lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sat, 5 Dec 2020 14:14:12 +0100
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     Stefan Agner <stefan@...er.ch>
Cc:     khilman@...libre.com, robh+dt@...nel.org,
        Neil Armstrong <narmstrong@...libre.com>, jbrunet@...libre.com,
        christianshewitt@...il.com, jian.hu@...ogic.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/5] arm64: dts: meson: g12b: odroid-n2: fix PHY
 deassert timing requirements

On Tue, Dec 1, 2020 at 2:21 PM Stefan Agner <stefan@...er.ch> wrote:
>
> According to the datasheet (Rev. 1.9) the RTL8211F requires at least
> 72ms "for internal circuits settling time" before accessing the PHY
> egisters. This fixes an issue where the Ethernet link doesn't come up
> when using ip link set down/up:
>   [   29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
>   [   34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
>   [   34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
>   [   34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
>   [   34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
>
> Fixes: 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
> Signed-off-by: Stefan Agner <stefan@...er.ch>
with the "registers" typo above fixed:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