| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <515C781A-838E-496E-867C-0645E6A076EE@fb.com>
Date: Wed, 9 Dec 2020 22:04:33 +0000
From: Song Liu <songliubraving@...com>
To: Matthew Ruffell <matthew.ruffell@...onical.com>,
Xiao Ni <xni@...hat.com>
CC: linux-raid <linux-raid@...r.kernel.org>,
Song Liu <song@...nel.org>,
lkml <linux-kernel@...r.kernel.org>, Coly Li <colyli@...e.de>,
Guoqing Jiang <guoqing.jiang@...ud.ionos.com>,
"khalid.elmously@...onical.com" <khalid.elmously@...onical.com>,
Jay Vosburgh <jay.vosburgh@...onical.com>
Subject: Re: PROBLEM: Recent raid10 block discard patchset causes filesystem
corruption on fstrim
> On Dec 8, 2020, at 8:17 PM, Song Liu <songliubraving@...com> wrote:
>
> Hi Matthew,
>
>> On Dec 8, 2020, at 7:46 PM, Matthew Ruffell <matthew.ruffell@...onical.com> wrote:
>>
>> Hello,
>>
>> I recently backported the following patches into the Ubuntu stable kernels:
>>
>> md: add md_submit_discard_bio() for submitting discard bio
>> md/raid10: extend r10bio devs to raid disks
>> md/raid10: pull codes that wait for blocked dev into one function
>> md/raid10: improve raid10 discard request
>> md/raid10: improve discard request for far layout
I reproduced the issue with 5.10-rc7. With md/raid10, the issue is fixed
when I revert the md/raid10 patches.
>> dm raid: fix discard limits for raid1 and raid10
>> dm raid: remove unnecessary discard limits for raid10
Since 5.10 official will be released this weekend, I am afraid we have to
revert these changes for 5.10.
I just sent a patch to revert
f0e90b6c663a ("dm raid: remove unnecessary discard limits for raid10")
I will send pull request to revert the md/raid10 patches.
Thanks,
Song
>
> Thanks for the report!
>
> Hi Xiao,
>
> Could you please take a look at this and let me know soon? We need to fix
> this before 5.10 official release.
>
> Thanks,
> Song
>
>>
>> and this morning, a user reported the following downstream bug:
>>
>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/
>>
>> Their weekly cronjob that runs fstrim had run, and their raid10 array has
>> extensive data corruption.
>>
>> The issue is reproducible on the latest 5.10-rc7 mainline kernel, steps are
>> below.
>>
>> I used a m5d.4xlarge instance on AWS to ultilise 2x 300GB SSDs that support
>> block discard. You will want to select small disks to lower the time needed
>> to reproduce.
>>
>> $ uname -rv
>> 5.10.0-rc7+ #1 SMP Wed Dec 9 01:15:27 UTC 2020
>>
>> Create a raid10 array, with LVM:
>>
>> $ lsblk
>> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
>> nvme0n1 259:0 0 8G 0 disk
>> └─nvme0n1p1 259:1 0 8G 0 part /
>> nvme1n1 259:2 0 279.4G 0 disk
>> nvme2n1 259:3 0 279.4G 0 disk
>>
>> $ sudo -s
>> # mdadm -C -v -l10 -n2 -N "lv-raid" -R /dev/md0 /dev/nvme1n1 /dev/nvme2n1
>> mdadm: layout defaults to n2
>> mdadm: layout defaults to n2
>> mdadm: chunk size defaults to 512K
>> mdadm: size set to 292836352K
>> mdadm: automatically enabling write-intent bitmap on large array
>> mdadm: Defaulting to version 1.2 metadata
>> mdadm: array /dev/md0 started.
>> # pvcreate -ff -y /dev/md0
>> Physical volume "/dev/md0" successfully created.
>> # vgcreate -f -y VolGroup /dev/md0
>> Volume group "VolGroup" successfully created
>> # lvcreate -n root -L 100G -ay -y VolGroup
>> Logical volume "root" created.
>> # mkfs.ext4 /dev/VolGroup/root
>> mke2fs 1.44.1 (24-Mar-2018)
>> Discarding device blocks: done
>> Creating filesystem with 26214400 4k blocks and 6553600 inodes
>> Filesystem UUID: d7be2e14-fa4d-4489-884b-3bef63b1e1db
>> Superblock backups stored on blocks:
>> 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
>> 4096000, 7962624, 11239424, 20480000, 23887872
>>
>> Allocating group tables: done
>> Writing inode tables: done
>> Creating journal (131072 blocks): done
>> Writing superblocks and filesystem accounting information: done
>> # mount /dev/VolGroup/root /mnt
>>
>> Next, wait for the disk check to complete, 25 minutes on m5d.4xlarge instance.
