| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201202103851.GC852@paasikivi.fi.intel.com>
Date: Wed, 2 Dec 2020 12:38:51 +0200
From: Sakari Ailus <sakari.ailus@...ux.intel.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Dan Scally <djrscally@...il.com>, linux-kernel@...r.kernel.org,
linux-acpi@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-i2c@...r.kernel.org, linux-media@...r.kernel.org,
devel@...ica.org, rjw@...ysocki.net, lenb@...nel.org,
gregkh@...uxfoundation.org, mika.westerberg@...ux.intel.com,
andriy.shevchenko@...ux.intel.com, linus.walleij@...aro.org,
bgolaszewski@...libre.com, wsa@...nel.org, yong.zhi@...el.com,
bingbu.cao@...el.com, tian.shu.qiu@...el.com, mchehab@...nel.org,
robert.moore@...el.com, erik.kaneda@...el.com, pmladek@...e.com,
rostedt@...dmis.org, sergey.senozhatsky@...il.com,
linux@...musvillemoes.dk, kieran.bingham+renesas@...asonboard.com,
jacopo+renesas@...ndi.org,
laurent.pinchart+renesas@...asonboard.com,
jorhand@...ux.microsoft.com, kitakar@...il.com,
heikki.krogerus@...ux.intel.com
Subject: Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing
software_node connections to sensors on platforms designed for Windows
Hi Laurent,
On Wed, Dec 02, 2020 at 12:30:53AM +0200, Laurent Pinchart wrote:
> Hi Daniel,
>
> On Tue, Dec 01, 2020 at 10:08:25PM +0000, Dan Scally wrote:
> > On 30/11/2020 17:09, Laurent Pinchart wrote:
> > > On Mon, Nov 30, 2020 at 01:31:24PM +0000, Daniel Scally wrote:
> > >> Currently on platforms designed for Windows, connections between CIO2 and
> > >> sensors are not properly defined in DSDT. This patch extends the ipu3-cio2
> > >> driver to compensate by building software_node connections, parsing the
> > >> connection properties from the sensor's SSDB buffer.
> > >>
> > >> Suggested-by: Jordan Hand <jorhand@...ux.microsoft.com>
> > >> Signed-off-by: Daniel Scally <djrscally@...il.com>
> > >> ---
> > >> Changes since RFC v3:
> > >>
> > >> - Removed almost all global variables, dynamically allocated
> > >> the cio2_bridge structure, plus a bunch of associated changes
> > >> like
> > >> - Added a new function to ipu3-cio2-main.c to check for an
> > >> existing fwnode_graph before calling cio2_bridge_init()
> > >> - Prefixed cio2_bridge_ to any variables and functions that
> > >> lacked it
> > >> - Assigned the new fwnode directly to the sensor's ACPI device
> > >> fwnode as secondary. This removes the requirement to delay until
> > >> the I2C devices are instantiated before ipu3-cio2 can probe, but
> > >> it has a side effect, which is that those devices then grab a ref
> > >> to the new software_node. This effectively prevents us from
> > >> unloading the driver, because we can't free the memory that they
> > >> live in whilst the device holds a reference to them. The work
> > >> around at the moment is to _not_ unregister the software_nodes
> > >> when ipu3-cio2 is unloaded; this becomes a one-time 'patch', that
> > >> is simply skipped if the module is reloaded.
> > >> - Moved the sensor's SSDB struct to be a member of cio2_sensor
> > >> - Replaced ints with unsigned ints where appropriate
> > >> - Iterated over all ACPI devices of a matching _HID rather than
> > >> just the first to ensure we handle a device with multiple sensors
> > >> of the same model.
