| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 2 Dec 2020 10:53:05 +0000
From: Dan Scally <djrscally@...il.com>
To: Sakari Ailus <sakari.ailus@...ux.intel.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-media@...r.kernel.org, devel@...ica.org, rjw@...ysocki.net,
lenb@...nel.org, gregkh@...uxfoundation.org,
mika.westerberg@...ux.intel.com, andriy.shevchenko@...ux.intel.com,
linus.walleij@...aro.org, bgolaszewski@...libre.com,
wsa@...nel.org, yong.zhi@...el.com, bingbu.cao@...el.com,
tian.shu.qiu@...el.com, mchehab@...nel.org, robert.moore@...el.com,
erik.kaneda@...el.com, pmladek@...e.com, rostedt@...dmis.org,
sergey.senozhatsky@...il.com, linux@...musvillemoes.dk,
kieran.bingham+renesas@...asonboard.com, jacopo+renesas@...ndi.org,
laurent.pinchart+renesas@...asonboard.com,
jorhand@...ux.microsoft.com, kitakar@...il.com,
heikki.krogerus@...ux.intel.com
Subject: Re: [PATCH 13/18] ipu3-cio2: Add functionality allowing software_node
connections to sensors on platforms designed for Windows
On 02/12/2020 10:38, Sakari Ailus wrote:
> Hi Laurent,
>
> On Wed, Dec 02, 2020 at 12:30:53AM +0200, Laurent Pinchart wrote:
>> Hi Daniel,
>>
>> On Tue, Dec 01, 2020 at 10:08:25PM +0000, Dan Scally wrote:
>>> On 30/11/2020 17:09, Laurent Pinchart wrote:
>>>> On Mon, Nov 30, 2020 at 01:31:24PM +0000, Daniel Scally wrote:
>>>>> Currently on platforms designed for Windows, connections between CIO2 and
>>>>> sensors are not properly defined in DSDT. This patch extends the ipu3-cio2
>>>>> driver to compensate by building software_node connections, parsing the
>>>>> connection properties from the sensor's SSDB buffer.
>>>>>
>>>>> Suggested-by: Jordan Hand <jorhand@...ux.microsoft.com>
>>>>> Signed-off-by: Daniel Scally <djrscally@...il.com>
>>>>> ---
>>>>> Changes since RFC v3:
>>>>>
>>>>> - Removed almost all global variables, dynamically allocated
>>>>> the cio2_bridge structure, plus a bunch of associated changes
>>>>> like
>>>>> - Added a new function to ipu3-cio2-main.c to check for an
>>>>> existing fwnode_graph before calling cio2_bridge_init()
>>>>> - Prefixed cio2_bridge_ to any variables and functions that
>>>>> lacked it
>>>>> - Assigned the new fwnode directly to the sensor's ACPI device
>>>>> fwnode as secondary. This removes the requirement to delay until
>>>>> the I2C devices are instantiated before ipu3-cio2 can probe, but
>>>>> it has a side effect, which is that those devices then grab a ref
>>>>> to the new software_node. This effectively prevents us from
>>>>> unloading the driver, because we can't free the memory that they
>>>>> live in whilst the device holds a reference to them. The work
>>>>> around at the moment is to _not_ unregister the software_nodes
>>>>> when ipu3-cio2 is unloaded; this becomes a one-time 'patch', that
>>>>> is simply skipped if the module is reloaded.
>>>>> - Moved the sensor's SSDB struct to be a member of cio2_sensor
>>>>> - Replaced ints with unsigned ints where appropriate
>>>>> - Iterated over all ACPI devices of a matching _HID rather than
>>>>> just the first to ensure we handle a device with multiple sensors
>>>>> of the same model.
