| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201216153738.GN207743@dell>
Date: Wed, 16 Dec 2020 15:37:38 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Cc: marek.vasut+renesas@...il.com, matti.vaittinen@...rohmeurope.com,
lgirdwood@...il.com, broonie@...nel.org, linus.walleij@...aro.org,
bgolaszewski@...libre.com, khiem.nguyen.xt@...esas.com,
linux-power@...rohmeurope.com, linux-gpio@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 12/12] mfd: bd9571mwv: Add support for BD9574MWF
On Wed, 16 Dec 2020, Yoshihiro Shimoda wrote:
> From: Khiem Nguyen <khiem.nguyen.xt@...esas.com>
>
> The new PMIC BD9574MWF inherits features from BD9571MWV.
> Add the support of new PMIC to existing bd9571mwv driver.
>
> Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@...esas.com>
> [shimoda: rebase and refactor]
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
> ---
> drivers/mfd/bd9571mwv.c | 86 ++++++++++++++++++++++++++++++++++++++++++-
> include/linux/mfd/bd9571mwv.h | 18 +++++++--
> 2 files changed, 99 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
> index ccf1a60..f660de6 100644
> --- a/drivers/mfd/bd9571mwv.c
> +++ b/drivers/mfd/bd9571mwv.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> - * ROHM BD9571MWV-M MFD driver
> + * ROHM BD9571MWV-M and BD9574MVF-M MFD driver
While you're at it, please remove "MFD".
Maybe replace with 'core' or something?
> * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@...il.com>
> * Copyright (C) 2020 Renesas Electronics Corporation
> @@ -11,6 +11,7 @@
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> #include <linux/mfd/core.h>
> +#include <linux/mfd/rohm-generic.h>
> #include <linux/module.h>
>
> #include <linux/mfd/bd9571mwv.h>
> @@ -28,6 +29,7 @@ struct bd957x_data {
> int num_cells;
> };
>
> +/* For BD9571MWV */
Don't think this is required?
> static const struct mfd_cell bd9571mwv_cells[] = {
> { .name = "bd9571mwv-regulator", },
> { .name = "bd9571mwv-gpio", },
> @@ -124,6 +126,81 @@ static const struct bd957x_data bd9571mwv_data = {
> .num_cells = ARRAY_SIZE(bd9571mwv_cells),
> };
>
> +/* For BD9574MWF */
We can see that by the struct name.
> +static const struct mfd_cell bd9574mwf_cells[] = {
> + { .name = "bd9574mwf-regulator", },
> + { .name = "bd9574mwf-gpio", },
> +};
> +
> +static const struct regmap_range bd9574mwf_readable_yes_ranges[] = {
> + regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION),
> + regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
> + regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_SETVMAX),
> + regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_MONIVDAC),
> + regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
> + regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INTMASK),
> + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
> +};
> +
> +static const struct regmap_access_table bd9574mwf_readable_table = {
> + .yes_ranges = bd9574mwf_readable_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(bd9574mwf_readable_yes_ranges),
> +};
> +
> +static const struct regmap_range bd9574mwf_writable_yes_ranges[] = {
> + regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
> + regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID),
> + regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT),
> + regmap_reg_range(BD9571MWV_GPIO_INT_SET, BD9571MWV_GPIO_INTMASK),
> + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
> +};
> +
> +static const struct regmap_access_table bd9574mwf_writable_table = {
> + .yes_ranges = bd9574mwf_writable_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(bd9574mwf_writable_yes_ranges),
> +};
> +
> +static const struct regmap_range bd9574mwf_volatile_yes_ranges[] = {
> + regmap_reg_range(BD9571MWV_DVFS_MONIVDAC, BD9571MWV_DVFS_MONIVDAC),
> + regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
> + regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT),
> + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),
> +};
> +
> +static const struct regmap_access_table bd9574mwf_volatile_table = {
> + .yes_ranges = bd9574mwf_volatile_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(bd9574mwf_volatile_yes_ranges),
> +};
> +
