
>> @@ -917,6 +1024,7 @@ Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the Maximum total WriteBooster Buffer size
>> which is supported by the entire device.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
>> @@ -924,6 +1032,7 @@ Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the maximum number of luns that can support
>> WriteBooster.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
>> @@ -937,46 +1046,59 @@ Description: The supportability of user space reduction mode
>> preserve user space type.
>> 02h: Device can be configured in either user space
>> reduction type or preserve user space type.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
>> Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: The supportability of WriteBooster Buffer type.
>> - 00h: LU based WriteBooster Buffer configuration
>> - 01h: Single shared WriteBooster Buffer
>> - configuration
>> - 02h: Supporting both LU based WriteBooster
>> - Buffer and Single shared WriteBooster Buffer
>> - configuration
>> +
>> + === ==========================================================
>> + 00h LU based WriteBooster Buffer configuration
>> + 01h Single shared WriteBooster Buffer configuration
>> + 02h Supporting both LU based WriteBooster.
>> + Buffer and Single shared WriteBooster Buffer configuration
>> + === ==========================================================
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
>> Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the status of WriteBooster.
>> - 0: WriteBooster is not enabled.
>> - 1: WriteBooster is enabled
>> +
>> + == ============================
>> + 0 WriteBooster is not enabled.
>> + 1 WriteBooster is enabled
>> + == ============================
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
>> Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows if flush is enabled.
>> - 0: Flush operation is not performed.
>> - 1: Flush operation is performed.
>> +
>> + == =================================
>> + 0 Flush operation is not performed.
>> + 1 Flush operation is performed.
>> + == =================================
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
>> Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: Flush WriteBooster Buffer during hibernate state.
>> - 0: Device is not allowed to flush the
>> - WriteBooster Buffer during link hibernate
>> - state.
>> - 1: Device is allowed to flush the
>> - WriteBooster Buffer during link hibernate
>> - state
>> +
>> + == =================================================
>> + 0 Device is not allowed to flush the
>> + WriteBooster Buffer during link hibernate state.
>> + 1 Device is allowed to flush the
>> + WriteBooster Buffer during link hibernate state.
>> + == =================================================
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
>> @@ -984,23 +1106,30 @@ Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the amount of unused WriteBooster buffer
>> available.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
>> Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the amount of unused current buffer.
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
>> Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the flush operation status.
>> - 00h: idle
>> - 01h: Flush operation in progress
>> - 02h: Flush operation stopped prematurely.
>> - 03h: Flush operation completed successfully
>> - 04h: Flush operation general failure
>> +
>> +
>> + === ======================================
>> + 00h idle
>> + 01h Flush operation in progress
>> + 02h Flush operation stopped prematurely.
>> + 03h Flush operation completed successfully
>> + 04h Flush operation general failure
>> + === ======================================
>> +
>> The file is read only.
>>
>> What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
>> @@ -1008,9 +1137,13 @@ Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows an indication of the WriteBooster Buffer
>> lifetime based on the amount of performed program/erase cycles
>> - 01h: 0% - 10% WriteBooster Buffer life time used
>> +
>> + === =============================================
>> + 01h 0% - 10% WriteBooster Buffer life time used
>> ...
>> - 0Ah: 90% - 100% WriteBooster Buffer life time used
>> + 0Ah 90% - 100% WriteBooster Buffer life time used
>> + === =============================================
>> +
>> The file is read only.
>>
>> What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
>> @@ -1018,4 +1151,5 @@ Date: June 2020
>> Contact: Asutosh Das <asutoshd@...eaurora.org>
>> Description: This entry shows the configured size of WriteBooster buffer.
>> 0400h corresponds to 4GB.
>> +
>> The file is read only.
>> diff --git a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
>> index d301e7017afe..e92aba4eb594 100644
>> --- a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
>> +++ b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
>> @@ -5,7 +5,9 @@ Contact: Jan Kandziora <jjj@....de>
>> Description: When written, this file sets the I2C speed on the connected
>> DS28E17 chip. When read, it reads the current setting from
>> the DS28E17 chip.
>> +
>> Valid values: 100, 400, 900 [kBaud].
>> +
>> Default 100, can be set by w1_ds28e17.speed= module parameter.
>> Users: w1_ds28e17 driver
>>
>> @@ -17,5 +19,6 @@ Description: When written, this file sets the multiplier used to calculate
>> the busy timeout for I2C operations on the connected DS28E17
>> chip. When read, returns the current setting.
>> Valid values: 1 to 9.
>> +
>> Default 1, can be set by w1_ds28e17.stretch= module parameter.
