linux-kernel - [PATCH V2 4/5] arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 11 Nov 2020 19:49:28 -0600
From:   Nishanth Menon <nm@...com>
To:     Roger Quadros <rogerq@...com>, Keerthy <j-keerthy@...com>,
        Jyri Sarha <jsarha@...com>,
        Tomi Valkeinen <tomi.valkeinen@...com>,
        Peter Ujfalusi <peter.ujfalusi@...com>,
        Lokesh Vutla <lokeshvutla@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Tony Lindgren <tony@...mide.com>, Tero Kristo <t-kristo@...com>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Nishanth Menon <nm@...com>
Subject: [PATCH V2 4/5] arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB

The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the board dts.

Fixes: 7e7e7dd51d06 ("arm64: dts: ti: k3-am654-base-board: enable USB1")
Signed-off-by: Nishanth Menon <nm@...com>
Cc: Roger Quadros <rogerq@...com>
---
Changes since v1:
- no change.

v1: https://lore.kernel.org/linux-arm-kernel/20201104224356.18040-5-nm@ti.com/

 arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 199c4d4e7539..744efcbb4f7f 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -325,14 +325,6 @@ &sdhci1 {
 	disable-wp;
 };
 
-&dwc3_1 {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins_default>;
-- 
2.29.2