linux-kernel - Re: [PATCH v3 1/3] irqchip: qcom-pdc: Fix phantom irq when changing between rising/falling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 10 Dec 2020 13:11:12 -0800
From:   Stephen Boyd <swboyd@...omium.org>
To:     Douglas Anderson <dianders@...omium.org>,
        Jason Cooper <jason@...edaemon.net>,
        Linus Walleij <linus.walleij@...aro.org>,
        Marc Zyngier <maz@...nel.org>,
        Thomas Gleixner <tglx@...utronix.de>
Cc:     linux-arm-msm@...r.kernel.org,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Srinivas Ramana <sramana@...eaurora.org>,
        Maulik Shah <mkshah@...eaurora.org>,
        Neeraj Upadhyay <neeraju@...eaurora.org>,
        Rajendra Nayak <rnayak@...eaurora.org>,
        linux-gpio@...r.kernel.org,
        Douglas Anderson <dianders@...omium.org>,
        Andy Gross <agross@...nel.org>,
        Archana Sathyakumar <asathyak@...eaurora.org>,
        Lina Iyer <ilina@...eaurora.org>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/3] irqchip: qcom-pdc: Fix phantom irq when changing between rising/falling

Quoting Douglas Anderson (2020-12-09 16:41:01)
> We have a problem if we use gpio-keys and configure wakeups such that
> we only want one edge to wake us up.  AKA:
>   wakeup-event-action = <EV_ACT_DEASSERTED>;
>   wakeup-source;
> 
> Specifically we end up with a phantom interrupt that blocks suspend if
> the line was already high and we want wakeups on rising edges (AKA we
> want the GPIO to go low and then high again before we wake up).  The
> opposite is also problematic.
> 
> Specifically, here's what's happening today:
> 1. Normally, gpio-keys configures to look for both edges.  Due to the
>    current workaround introduced in commit c3c0c2e18d94 ("pinctrl:
>    qcom: Handle broken/missing PDC dual edge IRQs on sc7180"), if the
>    line was high we'd configure for falling edges.
> 2. At suspend time, we change to look for rising edges.
> 3. After qcom_pdc_gic_set_type() runs, we get a phantom interrupt.
> 
> We can solve this by just clearing the phantom interrupt.
> 
> NOTE: it is possible that this could cause problems for a client with
> very specific needs, but there's not much we can do with this
> hardware.  As an example, let's say the interrupt signal is currently
> high and the client is looking for falling edges.  The client now
> changes to look for rising edges.  The client could possibly expect
> that if the line has a short pulse low (and back high) that it would
> always be detected.  Specifically no matter when the pulse happened,
> it should either have tripped the (old) falling edge trigger or the
> (new) rising edge trigger.  We will simply not trip it.  We could
> narrow down the race a bit by polling our parent before changing
> types, but no matter what we do there will still be a period of time
> where we can't tell the difference between a real transition (or more
> than one transition) and the phantom.
> 
> Fixes: f55c73aef890 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> Reviewed-by: Maulik Shah <mkshah@...eaurora.org>
> Tested-by: Maulik Shah <mkshah@...eaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@...omium.org>