> > >>
> > >> MAINTAINERS | 1 +
> > >> drivers/media/pci/intel/ipu3/Kconfig | 18 ++
> > >> drivers/media/pci/intel/ipu3/Makefile | 1 +
> > >> drivers/media/pci/intel/ipu3/cio2-bridge.c | 260 ++++++++++++++++++
> > >> drivers/media/pci/intel/ipu3/cio2-bridge.h | 108 ++++++++
> > >> drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 27 ++
> > >> drivers/media/pci/intel/ipu3/ipu3-cio2.h | 6 +
> > >> 7 files changed, 421 insertions(+)
> > >> create mode 100644 drivers/media/pci/intel/ipu3/cio2-bridge.c
> > >> create mode 100644 drivers/media/pci/intel/ipu3/cio2-bridge.h
> > >>
> > >> diff --git a/MAINTAINERS b/MAINTAINERS
> > >> index 9702b886d6a4..188559a0a610 100644
> > >> --- a/MAINTAINERS
> > >> +++ b/MAINTAINERS
> > >> @@ -8927,6 +8927,7 @@ INTEL IPU3 CSI-2 CIO2 DRIVER
> > >> M: Yong Zhi <yong.zhi@...el.com>
> > >> M: Sakari Ailus <sakari.ailus@...ux.intel.com>
> > >> M: Bingbu Cao <bingbu.cao@...el.com>
> > >> +M: Dan Scally <djrscally@...il.com>
> > >> R: Tianshu Qiu <tian.shu.qiu@...el.com>
> > >> L: linux-media@...r.kernel.org
> > >> S: Maintained
> > >> diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig
> > >> index 82d7f17e6a02..2b3350d042be 100644
> > >> --- a/drivers/media/pci/intel/ipu3/Kconfig
> > >> +++ b/drivers/media/pci/intel/ipu3/Kconfig
> > >> @@ -16,3 +16,21 @@ config VIDEO_IPU3_CIO2
> > >> Say Y or M here if you have a Skylake/Kaby Lake SoC with MIPI CSI-2
> > >> connected camera.
> > >> The module will be called ipu3-cio2.
> > >> +
> > >> +config CIO2_BRIDGE
> > >> + bool "IPU3 CIO2 Sensors Bridge"
> > >> + depends on VIDEO_IPU3_CIO2
> > >> + help
> > >> + This extension provides an API for the ipu3-cio2 driver to create
> > >> + connections to cameras that are hidden in SSDB buffer in ACPI. It
> > >> + can be used to enable support for cameras in detachable / hybrid
> > >> + devices that ship with Windows.
> > >> +
> > >> + Say Y here if your device is a detachable / hybrid laptop that comes
> > >> + with Windows installed by the OEM, for example:
> > >> +
> > >> + - Microsoft Surface models (except Surface Pro 3)
> > >> + - The Lenovo Miix line (for example the 510, 520, 710 and 720)
> > >> + - Dell 7285
> > >> +
> > >> + If in doubt, say N here.
> > >> diff --git a/drivers/media/pci/intel/ipu3/Makefile b/drivers/media/pci/intel/ipu3/Makefile
> > >> index 429d516452e4..933777e6ea8a 100644
> > >> --- a/drivers/media/pci/intel/ipu3/Makefile
> > >> +++ b/drivers/media/pci/intel/ipu3/Makefile
> > >> @@ -2,3 +2,4 @@
> > >> obj-$(CONFIG_VIDEO_IPU3_CIO2) += ipu3-cio2.o
> > >>
> > >> ipu3-cio2-y += ipu3-cio2-main.o
> > >> +ipu3-cio2-$(CONFIG_CIO2_BRIDGE) += cio2-bridge.o
> > >> diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c
> > >> new file mode 100644
> > >> index 000000000000..fd3f8ba07274
> > >> --- /dev/null
> > >> +++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c
> > >> @@ -0,0 +1,260 @@
> > >> +// SPDX-License-Identifier: GPL-2.0
> > >> +/* Author: Dan Scally <djrscally@...il.com> */
> > >
> > > Could you please add a blank line here ?
> >
> > Yes
> >
> > >> +#include <linux/acpi.h>
> > >> +#include <linux/device.h>
> > >> +#include <linux/i2c.h>
> > >
> > > Is this header needed ?
> > >
> > >> +#include <linux/kernel.h>
> > >> +#include <linux/module.h>
> > >
> > > And this one ?
> > >
> > >> +#include <linux/pci.h>
> > >> +#include <linux/property.h>
> > >> +#include <media/v4l2-subdev.h>
> > >
> > > And this one ?
> >
> > Ah yes - bit sloppy, they're orphaned from earlier versions, sorry about
> > that.
> >
> > >> +
> > >> +#include "cio2-bridge.h"
> > >> +
> > >> +/*
> > >> + * Extend this array with ACPI Hardware ID's of devices known to be working.
> > >> + * Do not add a HID for a sensor that is not actually supported.
> > >> + */
> > >> +static const char * const cio2_supported_devices[] = {
> > >
> > > Maybe cio2_supported_sensors ?