>> Users: w1_ds28e17 driver
>> diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
>> index e4afc2538210..b16d30a71709 100644
>> --- a/Documentation/ABI/testing/sysfs-firmware-acpi
>> +++ b/Documentation/ABI/testing/sysfs-firmware-acpi
>> @@ -81,11 +81,11 @@ Description:
>> $ cd /sys/firmware/acpi/interrupts
>> $ grep . *
>> error: 0
>> - ff_gbl_lock: 0 enable
>> - ff_pmtimer: 0 invalid
>> - ff_pwr_btn: 0 enable
>> - ff_rt_clk: 2 disable
>> - ff_slp_btn: 0 invalid
>> + ff_gbl_lock: 0 enable
>> + ff_pmtimer: 0 invalid
>> + ff_pwr_btn: 0 enable
>> + ff_rt_clk: 2 disable
>> + ff_slp_btn: 0 invalid
>> gpe00: 0 invalid
>> gpe01: 0 enable
>> gpe02: 108 enable
>> @@ -118,9 +118,9 @@ Description:
>> gpe1D: 0 invalid
>> gpe1E: 0 invalid
>> gpe1F: 0 invalid
>> - gpe_all: 1192
>> - sci: 1194
>> - sci_not: 0
>> + gpe_all: 1192
>> + sci: 1194
>> + sci_not: 0
>>
>> =========== ==================================================
>> sci The number of times the ACPI SCI
>> diff --git a/Documentation/ABI/testing/sysfs-firmware-efi-esrt b/Documentation/ABI/testing/sysfs-firmware-efi-esrt
>> index 6e431d1a4e79..31b57676d4ad 100644
>> --- a/Documentation/ABI/testing/sysfs-firmware-efi-esrt
>> +++ b/Documentation/ABI/testing/sysfs-firmware-efi-esrt
>> @@ -35,10 +35,13 @@ What: /sys/firmware/efi/esrt/entries/entry$N/fw_type
>> Date: February 2015
>> Contact: Peter Jones <pjones@...hat.com>
>> Description: What kind of firmware entry this is:
>> - 0 - Unknown
>> - 1 - System Firmware
>> - 2 - Device Firmware
>> - 3 - UEFI Driver
>> +
>> + == ===============
>> + 0 Unknown
>> + 1 System Firmware
>> + 2 Device Firmware
>> + 3 UEFI Driver
>> + == ===============
>>
>> What: /sys/firmware/efi/esrt/entries/entry$N/fw_class
>> Date: February 2015
>> @@ -71,11 +74,14 @@ Date: February 2015
>> Contact: Peter Jones <pjones@...hat.com>
>> Description: The result of the last firmware update attempt for the
>> firmware resource entry.
>> - 0 - Success
>> - 1 - Insufficient resources
>> - 2 - Incorrect version
>> - 3 - Invalid format
>> - 4 - Authentication error
>> - 5 - AC power event
>> - 6 - Battery power event
>> +
>> + == ======================
>> + 0 Success
>> + 1 Insufficient resources
>> + 2 Incorrect version
>> + 3 Invalid format
>> + 4 Authentication error
>> + 5 AC power event
>> + 6 Battery power event
>> + == ======================
>>
>> diff --git a/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map b/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
>> index c61b9b348e99..9c4d581be396 100644
>> --- a/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
>> +++ b/Documentation/ABI/testing/sysfs-firmware-efi-runtime-map
>> @@ -14,7 +14,7 @@ Description: Switching efi runtime services to virtual mode requires
>> /sys/firmware/efi/runtime-map/ is the directory the kernel
>> exports that information in.
>>
>> - subdirectories are named with the number of the memory range:
>> + subdirectories are named with the number of the memory range::
>>
>> /sys/firmware/efi/runtime-map/0
>> /sys/firmware/efi/runtime-map/1
>> @@ -24,11 +24,13 @@ Description: Switching efi runtime services to virtual mode requires
>>
>> Each subdirectory contains five files:
>>
>> - attribute : The attributes of the memory range.
>> - num_pages : The size of the memory range in pages.
>> - phys_addr : The physical address of the memory range.
>> - type : The type of the memory range.
>> - virt_addr : The virtual address of the memory range.
>> + ========= =========================================
>> + attribute The attributes of the memory range.
>> + num_pages The size of the memory range in pages.
>> + phys_addr The physical address of the memory range.
>> + type The type of the memory range.
>> + virt_addr The virtual address of the memory range.
>> + ========= =========================================
>>
>> Above values are all hexadecimal numbers with the '0x' prefix.
>> Users: Kexec
>> diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
>> index 011dda4f8e8a..ee0d6dbc810e 100644
>> --- a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
>> +++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
>> @@ -15,7 +15,7 @@ Description:
>> to the fw_cfg device can be found in "docs/specs/fw_cfg.txt"
>> in the QEMU source tree.
