lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20201102194927.868-1-ogabbay@kernel.org>
Date:   Mon,  2 Nov 2020 21:49:27 +0200
From:   Oded Gabbay <ogabbay@...nel.org>
To:     linux-kernel@...r.kernel.org
Cc:     SW_Drivers@...ana.ai
Subject: [PATCH] habanalabs: support multiple types of firmwares

The driver now loads the firmware in two stages. For debugging purposes
we need to support situations where only the first stage firmware is
loaded.

Therefore, use a bitmask to determine which F/W is loaded

Signed-off-by: Oded Gabbay <ogabbay@...nel.org>
---
 drivers/misc/habanalabs/common/firmware_if.c    |  9 +++++++--
 drivers/misc/habanalabs/common/habanalabs.h     | 14 +++++++++++++-
 drivers/misc/habanalabs/common/habanalabs_drv.c |  1 +
 3 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index cd41c7ceb0e7..1340afa8ce3b 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -574,6 +574,9 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
 	u32 status;
 	int rc;
 
+	if (!(hdev->fw_loading & FW_TYPE_BOOT_CPU))
+		return 0;
+
 	dev_info(hdev->dev, "Going to wait for device boot (up to %lds)\n",
 		cpu_timeout / USEC_PER_SEC);
 
@@ -631,6 +634,8 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
 		10000,
 		cpu_timeout);
 
+	dev_dbg(hdev->dev, "uboot status = %d\n", status);
+
 	/* Read U-Boot version now in case we will later fail */
 	hdev->asic_funcs->read_device_fw_version(hdev, FW_COMP_UBOOT);
 
@@ -640,8 +645,8 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
 		goto out;
 	}
 
-	if (!hdev->fw_loading) {
-		dev_info(hdev->dev, "Skip loading FW\n");
+	if (!(hdev->fw_loading & FW_TYPE_LINUX)) {
+		dev_info(hdev->dev, "Skip loading Linux F/W\n");
 		goto out;
 	}
 
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index d7cf833a20bc..d12f11bdaacf 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -124,6 +124,18 @@ enum hl_fw_component {
 	FW_COMP_PREBOOT
 };
 
+/**
+ * enum hl_fw_types - F/W types to load
+ * @FW_TYPE_LINUX: Linux image for device CPU
+ * @FW_TYPE_BOOT_CPU: Boot image for device CPU
+ * @FW_TYPE_ALL_TYPES: Mask for all types
+ */
+enum hl_fw_types {
+	FW_TYPE_LINUX = 0x1,
+	FW_TYPE_BOOT_CPU = 0x2,
+	FW_TYPE_ALL_TYPES = (FW_TYPE_LINUX | FW_TYPE_BOOT_CPU)
+};
+
 /**
  * enum hl_queue_type - Supported QUEUE types.
  * @QUEUE_TYPE_NA: queue is not available.
@@ -1709,12 +1721,12 @@ struct hl_device {
 	u8				supports_cb_mapping;
 
 	/* Parameters for bring-up */
+	u64				fw_loading;
 	u8				mmu_enable;
 	u8				mmu_huge_page_opt;
 	u8				cpu_enable;
 	u8				reset_pcilink;
 	u8				cpu_queues_enable;
-	u8				fw_loading;
 	u8				pldm;
 	u8				axi_drain;
 	u8				sram_scrambler_enable;
diff --git a/drivers/misc/habanalabs/common/habanalabs_drv.c b/drivers/misc/habanalabs/common/habanalabs_drv.c
index f9067d3ef437..4c49d6cefa98 100644
--- a/drivers/misc/habanalabs/common/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/common/habanalabs_drv.c
@@ -241,6 +241,7 @@ static void set_driver_behavior_per_device(struct hl_device *hdev)
 	hdev->dram_scrambler_enable = 1;
 	hdev->bmc_enable = 1;
 	hdev->hard_reset_on_fw_events = 1;
+	hdev->fw_loading = FW_TYPE_ALL_TYPES;
 }
 
 /*
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