> >
> > Sure
> >
> > >> + "INT33BE",
> > >> + "OVTI2680",
> > >> +};
> > >> +
> > >> +static int cio2_bridge_read_acpi_buffer(struct acpi_device *adev, char *id,
> > >> + void *data, u32 size)
> > >> +{
> > >> + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> > >> + union acpi_object *obj;
> > >> + acpi_status status;
> > >> + int ret;
> > >> +
> > >> + status = acpi_evaluate_object(adev->handle, id, NULL, &buffer);
> > >> + if (ACPI_FAILURE(status))
> > >> + return -ENODEV;
> > >> +
> > >> + obj = buffer.pointer;
> > >> + if (!obj) {
> > >> + dev_err(&adev->dev, "Couldn't locate ACPI buffer\n");
> > >> + return -ENODEV;
> > >> + }
> > >> +
> > >> + if (obj->type != ACPI_TYPE_BUFFER) {
> > >> + dev_err(&adev->dev, "Not an ACPI buffer\n");
> > >> + ret = -ENODEV;
> > >> + goto out_free_buff;
> > >> + }
> > >> +
> > >> + if (obj->buffer.length > size) {
> > >> + dev_err(&adev->dev, "Given buffer is too small\n");
> > >> + ret = -EINVAL;
> > >> + goto out_free_buff;
> > >> + }
> > >> +
> > >> + memcpy(data, obj->buffer.pointer, obj->buffer.length);
> > >> + ret = obj->buffer.length;
> > >> +
> > >> +out_free_buff:
> > >> + kfree(buffer.pointer);
> > >> + return ret;
> > >> +}
> > >> +
> > >> +static void cio2_bridge_init_property_names(struct cio2_sensor *sensor)
> > >> +{
> > >> + strcpy(sensor->prop_names.clock_frequency, "clock-frequency");
> > >> + strcpy(sensor->prop_names.rotation, "rotation");
> > >> + strcpy(sensor->prop_names.bus_type, "bus-type");
> > >> + strcpy(sensor->prop_names.data_lanes, "data-lanes");
> > >> + strcpy(sensor->prop_names.remote_endpoint, "remote-endpoint");
> > >
> > > This is a bit fragile, as there's no len check. How about the following
> > > ?
> > > static const struct cio2_property_names prop_names = {
> > > .clock_frequency = "clock-frequency",
> > > .rotation = "rotation",
> > > .bus_type = "bus-type",
> > > .data_lanes = "data-lanes",
> > > .remote_endpoint = "remote-endpoint",
> > > };
> > >
> > > static void cio2_bridge_init_property_names(struct cio2_sensor *sensor)
> > > {
> > > sensor->prop_names = prop_names;
> > > }
> > >
> > > This shoudl generate a compilation warning if the string is too long.
> > >
> > > You could even inline that line in
> > > cio2_bridge_create_fwnode_properties().
> >
> > Yes, I like that, thanks - I'll make the change.
> >
> > >> +}
> > >> +
> > >> +static void cio2_bridge_create_fwnode_properties(struct cio2_sensor *sensor)
> > >> +{
> > >> + unsigned int i;
> > >> +
> > >> + cio2_bridge_init_property_names(sensor);
> > >> +
> > >> + for (i = 0; i < 4; i++)
> > >> + sensor->data_lanes[i] = i + 1;
> > >
> > > Is there no provision in the SSDB for data lane remapping ?
> >
> > Sorry; don't follow what you mean by data lane remapping here.
>
> Some CSI-2 receivers can remap data lanes. The routing inside the SoC
> from the data lane input pins to the PHYs is configurable. This makes
> board design easier as you can route the data lanes to any of the
> inputs. That's why the data lanes DT property is a list of lane numbers
> instead of a number of lanes. I'm actually not sure if the CIO2 supports
> this.
To my knowledge it does not. Only the number of lanes allocated to
different ports matters.
...
> > >> @@ -0,0 +1,108 @@
> > >> +/* SPDX-License-Identifier: GPL-2.0 */
> > >> +/* Author: Dan Scally <djrscally@...il.com> */
> > >> +#ifndef __CIO2_BRIDGE_H
> > >> +#define __CIO2_BRIDGE_H
> > >> +
> > >> +#include <linux/property.h>
> > >> +
> > >> +#define CIO2_HID "INT343E"
> > >> +#define CIO2_NUM_PORTS 4
> > >
> > > There are a few rogue spaces before '4'.
> >
> > Argh, thanks, this is the curse of using VS code on multiple machines...
>
> I recommend vim ;-)
What is VS code? Very Serious Code?
I can recommend Emacs; that could help, too.
--
Kind regards,
Sakari Ailus
Powered by blists - more mailing lists