linux-kernel - Re: [PATCH net-next] nfc: s3fwrn5: Change irqflags

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CACwDmQBON8bNDR1gEGafb6S63LgkQf9oS9T4=RVQDHQiHgTj9g@mail.gmail.com>
Date:   Mon, 7 Dec 2020 23:26:21 +0900
From:   Bongsu Jeon <bongsu.jeon2@...il.com>
To:     Krzysztof Kozlowski <krzk@...nel.org>
Cc:     linux-nfc@...ts.01.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, Bongsu Jeon <bongsu.jeon@...sung.com>
Subject: Re: [PATCH net-next] nfc: s3fwrn5: Change irqflags

On Mon, Dec 7, 2020 at 11:13 PM Krzysztof Kozlowski <krzk@...nel.org> wrote:
>
> On Mon, Dec 07, 2020 at 10:39:01PM +0900, Bongsu Jeon wrote:
> > On Mon, Dec 7, 2020 at 8:51 PM Krzysztof Kozlowski <krzk@...nel.org> wrote:
> > >
> > > On Mon, Dec 07, 2020 at 08:38:27PM +0900, Bongsu Jeon wrote:
> > > > From: Bongsu Jeon <bongsu.jeon@...sung.com>
> > > >
> > > > change irqflags from IRQF_TRIGGER_HIGH to IRQF_TRIGGER_RISING for stable
> > > > Samsung's nfc interrupt handling.
> > >
> > > 1. Describe in commit title/subject the change. Just a word "change irqflags" is
> > >    not enough.
> > >
> > Ok. I'll update it.
> >
> > > 2. Describe in commit message what you are trying to fix. Before was not
> > >    stable? The "for stable interrupt handling" is a little bit vauge.
> > >
> > Usually, Samsung's NFC Firmware sends an i2c frame as below.
> >
> > 1. NFC Firmware sets the gpio(interrupt pin) high when there is an i2c
> > frame to send.
> > 2. If the CPU's I2C master has received the i2c frame, NFC F/W sets
> > the gpio low.
> >
> > NFC driver's i2c interrupt handler would be called in the abnormal case
> > as the NFC F/W task of number 2 is delayed because of other high
> > priority tasks.
> > In that case, NFC driver will try to receive the i2c frame but there
> > isn't any i2c frame
> > to send in NFC. It would cause an I2C communication problem.
> > This case would hardly happen.
> > But, I changed the interrupt as a defense code.
> > If Driver uses the TRIGGER_RISING not LEVEL trigger, there would be no problem
> > even if the NFC F/W task is delayed.
>
> All this should be explained in commit message, not in the email.
>
Okay.  I will

> >
> > > 3. This is contradictory to the bindings and current DTS. I think the
> > >    driver should not force the specific trigger type because I could
> > >    imagine some configuration that the actual interrupt to the CPU is
> > >    routed differently.
> > >
> > >    Instead, how about removing the trigger flags here and fixing the DTS
> > >    and bindings example?
> > >
> >
> > As I mentioned before,
> > I changed this code because of Samsung NFC's I2C Communication way.
> > So, I think that it is okay for the nfc driver to force the specific
> > trigger type( EDGE_RISING).
> >
> > What do you think about it?
>
> Some different chip or some different hardware implementation could have
> the signal inverted, e.g. edge falling, not rising. This is rather
> a theoretical scenario but still such change makes the code more
> generic, configurable with DTS. Therefore trigger mode should be
> configured via DTS, not enforced by the driver.
>
Okay. I understand it.

> Best regards,
> Krzysztof