| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1605796707-8378-10-git-send-email-claudiu.beznea@microchip.com>
Date: Thu, 19 Nov 2020 16:38:25 +0200
From: Claudiu Beznea <claudiu.beznea@...rochip.com>
To: <mturquette@...libre.com>, <sboyd@...nel.org>,
<nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<ludovic.desroches@...rochip.com>, <robh+dt@...nel.org>
CC: <linux-clk@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: [PATCH v5 09/11] clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher
than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at
1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS.
Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---
drivers/clk/at91/sama7g5.c | 61 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 47 insertions(+), 14 deletions(-)
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 29d9781e6712..e0c4d2eb9f59 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -89,11 +89,40 @@ static const struct clk_pll_layout pll_layout_divio = {
.endiv_shift = 30,
};
+/*
+ * CPU PLL output range.
+ * Notice: The upper limit has been setup to 1000000002 due to hardware
+ * block which cannot output exactly 1GHz.
+ */
+static const struct clk_range cpu_pll_outputs[] = {
+ { .min = 2343750, .max = 1000000002 },
+};
+
+/* PLL output range. */
+static const struct clk_range pll_outputs[] = {
+ { .min = 2343750, .max = 1200000000 },
+};
+
+/* CPU PLL characteristics. */
+static const struct clk_pll_characteristics cpu_pll_characteristics = {
+ .input = { .min = 12000000, .max = 50000000 },
+ .num_output = ARRAY_SIZE(cpu_pll_outputs),
+ .output = cpu_pll_outputs,
+};
+
+/* PLL characteristics. */
+static const struct clk_pll_characteristics pll_characteristics = {
+ .input = { .min = 12000000, .max = 50000000 },
+ .num_output = ARRAY_SIZE(pll_outputs),
+ .output = pll_outputs,
+};
+
/**
* PLL clocks description
* @n: clock name
* @p: clock parent
* @l: clock layout
+ * @c: clock characteristics
* @t: clock type
* @f: clock flags
* @eid: export index in sama7g5->chws[] array
@@ -102,6 +131,7 @@ static const struct {
const char *n;
const char *p;
const struct clk_pll_layout *l;
+ const struct clk_pll_characteristics *c;
unsigned long f;
u8 t;
u8 eid;
@@ -110,6 +140,7 @@ static const struct {
{ .n = "cpupll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &cpu_pll_characteristics,
.t = PLL_TYPE_FRAC,
/*
* This feeds cpupll_divpmcck which feeds CPU. It should
@@ -120,6 +151,7 @@ static const struct {
{ .n = "cpupll_divpmcck",
.p = "cpupll_fracck",
.l = &pll_layout_divpmc,
+ .c = &cpu_pll_characteristics,
.t = PLL_TYPE_DIV,
/* This feeds CPU. It should not be disabled. */
.f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
@@ -130,6 +162,7 @@ static const struct {
{ .n = "syspll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
/*
* This feeds syspll_divpmcck which may feed critial parts
@@ -141,6 +174,7 @@ static const struct {
{ .n = "syspll_divpmcck",
.p = "syspll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
/*
* This may feed critial parts of the systems like timers.
@@ -154,6 +188,7 @@ static const struct {
{ .n = "ddrpll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
/*
* This feeds ddrpll_divpmcck which feeds DDR. It should not
@@ -164,6 +199,7 @@ static const struct {
{ .n = "ddrpll_divpmcck",
.p = "ddrpll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
/* This feeds DDR. It should not be disabled. */
.f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
@@ -173,12 +209,14 @@ static const struct {
{ .n = "imgpll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
.f = CLK_SET_RATE_GATE, },
{ .n = "imgpll_divpmcck",
.p = "imgpll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT, },
@@ -188,12 +226,14 @@ static const struct {
{ .n = "baudpll_fracck",
.p = "mainck",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
.f = CLK_SET_RATE_GATE, },
{ .n = "baudpll_divpmcck",
.p = "baudpll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT, },
@@ -203,12 +243,14 @@ static const struct {
{ .n = "audiopll_fracck",
.p = "main_xtal",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
.f = CLK_SET_RATE_GATE, },
{ .n = "audiopll_divpmcck",
.p = "audiopll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT,
@@ -217,6 +259,7 @@ static const struct {
{ .n = "audiopll_diviock",
.p = "audiopll_fracck",
.l = &pll_layout_divio,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT,
@@ -227,12 +270,14 @@ static const struct {
{ .n = "ethpll_fracck",
.p = "main_xtal",
.l = &pll_layout_frac,
+ .c = &pll_characteristics,
.t = PLL_TYPE_FRAC,
.f = CLK_SET_RATE_GATE, },
{ .n = "ethpll_divpmcck",
.p = "ethpll_fracck",
.l = &pll_layout_divpmc,
+ .c = &pll_characteristics,
.t = PLL_TYPE_DIV,
.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT, },
@@ -793,18 +838,6 @@ static const struct {
.pp_chg_id = INT_MIN, },
};
-/* PLL output range. */
-static const struct clk_range pll_outputs[] = {
- { .min = 2343750, .max = 1200000000 },
-};
-
-/* PLL characteristics. */
-static const struct clk_pll_characteristics pll_characteristics = {
- .input = { .min = 12000000, .max = 50000000 },
- .num_output = ARRAY_SIZE(pll_outputs),
- .output = pll_outputs,
-};
-
/* MCK0 characteristics. */
static const struct clk_master_characteristics mck0_characteristics = {
.output = { .min = 50000000, .max = 200000000 },
@@ -921,7 +954,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
hw = sam9x60_clk_register_frac_pll(regmap,
&pmc_pll_lock, sama7g5_plls[i][j].n,
sama7g5_plls[i][j].p, parent_hw, i,
- &pll_characteristics,
+ sama7g5_plls[i][j].c,
sama7g5_plls[i][j].l,
sama7g5_plls[i][j].f);
break;
@@ -930,7 +963,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
hw = sam9x60_clk_register_div_pll(regmap,
&pmc_pll_lock, sama7g5_plls[i][j].n,
sama7g5_plls[i][j].p, i,
- &pll_characteristics,
+ sama7g5_plls[i][j].c,
sama7g5_plls[i][j].l,
sama7g5_plls[i][j].f);
break;
--
2.7.4
Powered by blists - more mailing lists