>>
>> - === SysFS fw_cfg Interface ===
>> + **SysFS fw_cfg Interface**
>>
>> The fw_cfg sysfs interface described in this document is only
>> intended to display discoverable blobs (i.e., those registered
>> @@ -31,7 +31,7 @@ Description:
>>
>> /sys/firmware/qemu_fw_cfg/rev
>>
>> - --- Discoverable fw_cfg blobs by selector key ---
>> + **Discoverable fw_cfg blobs by selector key**
>>
>> All discoverable blobs listed in the fw_cfg file directory are
>> displayed as entries named after their unique selector key
>> @@ -45,24 +45,26 @@ Description:
>> Each such fw_cfg sysfs entry has the following values exported
>> as attributes:
>>
>> - name : The 56-byte nul-terminated ASCII string used as the
>> + ==== ====================================================
>> + name The 56-byte nul-terminated ASCII string used as the
>> blob's 'file name' in the fw_cfg directory.
>> - size : The length of the blob, as given in the fw_cfg
>> + size The length of the blob, as given in the fw_cfg
>> directory.
>> - key : The value of the blob's selector key as given in the
>> + key The value of the blob's selector key as given in the
>> fw_cfg directory. This value is the same as used in
>> the parent directory name.
>> - raw : The raw bytes of the blob, obtained by selecting the
>> + raw The raw bytes of the blob, obtained by selecting the
>> entry via the control register, and reading a number
>> of bytes equal to the blob size from the data
>> register.
>> + ==== ====================================================
>>
>> - --- Listing fw_cfg blobs by file name ---
>> + **Listing fw_cfg blobs by file name**
>>
>> While the fw_cfg device does not impose any specific naming
>> convention on the blobs registered in the file directory,
>> QEMU developers have traditionally used path name semantics
>> - to give each blob a descriptive name. For example:
>> + to give each blob a descriptive name. For example::
>>
>> "bootorder"
>> "genroms/kvmvapic.bin"
>> @@ -81,7 +83,7 @@ Description:
>> of directories matching the path name components of fw_cfg
>> blob names, ending in symlinks to the by_key entry for each
>> "basename", as illustrated below (assume current directory is
>> - /sys/firmware):
>> + /sys/firmware)::
>>
>> qemu_fw_cfg/by_name/bootorder -> ../by_key/38
>> qemu_fw_cfg/by_name/etc/e820 -> ../../by_key/35
>> diff --git a/Documentation/ABI/testing/sysfs-firmware-sfi b/Documentation/ABI/testing/sysfs-firmware-sfi
>> index 4be7d44aeacf..5210e0f06ddb 100644
>> --- a/Documentation/ABI/testing/sysfs-firmware-sfi
>> +++ b/Documentation/ABI/testing/sysfs-firmware-sfi
>> @@ -9,7 +9,7 @@ Description:
>> http://simplefirmware.org/documentation
>>
>> While the tables are used by the kernel, user-space
>> - can observe them this way:
>> + can observe them this way::
>>
>> - # cd /sys/firmware/sfi/tables
>> - # cat $TABLENAME > $TABLENAME.bin
>> + # cd /sys/firmware/sfi/tables
>> + # cat $TABLENAME > $TABLENAME.bin
>> diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
>> index 4573fd4b7876..66800baab096 100644
>> --- a/Documentation/ABI/testing/sysfs-firmware-sgi_uv
>> +++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
>> @@ -5,7 +5,7 @@ Description:
>> The /sys/firmware/sgi_uv directory contains information
>> about the SGI UV platform.
>>
>> - Under that directory are a number of files:
>> + Under that directory are a number of files::
>>
>> partition_id
>> coherence_id
>> @@ -14,7 +14,7 @@ Description:
>> SGI UV systems can be partitioned into multiple physical
>> machines, which each partition running a unique copy
>> of the operating system. Each partition will have a unique
>> - partition id. To display the partition id, use the command:
>> + partition id. To display the partition id, use the command::
>>
>> cat /sys/firmware/sgi_uv/partition_id
>>
>> @@ -22,6 +22,6 @@ Description:
>> A partitioned SGI UV system can have one or more coherence
>> domain. The coherence id indicates which coherence domain
>> this partition is in. To display the coherence id, use the
>> - command:
>> + command::
>>
>> cat /sys/firmware/sgi_uv/coherence_id
>> diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
>> index 834d0becae6d..67b3ed8e8c2f 100644
>> --- a/Documentation/ABI/testing/sysfs-fs-f2fs
>> +++ b/Documentation/ABI/testing/sysfs-fs-f2fs
>> @@ -20,10 +20,13 @@ What: /sys/fs/f2fs/<disk>/gc_idle
>> Date: July 2013
>> Contact: "Namjae Jeon" <namjae.jeon@...sung.com>
>> Description: Controls the victim selection policy for garbage collection.
