[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201202063612.21241-1-troy_lee@aspeedtech.com>
Date: Wed, 2 Dec 2020 14:36:09 +0800
From: Troy Lee <troy_lee@...eedtech.com>
To: Stefan Schaeckeler <sschaeck@...co.com>,
Rob Herring <robh+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
"Borislav Petkov" <bp@...en8.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Tony Luck <tony.luck@...el.com>,
James Morse <james.morse@....com>,
Robert Richter <rrichter@...vell.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@...ts.ozlabs.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:EDAC-CORE" <linux-edac@...r.kernel.org>
CC: <leetroy@...il.com>, <troy_lee@...eedtech.com>,
<ryan_chen@...eedtech.com>
Subject: [PATCH v2 1/3] dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support
Adding Aspeed AST2400 and AST2600 binding for edac driver.
Signed-off-by: Troy Lee <troy_lee@...eedtech.com>
---
.../devicetree/bindings/edac/aspeed-sdram-edac.txt | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
index 6a0f3d90d682..8ca9e0a049d8 100644
--- a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
@@ -1,6 +1,6 @@
-Aspeed AST2500 SoC EDAC node
+Aspeed BMC SoC EDAC node
-The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error
+The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
correction check).
The memory controller supports SECDED (single bit error correction, double bit
@@ -11,7 +11,10 @@ Note, the bootloader must configure ECC mode in the memory controller.
Required properties:
-- compatible: should be "aspeed,ast2500-sdram-edac"
+- compatible: should be one of
+ - "aspeed,ast2400-sdram-edac"
+ - "aspeed,ast2500-sdram-edac"
+ - "aspeed,ast2600-sdram-edac"
- reg: sdram controller register set should be <0x1e6e0000 0x174>
- interrupts: should be AVIC interrupt #0
--
2.17.1
Powered by blists - more mailing lists