| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 02 Dec 2020 21:07:19 +0000
From: Timon Baetz <timon.baetz@...tonmail.com>
To: Sebastian Reichel <sre@...nel.org>
Cc: Chanwoo Choi <cw00.choi@...sung.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Kukjin Kim <kgene@...nel.org>,
Rob Herring <robh+dt@...nel.org>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
Timon Baetz <timon.baetz@...tonmail.com>
Subject: [PATCH 2/3] power: supply: max8997_charger: Set CHARGER current limit
Register for extcon notification and set charging current depending on
the detected cable type. Current values are taken from i9100 kernel
fork.
Enable and disable the CHARGER regulator based on extcon events and
remove regulator-always-on from the device tree.
Signed-off-by: Timon Baetz <timon.baetz@...tonmail.com>
---
arch/arm/boot/dts/exynos4210-i9100.dts | 1 -
drivers/power/supply/max8997_charger.c | 92 ++++++++++++++++++++++++++
2 files changed, 92 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 6d0c04d77a39..9f8d927e0d21 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -560,7 +560,6 @@ charger_reg: CHARGER {
regulator-name = "CHARGER";
regulator-min-microamp = <60000>;
regulator-max-microamp = <2580000>;
- regulator-always-on;
};
chargercv_reg: CHARGER_CV {
diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c
index 1947af25879a..26cd271576ec 100644
--- a/drivers/power/supply/max8997_charger.c
+++ b/drivers/power/supply/max8997_charger.c
@@ -6,6 +6,7 @@
// MyungJoo Ham <myungjoo.ham@...sung.com>
#include <linux/err.h>
+#include <linux/extcon.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
@@ -31,6 +32,12 @@ struct charger_data {
struct device *dev;
struct max8997_dev *iodev;
struct power_supply *battery;
+ struct regulator *reg;
+ struct {
+ struct extcon_dev *edev;
+ struct notifier_block nb;
+ struct work_struct work;
+ } extcon;
};
static enum power_supply_property max8997_battery_props[] = {
@@ -88,6 +95,63 @@ static int max8997_battery_get_property(struct power_supply *psy,
return 0;
}
+static void max8997_battery_extcon_evt_stop_work(void *data)
+{
+ struct charger_data *charger = data;
+
+ cancel_work_sync(&charger->extcon.work);
+}
+
+static void max8997_battery_extcon_evt_worker(struct work_struct *work)
+{
+ struct charger_data *charger =
+ container_of(work, struct charger_data, extcon.work);
+ int ret, current_limit;
+ struct extcon_dev *edev = charger->extcon.edev;
+
+ if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
+ dev_dbg(charger->dev, "USB SDP charger is connected\n");
+ current_limit = 450000;
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
+ dev_dbg(charger->dev, "USB DCP charger is connected\n");
+ current_limit = 650000;
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) {
+ dev_dbg(charger->dev, "USB FAST charger is connected\n");
+ current_limit = 650000;
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) {
+ dev_dbg(charger->dev, "USB SLOW charger is connected\n");
+ current_limit = 650000;
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
+ dev_dbg(charger->dev, "USB CDP charger is connected\n");
+ current_limit = 650000;
+ } else {
+ dev_dbg(charger->dev, "USB charger is diconnected\n");
+ current_limit = -1;
+ }
+
+ if (current_limit > 0) {
+ ret = regulator_set_current_limit(charger->reg, current_limit, current_limit);
+ if (ret)
+ dev_err(charger->dev, "failed to set current limit: %d\n", ret);
+ ret = regulator_enable(charger->reg);
+ if (ret)
+ dev_err(charger->dev, "failed to enable regulator: %d\n", ret);
+ } else {
+ ret = regulator_disable(charger->reg);
+ if (ret)
+ dev_err(charger->dev, "failed to disable regulator: %d\n", ret);
+ }
+}
+
+static int max8997_battery_extcon_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct charger_data *charger =
+ container_of(nb, struct charger_data, extcon.nb);
+ schedule_work(&charger->extcon.work);
+ return NOTIFY_OK;
+}
+
static const struct power_supply_desc max8997_battery_desc = {
.name = "max8997_pmic",
.type = POWER_SUPPLY_TYPE_BATTERY,
@@ -104,6 +168,7 @@ static int max8997_battery_probe(struct platform_device *pdev)
struct i2c_client *i2c = iodev->i2c;
struct max8997_platform_data *pdata = iodev->pdata;
struct power_supply_config psy_cfg = {};
+ struct extcon_dev *edev;
if (!pdata) {
dev_err(&pdev->dev, "No platform data supplied.\n");
@@ -151,6 +216,12 @@ static int max8997_battery_probe(struct platform_device *pdev)
return ret;
}
+ edev = extcon_get_extcon_dev("max8997-muic");
+ if (edev == NULL) {
+ dev_info(&pdev->dev, "extcon is not ready, probe deferred\n");
+ return -EPROBE_DEFER;
+ }
+
charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
if (!charger)
return -ENOMEM;
@@ -170,6 +241,27 @@ static int max8997_battery_probe(struct platform_device *pdev)
return PTR_ERR(charger->battery);
}
+ charger->reg = regulator_get(&pdev->dev, "CHARGER");
+ if (IS_ERR(charger->reg)) {
+ dev_err(&pdev->dev, "couldn't get CHARGER regulator\n");
+ return PTR_ERR(charger->reg);
+ }
+
+ INIT_WORK(&charger->extcon.work, max8997_battery_extcon_evt_worker);
+ ret = devm_add_action(&pdev->dev, max8997_battery_extcon_evt_stop_work, charger);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add extcon evt stop action: %d\n", ret);
+ return ret;
+ }
+ charger->extcon.edev = edev;
+ charger->extcon.nb.notifier_call = max8997_battery_extcon_evt;
+ ret = devm_extcon_register_notifier_all(&pdev->dev, charger->extcon.edev,
+ &charger->extcon.nb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register extcon notifier\n");
+ return ret;
+ };
+
return 0;
}
--
2.25.1
Powered by blists - more mailing lists