>> - Setting gc_idle = 0(default) will disable this option. Setting
>> - gc_idle = 1 will select the Cost Benefit approach & setting
>> - gc_idle = 2 will select the greedy approach & setting
>> - gc_idle = 3 will select the age-threshold based approach.
>> + Setting gc_idle = 0(default) will disable this option. Setting:
>> +
>> + =========== ===============================================
>> + gc_idle = 1 will select the Cost Benefit approach & setting
>> + gc_idle = 2 will select the greedy approach & setting
>> + gc_idle = 3 will select the age-threshold based approach.
>> + =========== ===============================================
>>
>> What: /sys/fs/f2fs/<disk>/reclaim_segments
>> Date: October 2013
>> @@ -46,10 +49,17 @@ Date: November 2013
>> Contact: "Jaegeuk Kim" <jaegeuk.kim@...sung.com>
>> Description: Controls the in-place-update policy.
>> updates in f2fs. User can set:
>> - 0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR,
>> - 0x04: F2FS_IPU_UTIL, 0x08: F2FS_IPU_SSR_UTIL,
>> - 0x10: F2FS_IPU_FSYNC, 0x20: F2FS_IPU_ASYNC,
>> - 0x40: F2FS_IPU_NOCACHE.
>> +
>> + ==== =================
>> + 0x01 F2FS_IPU_FORCE
>> + 0x02 F2FS_IPU_SSR
>> + 0x04 F2FS_IPU_UTIL
>> + 0x08 F2FS_IPU_SSR_UTIL
>> + 0x10 F2FS_IPU_FSYNC
>> + 0x20 F2FS_IPU_ASYNC,
>> + 0x40 F2FS_IPU_NOCACHE
>> + ==== =================
>> +
>> Refer segment.h for details.
>>
>> What: /sys/fs/f2fs/<disk>/min_ipu_util
>> @@ -332,18 +342,28 @@ Date: April 2020
>> Contact: "Jaegeuk Kim" <jaegeuk@...nel.org>
>> Description: Give a way to attach REQ_META|FUA to data writes
>> given temperature-based bits. Now the bits indicate:
>> - * REQ_META | REQ_FUA |
>> - * 5 | 4 | 3 | 2 | 1 | 0 |
>> - * Cold | Warm | Hot | Cold | Warm | Hot |
>> +
>> + +-------------------+-------------------+
>> + | REQ_META | REQ_FUA |
>> + +------+------+-----+------+------+-----+
>> + | 5 | 4 | 3 | 2 | 1 | 0 |
>> + +------+------+-----+------+------+-----+
>> + | Cold | Warm | Hot | Cold | Warm | Hot |
>> + +------+------+-----+------+------+-----+
>>
>> What: /sys/fs/f2fs/<disk>/node_io_flag
>> Date: June 2020
>> Contact: "Jaegeuk Kim" <jaegeuk@...nel.org>
>> Description: Give a way to attach REQ_META|FUA to node writes
>> given temperature-based bits. Now the bits indicate:
>> - * REQ_META | REQ_FUA |
>> - * 5 | 4 | 3 | 2 | 1 | 0 |
>> - * Cold | Warm | Hot | Cold | Warm | Hot |
>> +
>> + +-------------------+-------------------+
>> + | REQ_META | REQ_FUA |
>> + +------+------+-----+------+------+-----+
>> + | 5 | 4 | 3 | 2 | 1 | 0 |
>> + +------+------+-----+------+------+-----+
>> + | Cold | Warm | Hot | Cold | Warm | Hot |
>> + +------+------+-----+------+------+-----+
>>
>> What: /sys/fs/f2fs/<disk>/iostat_period_ms
>> Date: April 2020
>> diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-ksm b/Documentation/ABI/testing/sysfs-kernel-mm-ksm
>> index dfc13244cda3..1c9bed5595f5 100644
>> --- a/Documentation/ABI/testing/sysfs-kernel-mm-ksm
>> +++ b/Documentation/ABI/testing/sysfs-kernel-mm-ksm
>> @@ -34,8 +34,9 @@ Description: Kernel Samepage Merging daemon sysfs interface
>> in a tree.
>>
>> run: write 0 to disable ksm, read 0 while ksm is disabled.
>> - write 1 to run ksm, read 1 while ksm is running.
