linux-kernel - [PATCH v5 08/11] clk: at91: sama7g5: decrease lower limit for MCK0 rate

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1605796707-8378-9-git-send-email-claudiu.beznea@microchip.com>
Date:   Thu, 19 Nov 2020 16:38:24 +0200
From:   Claudiu Beznea <claudiu.beznea@...rochip.com>
To:     <mturquette@...libre.com>, <sboyd@...nel.org>,
        <nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
        <ludovic.desroches@...rochip.com>, <robh+dt@...nel.org>
CC:     <linux-clk@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: [PATCH v5 08/11] clk: at91: sama7g5: decrease lower limit for MCK0 rate

On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and
CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is
also changed by DVFS to avoid over/under clocking of MCK0 consumers.
The lower limit is changed to be able to set MCK0 accordingly by
DVFS.

Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---
 drivers/clk/at91/sama7g5.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 335e9c943c65..29d9781e6712 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -807,7 +807,7 @@ static const struct clk_pll_characteristics pll_characteristics = {
 
 /* MCK0 characteristics. */
 static const struct clk_master_characteristics mck0_characteristics = {
-	.output = { .min = 140000000, .max = 200000000 },
+	.output = { .min = 50000000, .max = 200000000 },
 	.divisors = { 1, 2, 4, 3, 5 },
 	.have_div3_pres = 1,
 };
-- 
2.7.4