>>>>>
>>>>> MAINTAINERS | 1 +
>>>>> drivers/media/pci/intel/ipu3/Kconfig | 18 ++
>>>>> drivers/media/pci/intel/ipu3/Makefile | 1 +
>>>>> drivers/media/pci/intel/ipu3/cio2-bridge.c | 260 ++++++++++++++++++
>>>>> drivers/media/pci/intel/ipu3/cio2-bridge.h | 108 ++++++++
>>>>> drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 27 ++
>>>>> drivers/media/pci/intel/ipu3/ipu3-cio2.h | 6 +
>>>>> 7 files changed, 421 insertions(+)
>>>>> create mode 100644 drivers/media/pci/intel/ipu3/cio2-bridge.c
>>>>> create mode 100644 drivers/media/pci/intel/ipu3/cio2-bridge.h
>>>>>
>>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>>> index 9702b886d6a4..188559a0a610 100644
>>>>> --- a/MAINTAINERS
>>>>> +++ b/MAINTAINERS
>>>>> @@ -8927,6 +8927,7 @@ INTEL IPU3 CSI-2 CIO2 DRIVER
>>>>> M: Yong Zhi <yong.zhi@...el.com>
>>>>> M: Sakari Ailus <sakari.ailus@...ux.intel.com>
>>>>> M: Bingbu Cao <bingbu.cao@...el.com>
>>>>> +M: Dan Scally <djrscally@...il.com>
>>>>> R: Tianshu Qiu <tian.shu.qiu@...el.com>
>>>>> L: linux-media@...r.kernel.org
>>>>> S: Maintained
>>>>> diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig
>>>>> index 82d7f17e6a02..2b3350d042be 100644
>>>>> --- a/drivers/media/pci/intel/ipu3/Kconfig
>>>>> +++ b/drivers/media/pci/intel/ipu3/Kconfig
>>>>> @@ -16,3 +16,21 @@ config VIDEO_IPU3_CIO2
>>>>> Say Y or M here if you have a Skylake/Kaby Lake SoC with MIPI CSI-2
>>>>> connected camera.
>>>>> The module will be called ipu3-cio2.
>>>>> +
>>>>> +config CIO2_BRIDGE
>>>>> + bool "IPU3 CIO2 Sensors Bridge"
>>>>> + depends on VIDEO_IPU3_CIO2
>>>>> + help
>>>>> + This extension provides an API for the ipu3-cio2 driver to create
>>>>> + connections to cameras that are hidden in SSDB buffer in ACPI. It
>>>>> + can be used to enable support for cameras in detachable / hybrid
>>>>> + devices that ship with Windows.
>>>>> +
>>>>> + Say Y here if your device is a detachable / hybrid laptop that comes
>>>>> + with Windows installed by the OEM, for example:
>>>>> +
>>>>> + - Microsoft Surface models (except Surface Pro 3)
>>>>> + - The Lenovo Miix line (for example the 510, 520, 710 and 720)
>>>>> + - Dell 7285
>>>>> +
>>>>> + If in doubt, say N here.
>>>>> diff --git a/drivers/media/pci/intel/ipu3/Makefile b/drivers/media/pci/intel/ipu3/Makefile
>>>>> index 429d516452e4..933777e6ea8a 100644
>>>>> --- a/drivers/media/pci/intel/ipu3/Makefile
>>>>> +++ b/drivers/media/pci/intel/ipu3/Makefile
>>>>> @@ -2,3 +2,4 @@
>>>>> obj-$(CONFIG_VIDEO_IPU3_CIO2) += ipu3-cio2.o
>>>>>
>>>>> ipu3-cio2-y += ipu3-cio2-main.o
>>>>> +ipu3-cio2-$(CONFIG_CIO2_BRIDGE) += cio2-bridge.o
>>>>> diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c
>>>>> new file mode 100644
>>>>> index 000000000000..fd3f8ba07274
>>>>> --- /dev/null
>>>>> +++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c
>>>>> @@ -0,0 +1,260 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0
>>>>> +/* Author: Dan Scally <djrscally@...il.com> */
>>>> Could you please add a blank line here ?
>>> Yes
>>>
>>>>> +#include <linux/acpi.h>
>>>>> +#include <linux/device.h>
>>>>> +#include <linux/i2c.h>
>>>> Is this header needed ?
>>>>
>>>>> +#include <linux/kernel.h>
>>>>> +#include <linux/module.h>
>>>> And this one ?
>>>>
>>>>> +#include <linux/pci.h>
>>>>> +#include <linux/property.h>
>>>>> +#include <media/v4l2-subdev.h>
>>>> And this one ?
>>> Ah yes - bit sloppy, they're orphaned from earlier versions, sorry about
>>> that.
>>>
>>>>> +
>>>>> +#include "cio2-bridge.h"
>>>>> +
>>>>> +/*
>>>>> + * Extend this array with ACPI Hardware ID's of devices known to be working.
>>>>> + * Do not add a HID for a sensor that is not actually supported.
>>>>> + */
>>>>> +static const char * const cio2_supported_devices[] = {
>>>> Maybe cio2_supported_sensors ?