>> - write 2 to disable ksm and unmerge all its pages.
>> +
>> + - write 1 to run ksm, read 1 while ksm is running.
>> + - write 2 to disable ksm and unmerge all its pages.
>>
>> sleep_millisecs: how many milliseconds ksm should sleep between
>> scans.
>> diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
>> index ed35833ad7f0..c9f12baf8baa 100644
>> --- a/Documentation/ABI/testing/sysfs-kernel-slab
>> +++ b/Documentation/ABI/testing/sysfs-kernel-slab
>> @@ -346,6 +346,7 @@ Description:
>> number of objects per slab. If a slab cannot be allocated
>> because of fragmentation, SLUB will retry with the minimum order
>> possible depending on its characteristics.
>> +
>> When debug_guardpage_minorder=N (N > 0) parameter is specified
>> (see Documentation/admin-guide/kernel-parameters.rst), the minimum possible
>> order is used and this sysfs entry can not be used to change
>> @@ -361,6 +362,7 @@ Description:
>> new slab has not been possible at the cache's order and instead
>> fallen back to its minimum possible order. It can be written to
>> clear the current count.
>> +
>> Available when CONFIG_SLUB_STATS is enabled.
>>
>> What: /sys/kernel/slab/cache/partial
>> @@ -410,6 +412,7 @@ Description:
>> slab from a remote node as opposed to allocating a new slab on
>> the local node. This reduces the amount of wasted memory over
>> the entire system but can be expensive.
>> +
>> Available when CONFIG_NUMA is enabled.
>>
>> What: /sys/kernel/slab/cache/sanity_checks
>> diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
>> index 0aac02e7fb0e..353c0db5bc1f 100644
>> --- a/Documentation/ABI/testing/sysfs-module
>> +++ b/Documentation/ABI/testing/sysfs-module
>> @@ -17,14 +17,15 @@ KernelVersion: 3.1
>> Contact: Kirill Smelkov <kirr@....spb.ru>
>> Description: Maximum time allowed for periodic transfers per microframe (μs)
>>
>> - [ USB 2.0 sets maximum allowed time for periodic transfers per
>> + Note:
>> + USB 2.0 sets maximum allowed time for periodic transfers per
>> microframe to be 80%, that is 100 microseconds out of 125
>> microseconds (full microframe).
>>
>> However there are cases, when 80% max isochronous bandwidth is
>> too limiting. For example two video streams could require 110
>> microseconds of isochronous bandwidth per microframe to work
>> - together. ]
>> + together.
>>
>> Through this setting it is possible to raise the limit so that
>> the host controller would allow allocating more than 100
>> @@ -45,8 +46,10 @@ Date: Jan 2012
>> KernelVersion:»·3.3
>> Contact: Kay Sievers <kay.sievers@...y.org>
>> Description: Module taint flags:
>> - P - proprietary module
>> - O - out-of-tree module
>> - F - force-loaded module
>> - C - staging driver module
>> - E - unsigned module
>> + == =====================
>> + P proprietary module
>> + O out-of-tree module
>> + F force-loaded module
>> + C staging driver module
>> + E unsigned module
>> + == =====================
>> diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop
>> index 9b917c7453de..82bcfe9df66e 100644
>> --- a/Documentation/ABI/testing/sysfs-platform-dell-laptop
>> +++ b/Documentation/ABI/testing/sysfs-platform-dell-laptop
>> @@ -34,9 +34,12 @@ Description:
>> this file. To disable a trigger, write its name preceded
>> by '-' instead.
>>
>> - For example, to enable the keyboard as trigger run:
>> + For example, to enable the keyboard as trigger run::
>> +
>> echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
>> - To disable it:
>> +
>> + To disable it::
>> +
>> echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
>>
>> Note that not all the available triggers can be configured.
>> @@ -57,7 +60,8 @@ Description:
>> with any the above units. If no unit is specified, the value
>> is assumed to be expressed in seconds.