> +static const struct regmap_config bd9574mwf_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> + .rd_table = &bd9574mwf_readable_table,
> + .wr_table = &bd9574mwf_writable_table,
> + .volatile_table = &bd9574mwf_volatile_table,
> + .max_register = 0xff,
> +};
> +
> +static struct regmap_irq_chip bd9574mwf_irq_chip = {
> + .name = "bd9574mwf",
> + .status_base = BD9571MWV_INT_INTREQ,
> + .mask_base = BD9571MWV_INT_INTMASK,
> + .ack_base = BD9571MWV_INT_INTREQ,
> + .init_ack_masked = true,
> + .num_regs = 1,
> + .irqs = bd9571mwv_irqs,
> + .num_irqs = ARRAY_SIZE(bd9571mwv_irqs),
> +};
> +
> +static const struct bd957x_data bd9574mwf_data = {
> + .part_name = BD9574MWF_PART_NAME,
> + .regmap_config = &bd9574mwf_regmap_config,
> + .irq_chip = &bd9574mwf_irq_chip,
> + .cells = bd9574mwf_cells,
> + .num_cells = ARRAY_SIZE(bd9574mwf_cells),
> +};
> +
> static int bd9571mwv_identify(struct device *dev, struct regmap *regmap,
> const char *part_name)
> {
> @@ -181,6 +258,9 @@ static int bd9571mwv_probe(struct i2c_client *client,
> case BD9571MWV_PRODUCT_CODE_VAL:
> data = &bd9571mwv_data;
> break;
> + case BD9574MWF_PRODUCT_CODE_VAL:
> + data = &bd9574mwf_data;
> + break;
> default:
> dev_err(dev, "Unsupported device 0x%x\n", ret);
> return -ENOENT;
> @@ -210,12 +290,14 @@ static int bd9571mwv_probe(struct i2c_client *client,
>
> static const struct of_device_id bd9571mwv_of_match_table[] = {
> { .compatible = "rohm,bd9571mwv", },
> + { .compatible = "rohm,bd9574mwf", },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
>
> static const struct i2c_device_id bd9571mwv_id_table[] = {
> - { "bd9571mwv", 0 },
> + { "bd9571mwv", ROHM_CHIP_TYPE_BD9571 },
> + { "bd9574mwf", ROHM_CHIP_TYPE_BD9574 },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(i2c, bd9571mwv_id_table);
> diff --git a/include/linux/mfd/bd9571mwv.h b/include/linux/mfd/bd9571mwv.h
> index 5ab976a..0fc7789 100644
> --- a/include/linux/mfd/bd9571mwv.h
> +++ b/include/linux/mfd/bd9571mwv.h
> @@ -1,6 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0-only */
> /*
> - * ROHM BD9571MWV-M driver
> + * ROHM BD9571MWV-M and BD9574MWF-M driver
> *
> * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@...il.com>
> * Copyright (C) 2020 Renesas Electronics Corporation
> @@ -14,11 +14,12 @@
> #include <linux/device.h>
> #include <linux/regmap.h>
>
> -/* List of registers for BD9571MWV */
> +/* List of registers for BD9571MWV and BD9574MWF */
> #define BD9571MWV_VENDOR_CODE 0x00
> #define BD9571MWV_VENDOR_CODE_VAL 0xdb
> #define BD9571MWV_PRODUCT_CODE 0x01
> #define BD9571MWV_PRODUCT_CODE_VAL 0x60
> +#define BD9574MWF_PRODUCT_CODE_VAL 0x74
> #define BD9571MWV_PRODUCT_REVISION 0x02
>
> #define BD9571MWV_I2C_FUSA_MODE 0x10
> @@ -48,6 +49,7 @@
> #define BD9571MWV_VD33_VID 0x44
>
> #define BD9571MWV_DVFS_VINIT 0x50
> +#define BD9574MWF_VD09_VINIT 0x51
> #define BD9571MWV_DVFS_SETVMAX 0x52
> #define BD9571MWV_DVFS_BOOSTVID 0x53
> #define BD9571MWV_DVFS_SETVID 0x54
> @@ -61,6 +63,7 @@
> #define BD9571MWV_GPIO_INT_SET 0x64
> #define BD9571MWV_GPIO_INT 0x65
> #define BD9571MWV_GPIO_INTMASK 0x66
> +#define BD9574MWF_GPIO_MUX 0x67
>
> #define BD9571MWV_REG_KEEP(n) (0x70 + (n))
>
> @@ -70,6 +73,8 @@
> #define BD9571MWV_PROT_ERROR_STATUS2 0x83
> #define BD9571MWV_PROT_ERROR_STATUS3 0x84
> #define BD9571MWV_PROT_ERROR_STATUS4 0x85
> +#define BD9574MWF_PROT_ERROR_STATUS5 0x86
> +#define BD9574MWF_SYSTEM_ERROR_STATUS 0x87
>
> #define BD9571MWV_INT_INTREQ 0x90
> #define BD9571MWV_INT_INTREQ_MD1_INT BIT(0)
> @@ -82,9 +87,16 @@
> #define BD9571MWV_INT_INTREQ_BKUP_TRG_INT BIT(7)
> #define BD9571MWV_INT_INTMASK 0x91
>
> +#define BD9574MWF_SSCG_CNT 0xA0
> +#define BD9574MWF_POFFB_MRB 0xA1
> +#define BD9574MWF_SMRB_WR_PROT 0xA2
> +#define BD9574MWF_SMRB_ASSERT 0xA3
> +#define BD9574MWF_SMRB_STATUS 0xA4
> +
> #define BD9571MWV_ACCESS_KEY 0xff
>
> #define BD9571MWV_PART_NAME "BD9571MWV"
> +#define BD9574MWF_PART_NAME "BD9574MWF"
>
> /* Define the BD9571MWV IRQ numbers */
> enum bd9571mwv_irqs {
> @@ -93,7 +105,7 @@ enum bd9571mwv_irqs {
> BD9571MWV_IRQ_MD2_E2,
> BD9571MWV_IRQ_PROT_ERR,
> BD9571MWV_IRQ_GP,
> - BD9571MWV_IRQ_128H_OF,
> + BD9571MWV_IRQ_128H_OF, /* BKUP_HOLD on BD9574MWF */
> BD9571MWV_IRQ_WDT_OF,
> BD9571MWV_IRQ_BKUP_TRG,
> };
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists