linux-kernel - [PATCH v5 3/4] ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1604511132-4014-4-git-send-email-hugues.fruchet@st.com>
Date:   Wed, 4 Nov 2020 18:32:11 +0100
From:   Hugues Fruchet <hugues.fruchet@...com>
To:     Alexandre Torgue <alexandre.torgue@...com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Hans Verkuil <hverkuil@...all.nl>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Rob Herring <robh+dt@...nel.org>
CC:     <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-media@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        Hugues Fruchet <hugues.fruchet@...com>,
        Alain Volmat <alain.volmat@...com>,
        Yannick Fertre <yannick.fertre@...com>,
        Philippe CORNU <philippe.cornu@...com>
Subject: [PATCH v5 3/4] ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board

Explicitly set bus-type to parallel mode in DCMI endpoint (bus-type=5).

Signed-off-by: Hugues Fruchet <hugues.fruchet@...com>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 85628e1..6cc5d2a 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -90,6 +90,7 @@
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov5640_0>;
+			bus-type = <5>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;
-- 
2.7.4