>>
>> - For example, to set the timeout to 10 minutes run:
>> + For example, to set the timeout to 10 minutes run::
>> +
>> echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
>>
>> Note that when this file is read, the returned value might be
>> diff --git a/Documentation/ABI/testing/sysfs-platform-dell-smbios b/Documentation/ABI/testing/sysfs-platform-dell-smbios
>> index 205d3b6361e0..e6e0f7f834a7 100644
>> --- a/Documentation/ABI/testing/sysfs-platform-dell-smbios
>> +++ b/Documentation/ABI/testing/sysfs-platform-dell-smbios
>> @@ -13,8 +13,8 @@ Description:
>> For example the token ID "5" would be available
>> as the following attributes:
>>
>> - 0005_location
>> - 0005_value
>> + - 0005_location
>> + - 0005_value
>>
>> Tokens will vary from machine to machine, and
>> only tokens available on that machine will be
>> diff --git a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
>> index c394b808be19..b6a138b50d99 100644
>> --- a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
>> +++ b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
>> @@ -5,9 +5,9 @@ Contact: Wolfram Sang <wsa+renesas@...g-engineering.com>
>> Description:
>> Reading the file will give you a list of masters which can be
>> selected for a demultiplexed bus. The format is
>> - "<index>:<name>". Example from a Renesas Lager board:
>> + "<index>:<name>". Example from a Renesas Lager board::
>>
>> - 0:/i2c@...00000 1:/i2c@...08000
>> + 0:/i2c@...00000 1:/i2c@...08000
>>
>> What: /sys/devices/platform/<i2c-demux-name>/current_master
>> Date: January 2016
>> diff --git a/Documentation/ABI/testing/sysfs-platform-kim b/Documentation/ABI/testing/sysfs-platform-kim
>> index c1653271872a..a7f81de68046 100644
>> --- a/Documentation/ABI/testing/sysfs-platform-kim
>> +++ b/Documentation/ABI/testing/sysfs-platform-kim
>> @@ -5,6 +5,7 @@ Contact: "Pavan Savoy" <pavan_savoy@...com>
>> Description:
>> Name of the UART device at which the WL128x chip
>> is connected. example: "/dev/ttyS0".
>> +
>> The device name flows down to architecture specific board
>> initialization file from the SFI/ATAGS bootloader
>> firmware. The name exposed is read from the user-space
>> diff --git a/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
>> index 6212697bbf6f..bc510ccc37a7 100644
>> --- a/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
>> +++ b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
>> @@ -7,9 +7,11 @@ Description:
>> The file can show/change the phy mode for role swap of usb.
>>
>> Write the following strings to change the mode:
>> - "host" - switching mode from peripheral to host.
>> - "peripheral" - switching mode from host to peripheral.
>> +
>> + - "host" - switching mode from peripheral to host.
>> + - "peripheral" - switching mode from host to peripheral.
>>
>> Read the file, then it shows the following strings:
>> - "host" - The mode is host now.
>> - "peripheral" - The mode is peripheral now.
>> +
>> + - "host" - The mode is host now.
>> + - "peripheral" - The mode is peripheral now.
>> diff --git a/Documentation/ABI/testing/sysfs-platform-renesas_usb3 b/Documentation/ABI/testing/sysfs-platform-renesas_usb3
>> index 5621c15d5dc0..8af5b9c3fabb 100644
>> --- a/Documentation/ABI/testing/sysfs-platform-renesas_usb3
>> +++ b/Documentation/ABI/testing/sysfs-platform-renesas_usb3
>> @@ -7,9 +7,11 @@ Description:
>> The file can show/change the drd mode of usb.
>>
>> Write the following string to change the mode:
>> - "host" - switching mode from peripheral to host.
>> - "peripheral" - switching mode from host to peripheral.
>> +
>> + - "host" - switching mode from peripheral to host.
>> + - "peripheral" - switching mode from host to peripheral.
>>
>> Read the file, then it shows the following strings:
>> - "host" - The mode is host now.
>> - "peripheral" - The mode is peripheral now.
>> +
>> + - "host" - The mode is host now.
>> + - "peripheral" - The mode is peripheral now.
>> diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
>> index 5e6ead29124c..51c0f578bfce 100644
>> --- a/Documentation/ABI/testing/sysfs-power
>> +++ b/Documentation/ABI/testing/sysfs-power
>> @@ -47,14 +47,18 @@ Description:
>> suspend-to-disk mechanism. Reading from this file returns
>> the name of the method by which the system will be put to
>> sleep on the next suspend. There are four methods supported:
>> +
>> 'firmware' - means that the memory image will be saved to disk
>> by some firmware, in which case we also assume that the
>> firmware will handle the system suspend.
>> +
>> 'platform' - the memory image will be saved by the kernel and
>> the system will be put to sleep by the platform driver (e.g.
>> ACPI or other PM registers).
>> +
>> 'shutdown' - the memory image will be saved by the kernel and
>> the system will be powered off.
>> +
>> 'reboot' - the memory image will be saved by the kernel and
>> the system will be rebooted.
>>
>> @@ -74,12 +78,12 @@ Description:
>> The suspend-to-disk method may be chosen by writing to this
>> file one of the accepted strings:
>>
>> - 'firmware'
>> - 'platform'
>> - 'shutdown'
>> - 'reboot'
>> - 'testproc'
>> - 'test'
>> + - 'firmware'
>> + - 'platform'
>> + - 'shutdown'
>> + - 'reboot'
>> + - 'testproc'
>> + - 'test'
>>
>> It will only change to 'firmware' or 'platform' if the system
>> supports that.