>>
>> # cat /proc/mdstat
>> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
>> md0 : active raid10 nvme2n1[1] nvme1n1[0]
>> 292836352 blocks super 1.2 2 near-copies [2/2] [UU]
>> [==>..................] resync = 12.0% (35211392/292836352) finish=21.4min speed=200340K/sec
>> bitmap: 3/3 pages [12KB], 65536KB chunk
>>
>> unused devices: <none>
>> # cat /sys/block/md0/md/mismatch_cnt
>> 76918016
>>
>> # cat /proc/mdstat
>> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
>> md0 : active raid10 nvme2n1[1] nvme1n1[0]
>> 292836352 blocks super 1.2 2 near-copies [2/2] [UU]
>> bitmap: 0/3 pages [0KB], 65536KB chunk
>>
>> unused devices: <none>
>> # cat /sys/block/md0/md/mismatch_cnt
>> 582330240
>>
>> Now that the check is complete, create a file, sync and delete it:
>>
>> # dd if=/dev/zero of=/mnt/data.raw bs=4K count=1M
>> 1048576+0 records in
>> 1048576+0 records out
>> 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 3.95974 s, 1.1 GB/s
>> # sync
>> # rm /mnt/data.raw
>>
>> Perform a check:
>>
>> # echo check > /sys/block/md0/md/sync_action
>>
>> Again, wait 25 minutes for it to complete:
>>
>> # cat /proc/mdstat
>> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
>> md0 : active raid10 nvme1n1[1] nvme2n1[0]
>> 292836352 blocks super 1.2 2 near-copies [2/2] [UU]
>> [==>..................] check = 13.7% (40356224/292836352) finish=20.8min speed=201707K/sec
>> bitmap: 0/3 pages [0KB], 65536KB chunk
>>
>> unused devices: <none>
>> # cat /sys/block/md0/md/mismatch_cnt
>> 1469696
>>
>> # cat /proc/mdstat
>> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
>> md0 : active raid10 nvme1n1[1] nvme2n1[0]
>> 292836352 blocks super 1.2 2 near-copies [2/2] [UU]
>> bitmap: 0/3 pages [0KB], 65536KB chunk
>>
>> unused devices: <none>
>> # cat /sys/block/md0/md/mismatch_cnt
>> 1469696
>>
>> Now, perform the fstrim:
>>
>> # fstrim /mnt --verbose
>> /mnt: 97.9 GiB (105089236992 bytes) trimmed
>>
>> Go for another check:
>>
>> # echo check >/sys/block/md0/md/sync_action
>> # cat /proc/mdstat
>> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
>> md0 : active raid10 nvme1n1[1] nvme2n1[0]
>> 292836352 blocks super 1.2 2 near-copies [2/2] [UU]
>> [========>............] check = 40.3% (118270848/292836352) finish=14.4min speed=200963K/sec
>> bitmap: 0/3 pages [0KB], 65536KB chunk
>>
>> unused devices: <none>
>> # cat /sys/block/md0/md/mismatch_cnt
>> 205324928
>>
>> # cat /proc/mdstat
>> Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
>> md0 : active raid10 nvme1n1[1] nvme2n1[0]
>> 292836352 blocks super 1.2 2 near-copies [2/2] [UU]
>> bitmap: 0/3 pages [0KB], 65536KB chunk
>>
>> unused devices: <none>
>> # cat /sys/block/md0/md/mismatch_cnt
>> 205324928
>>
>> Now, we need to take the raid10 array down, and perform a fsck on one disk at
>> a time:
>>
>> # umount /mnt
>> # vgchange -a n /dev/VolGroup
>> 0 logical volume(s) in volume group "VolGroup" now active
>> # mdadm --stop /dev/md0
>> mdadm: stopped /dev/md0
>>
>> Let's do first disk;
>>
>> # mdadm --assemble /dev/md127 /dev/nvme1n1
>> mdadm: /dev/md1 assembled from 1 drive - need all 2 to start it (use --run to insist).
>> # mdadm --run /dev/md127
>> mdadm: started array /dev/md/lv-raid
>> # vgchange -a y /dev/VolGroup
>> 1 logical volume(s) in volume group "VolGroup" now active
>> # fsck.ext4 -n -f /dev/VolGroup/root
>> e2fsck 1.44.1 (24-Mar-2018)
>> Pass 1: Checking inodes, blocks, and sizes
>> Pass 2: Checking directory structure
>> Pass 3: Checking directory connectivity
>> Pass 4: Checking reference counts
>> Pass 5: Checking group summary information
>> /dev/VolGroup/root: 11/6553600 files (0.0% non-contiguous), 557848/26214400 blocks
>> # vgchange -a n /dev/VolGroup
>> 0 logical volume(s) in volume group "VolGroup" now active
>> # mdadm --stop /dev/md127
>> mdadm: stopped /dev/md127
>>
>> The second disk:
>>
>> # mdadm --assemble /dev/md127 /dev/nvme2n1
>> mdadm: /dev/md1 assembled from 1 drive - need all 2 to start it (use --run to insist).
>> # mdadm --run /dev/md127
>> mdadm: started array /dev/md/lv-raid
>> # vgchange -a y /dev/VolGroup
>> 1 logical volume(s) in volume group "VolGroup" now active
>> # fsck.ext4 -n -f /dev/VolGroup/root
>> e2fsck 1.44.1 (24-Mar-2018)
>> Resize inode not valid. Recreate? no
>>
>> Pass 1: Checking inodes, blocks, and sizes
>> Inode 7 has illegal block(s). Clear? no
>>
>> Illegal indirect block (1714656753) in inode 7. IGNORED.
>> Error while iterating over blocks in inode 7: Illegal indirect block found
>>
>> /dev/VolGroup/root: ********** WARNING: Filesystem still has errors **********
>>
>> e2fsck: aborted
>>
>> /dev/VolGroup/root: ********** WARNING: Filesystem still has errors **********
>>
>> # vgchange -a n /dev/VolGroup
>> 0 logical volume(s) in volume group "VolGroup" now active
>> # mdadm --stop /dev/md127
>> mdadm: stopped /dev/md127
>>
>> There are no panics or anything in dmesg. The directory structure of the first
>> disk is intact, but the second disk only has Lost+Found present.
>>
>> I can confirm it is the patches listed at the top of the email, but I have not
>> had an opportunity to bisect to find the exact root cause. I will do that once
>> we confirm what Ubuntu stable kernels are affected and begin reverting the
>> patches.
>>
>> Let me know if you need any more details.
>>
>> Thanks,
>> Matthew Ruffell
Powered by blists - more mailing lists