>>> Sure
>>>
>>>>> + "INT33BE",
>>>>> + "OVTI2680",
>>>>> +};
>>>>> +
>>>>> +static int cio2_bridge_read_acpi_buffer(struct acpi_device *adev, char *id,
>>>>> + void *data, u32 size)
>>>>> +{
>>>>> + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
>>>>> + union acpi_object *obj;
>>>>> + acpi_status status;
>>>>> + int ret;
>>>>> +
>>>>> + status = acpi_evaluate_object(adev->handle, id, NULL, &buffer);
>>>>> + if (ACPI_FAILURE(status))
>>>>> + return -ENODEV;
>>>>> +
>>>>> + obj = buffer.pointer;
>>>>> + if (!obj) {
>>>>> + dev_err(&adev->dev, "Couldn't locate ACPI buffer\n");
>>>>> + return -ENODEV;
>>>>> + }
>>>>> +
>>>>> + if (obj->type != ACPI_TYPE_BUFFER) {
>>>>> + dev_err(&adev->dev, "Not an ACPI buffer\n");
>>>>> + ret = -ENODEV;
>>>>> + goto out_free_buff;
>>>>> + }
>>>>> +
>>>>> + if (obj->buffer.length > size) {
>>>>> + dev_err(&adev->dev, "Given buffer is too small\n");
>>>>> + ret = -EINVAL;
>>>>> + goto out_free_buff;
>>>>> + }
>>>>> +
>>>>> + memcpy(data, obj->buffer.pointer, obj->buffer.length);
>>>>> + ret = obj->buffer.length;
>>>>> +
>>>>> +out_free_buff:
>>>>> + kfree(buffer.pointer);
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +static void cio2_bridge_init_property_names(struct cio2_sensor *sensor)
>>>>> +{
>>>>> + strcpy(sensor->prop_names.clock_frequency, "clock-frequency");
>>>>> + strcpy(sensor->prop_names.rotation, "rotation");
>>>>> + strcpy(sensor->prop_names.bus_type, "bus-type");
>>>>> + strcpy(sensor->prop_names.data_lanes, "data-lanes");
>>>>> + strcpy(sensor->prop_names.remote_endpoint, "remote-endpoint");
>>>> This is a bit fragile, as there's no len check. How about the following
>>>> ?
>>>> static const struct cio2_property_names prop_names = {
>>>> .clock_frequency = "clock-frequency",
>>>> .rotation = "rotation",
>>>> .bus_type = "bus-type",
>>>> .data_lanes = "data-lanes",
>>>> .remote_endpoint = "remote-endpoint",
>>>> };
>>>>
>>>> static void cio2_bridge_init_property_names(struct cio2_sensor *sensor)
>>>> {
>>>> sensor->prop_names = prop_names;
>>>> }
>>>>
>>>> This shoudl generate a compilation warning if the string is too long.
>>>>
>>>> You could even inline that line in
>>>> cio2_bridge_create_fwnode_properties().
>>> Yes, I like that, thanks - I'll make the change.
>>>
>>>>> +}
>>>>> +
>>>>> +static void cio2_bridge_create_fwnode_properties(struct cio2_sensor *sensor)
>>>>> +{
>>>>> + unsigned int i;
>>>>> +
>>>>> + cio2_bridge_init_property_names(sensor);
>>>>> +
>>>>> + for (i = 0; i < 4; i++)
>>>>> + sensor->data_lanes[i] = i + 1;
>>>> Is there no provision in the SSDB for data lane remapping ?
>>> Sorry; don't follow what you mean by data lane remapping here.
>> Some CSI-2 receivers can remap data lanes. The routing inside the SoC
>> from the data lane input pins to the PHYs is configurable. This makes
>> board design easier as you can route the data lanes to any of the
>> inputs. That's why the data lanes DT property is a list of lane numbers
>> instead of a number of lanes. I'm actually not sure if the CIO2 supports
>> this.
> To my knowledge it does not. Only the number of lanes allocated to
> different ports matters.
>
So nothing to change here then I think?
>>>>> @@ -0,0 +1,108 @@
>>>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>>>> +/* Author: Dan Scally <djrscally@...il.com> */
>>>>> +#ifndef __CIO2_BRIDGE_H
>>>>> +#define __CIO2_BRIDGE_H
>>>>> +
>>>>> +#include <linux/property.h>
>>>>> +
>>>>> +#define CIO2_HID "INT343E"
>>>>> +#define CIO2_NUM_PORTS 4
>>>> There are a few rogue spaces before '4'.
>>> Argh, thanks, this is the curse of using VS code on multiple machines...
>> I recommend vim ;-)
> What is VS code? Very Serious Code?
Visual Studio Code - it has some nice features, but the
facepalm-to-productivity ratio is a bit high.
> I can recommend Emacs; that could help, too.
Powered by blists - more mailing lists