>> @@ -114,9 +118,9 @@ Description:
>> string representing a nonzero integer into it.
>>
>> To use this debugging feature you should attempt to suspend
>> - the machine, then reboot it and run
>> + the machine, then reboot it and run::
>>
>> - dmesg -s 1000000 | grep 'hash matches'
>> + dmesg -s 1000000 | grep 'hash matches'
>>
>> If you do not get any matches (or they appear to be false
>> positives), it is possible that the last PM event point
>> @@ -244,6 +248,7 @@ Description:
>> wakeup sources created with the help of /sys/power/wake_lock.
>> When a string is written to /sys/power/wake_unlock, it will be
>> assumed to represent the name of a wakeup source to deactivate.
>> +
>> If a wakeup source object of that name exists and is active at
>> the moment, it will be deactivated.
>>
>> diff --git a/Documentation/ABI/testing/sysfs-profiling b/Documentation/ABI/testing/sysfs-profiling
>> index 8a8e466eb2c0..e39dd3a0ceef 100644
>> --- a/Documentation/ABI/testing/sysfs-profiling
>> +++ b/Documentation/ABI/testing/sysfs-profiling
>> @@ -5,7 +5,7 @@ Description:
>> /sys/kernel/profiling is the runtime equivalent
>> of the boot-time profile= option.
>>
>> - You can get the same effect running:
>> + You can get the same effect running::
>>
>> echo 2 > /sys/kernel/profiling
>>
>> diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf
>> index a99c5f86a37a..2969d3694ec0 100644
>> --- a/Documentation/ABI/testing/sysfs-wusb_cbaf
>> +++ b/Documentation/ABI/testing/sysfs-wusb_cbaf
>> @@ -45,7 +45,8 @@ Description:
>> 7. Device is unplugged.
>>
>> References:
>> - [WUSB-AM] Association Models Supplement to the
>> + [WUSB-AM]
>> + Association Models Supplement to the
>> Certified Wireless Universal Serial Bus
>> Specification, version 1.0.
>>
>> diff --git a/Documentation/ABI/testing/usb-charger-uevent b/Documentation/ABI/testing/usb-charger-uevent
>> index 419a92dd0d86..1db89b0cf80f 100644
>> --- a/Documentation/ABI/testing/usb-charger-uevent
>> +++ b/Documentation/ABI/testing/usb-charger-uevent
>> @@ -3,44 +3,52 @@ Date: 2020-01-14
>> KernelVersion: 5.6
>> Contact: linux-usb@...r.kernel.org
>> Description: There are two USB charger states:
>> - USB_CHARGER_ABSENT
>> - USB_CHARGER_PRESENT
>> +
>> + - USB_CHARGER_ABSENT
>> + - USB_CHARGER_PRESENT
>> +
>> There are five USB charger types:
>> - USB_CHARGER_UNKNOWN_TYPE: Charger type is unknown
>> - USB_CHARGER_SDP_TYPE: Standard Downstream Port
>> - USB_CHARGER_CDP_TYPE: Charging Downstream Port
>> - USB_CHARGER_DCP_TYPE: Dedicated Charging Port
>> - USB_CHARGER_ACA_TYPE: Accessory Charging Adapter
>> +
>> + ======================== ==========================
>> + USB_CHARGER_UNKNOWN_TYPE Charger type is unknown
>> + USB_CHARGER_SDP_TYPE Standard Downstream Port
>> + USB_CHARGER_CDP_TYPE Charging Downstream Port
>> + USB_CHARGER_DCP_TYPE Dedicated Charging Port
>> + USB_CHARGER_ACA_TYPE Accessory Charging Adapter
>> + ======================== ==========================
>> +
>> https://www.usb.org/document-library/battery-charging-v12-spec-and-adopters-agreement
>>
>> - Here are two examples taken using udevadm monitor -p when
>> - USB charger is online:
>> - UDEV change /devices/soc0/usbphynop1 (platform)
>> - ACTION=change
>> - DEVPATH=/devices/soc0/usbphynop1
>> - DRIVER=usb_phy_generic
>> - MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv
>> - OF_COMPATIBLE_0=usb-nop-xceiv
>> - OF_COMPATIBLE_N=1
>> - OF_FULLNAME=/usbphynop1
>> - OF_NAME=usbphynop1
>> - SEQNUM=2493
>> - SUBSYSTEM=platform
