[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201213183759.223246-8-aford173@gmail.com>
Date: Sun, 13 Dec 2020 12:37:47 -0600
From: Adam Ford <aford173@...il.com>
To: linux-renesas-soc@...r.kernel.org
Cc: aford@...conembedded.com, Adam Ford <aford173@...il.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/18] arm64: dts: renesas: beacon: Fix LVDS PWM Backlight
The backlight didn't really work correctly due to some updates that were
made in hardware. It should be safe to apply these, because the older
hardware was never shipped to anyone, so it shouldn't break anything.
Signed-off-by: Adam Ford <aford173@...il.com>
---
.../boot/dts/renesas/beacon-renesom-baseboard.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 130993b1b20a..aab39aae5ccb 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -11,8 +11,8 @@ / {
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
power-supply = <®_lcd>;
- enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>;
- pwms = <&pwm2 0 50000>;
+ enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm2 0 25000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
@@ -119,9 +119,9 @@ panel-timing {
hback-porch = <40>;
vfront-porch = <13>;
vback-porch = <29>;
- vsync-len = <3>;
+ vsync-len = <1>;
hsync-active = <1>;
- vsync-active = <1>;
+ vsync-active = <3>;
de-active = <1>;
pixelclk-active = <0>;
};
@@ -575,7 +575,7 @@ pwm0_pins: pwm0 {
pwm2_pins: pwm2 {
groups = "pwm2_a";
- function = "pwm2_a";
+ function = "pwm2";
};
sdhi0_pins: sd0 {
--
2.25.1
Powered by blists - more mailing lists