>> - USB_CHARGER_STATE=USB_CHARGER_PRESENT
>> - USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE
>> - USEC_INITIALIZED=227422826
>> + Here are two examples taken using ``udevadm monitor -p`` when
>> + USB charger is online::
>>
>> - USB charger is offline:
>> - KERNEL change /devices/soc0/usbphynop1 (platform)
>> - ACTION=change
>> - DEVPATH=/devices/soc0/usbphynop1
>> - DRIVER=usb_phy_generic
>> - MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv
>> - OF_COMPATIBLE_0=usb-nop-xceiv
>> - OF_COMPATIBLE_N=1
>> - OF_FULLNAME=/usbphynop1
>> - OF_NAME=usbphynop1
>> - SEQNUM=2494
>> - SUBSYSTEM=platform
>> - USB_CHARGER_STATE=USB_CHARGER_ABSENT
>> - USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE
>> + UDEV change /devices/soc0/usbphynop1 (platform)
>> + ACTION=change
>> + DEVPATH=/devices/soc0/usbphynop1
>> + DRIVER=usb_phy_generic
>> + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv
>> + OF_COMPATIBLE_0=usb-nop-xceiv
>> + OF_COMPATIBLE_N=1
>> + OF_FULLNAME=/usbphynop1
>> + OF_NAME=usbphynop1
>> + SEQNUM=2493
>> + SUBSYSTEM=platform
>> + USB_CHARGER_STATE=USB_CHARGER_PRESENT
>> + USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE
>> + USEC_INITIALIZED=227422826
>> +
>> + USB charger is offline::
>> +
>> + KERNEL change /devices/soc0/usbphynop1 (platform)
>> + ACTION=change
>> + DEVPATH=/devices/soc0/usbphynop1
>> + DRIVER=usb_phy_generic
>> + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv
>> + OF_COMPATIBLE_0=usb-nop-xceiv
>> + OF_COMPATIBLE_N=1
>> + OF_FULLNAME=/usbphynop1
>> + OF_NAME=usbphynop1
>> + SEQNUM=2494
>> + SUBSYSTEM=platform
>> + USB_CHARGER_STATE=USB_CHARGER_ABSENT
>> + USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE
>> diff --git a/Documentation/ABI/testing/usb-uevent b/Documentation/ABI/testing/usb-uevent
>> index d35c3cad892c..2b8eca4bf2b1 100644
>> --- a/Documentation/ABI/testing/usb-uevent
>> +++ b/Documentation/ABI/testing/usb-uevent
>> @@ -6,22 +6,22 @@ Description: When the USB Host Controller has entered a state where it is no
>> longer functional a uevent will be raised. The uevent will
>> contain ACTION=offline and ERROR=DEAD.
>>
>> - Here is an example taken using udevadm monitor -p:
>> + Here is an example taken using udevadm monitor -p::
>>
>> - KERNEL[130.428945] offline /devices/pci0000:00/0000:00:10.0/usb2 (usb)
>> - ACTION=offline
>> - BUSNUM=002
>> - DEVNAME=/dev/bus/usb/002/001
>> - DEVNUM=001
>> - DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2
>> - DEVTYPE=usb_device
>> - DRIVER=usb
>> - ERROR=DEAD
>> - MAJOR=189
>> - MINOR=128
>> - PRODUCT=1d6b/2/414
>> - SEQNUM=2168
>> - SUBSYSTEM=usb
>> - TYPE=9/0/1
>> + KERNEL[130.428945] offline /devices/pci0000:00/0000:00:10.0/usb2 (usb)
>> + ACTION=offline
>> + BUSNUM=002
>> + DEVNAME=/dev/bus/usb/002/001
>> + DEVNUM=001
>> + DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2
>> + DEVTYPE=usb_device
>> + DRIVER=usb
>> + ERROR=DEAD
>> + MAJOR=189
>> + MINOR=128
>> + PRODUCT=1d6b/2/414
>> + SEQNUM=2168
>> + SUBSYSTEM=usb
>> + TYPE=9/0/1
>>
>> Users: chromium-os-dev@...omium.org
>> diff --git a/scripts/get_abi.pl b/scripts/get_abi.pl
>> index 413349789145..bdef3e5c35c7 100755
>> --- a/scripts/get_abi.pl
>> +++ b/scripts/get_abi.pl
>> @@ -316,8 +316,6 @@ sub output_rest {
>> $len = length($name) if (length($name) > $len);
>> }
>>
>> - print "What:\n\n";
>> -
>> print "+-" . "-" x $len . "-+\n";
>> foreach my $name (@names) {
>> printf "| %s", $name . " " x ($len - length($name)) . " |\n";
>
Powered by blists - more mailing lists