| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <160842164192.1580929.12823359876682723808@swboyd.mtv.corp.google.com>
Date: Sat, 19 Dec 2020 15:47:21 -0800
From: Stephen Boyd <swboyd@...omium.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Kiran Gunda <kgunda@...eaurora.org>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
robh@...nel.org, swboyd@...omium.org
Cc: Kiran Gunda <kgunda@...eaurora.org>
Subject: Re: [PATCH V4 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format
Quoting Kiran Gunda (2020-12-18 00:14:51)
> Convert the bindings from .txt to .yaml format.
>
> Signed-off-by: Kiran Gunda <kgunda@...eaurora.org>
> ---
> .../devicetree/bindings/mfd/qcom,spmi-pmic.txt | 80 -------------
> .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 127 +++++++++++++++++++++
> 2 files changed, 127 insertions(+), 80 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> deleted file mode 100644
> index 79367a4..0000000
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> +++ /dev/null
> @@ -1,80 +0,0 @@
> - Qualcomm SPMI PMICs multi-function device bindings
> -
> -The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
> -PMICs. These PMICs use a QPNP scheme through SPMI interface.
> -QPNP is effectively a partitioning scheme for dividing the SPMI extended
> -register space up into logical pieces, and set of fixed register
> -locations/definitions within these regions, with some of these regions
> -specifically used for interrupt handling.
> -
> -The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
> -interfaced to the chip via the SPMI (System Power Management Interface) bus.
> -Support for multiple independent functions are implemented by splitting the
> -16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
> -each. A function can consume one or more of these fixed-size register regions.
> -
> -Required properties:
> -- compatible: Should contain one of:
> - "qcom,pm8941",
> - "qcom,pm8841",
> - "qcom,pma8084",
> - "qcom,pm8019",
> - "qcom,pm8226",
> - "qcom,pm8110",
> - "qcom,pma8084",
> - "qcom,pmi8962",
> - "qcom,pmd9635",
> - "qcom,pm8994",
> - "qcom,pmi8994",
> - "qcom,pm8916",
> - "qcom,pm8004",
> - "qcom,pm8909",
> - "qcom,pm8950",
> - "qcom,pmi8950",
> - "qcom,pm8998",
> - "qcom,pmi8998",
> - "qcom,pm8005",
> - or generalized "qcom,spmi-pmic".
> -- reg: Specifies the SPMI USID slave address for this device.
> - For more information see:
> - Documentation/devicetree/bindings/spmi/spmi.yaml
> -
> -Required properties for peripheral child nodes:
> -- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name.
> -
> -Optional properties for peripheral child nodes:
> -- interrupts: Interrupts are specified as a 4-tuple. For more information
> - see:
> - Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> -- interrupt-names: Corresponding interrupt name to the interrupts property
> -
> -Each child node of SPMI slave id represents a function of the PMIC. In the
> -example below the rtc device node represents a peripheral of pm8941
> -SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
> -
> -Example:
> -
> - spmi {
> - compatible = "qcom,spmi-pmic-arb";
> -
> - pm8941@0 {
> - compatible = "qcom,pm8941", "qcom,spmi-pmic";
> - reg = <0x0 SPMI_USID>;
> -
> - rtc {
> - compatible = "qcom,rtc";
> - interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "alarm";
> - };
> - };
> -
> - pm8941@1 {
> - compatible = "qcom,pm8941", "qcom,spmi-pmic";
> - reg = <0x1 SPMI_USID>;
> -
> - regulator {
> - compatible = "qcom,regulator";
> - regulator-name = "8941_boost";
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> new file mode 100644
> index 0000000..e458dd1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> @@ -0,0 +1,127 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI PMICs multi-function device bindings
> +
> +maintainers:
> + - Stephen Boyd <sboyd@...nel.org>
Someone at Qualcomm should be the maintainer here. Maybe you?
> +
> +description: |
> + The Qualcomm SPMI PMICs use a QPNP scheme through SPMI interface.
What is QPNP?
> + QPNP is effectively a partitioning scheme for dividing the SPMI extended
> + register space up into logical pieces, and set of fixed register
> + locations/definitions within these regions, with some of these regions
> + specifically used for interrupt handling.
> +
> + The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
> + interfaced to the chip via the SPMI (System Power Management Interface) bus.
> + Support for multiple independent functions are implemented by splitting the
> + 16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
> + each. A function can consume one or more of these fixed-size register regions.
> +
> +properties:
> + spmi_bus:
> + type: object
> + description: SPMI bus node
> +
> +patternProperties:
> + "^pmic@[0-9]$":
> + description: Child PMIC nodes
> + type: object
> +
> + properties:
> + compatible:
> + items:
> + - enum:
> + # Sorted based on subtype ID the device reports
> + - qcom,pm8941
> + - qcom,pm8841
> + - qcom,pma8084
> + - qcom,pm8019
> + - qcom,pm8226
> + - qcom,pm8110
> + - qcom,pma8084
> + - qcom,pmi8962
> + - qcom,pmd9635
> + - qcom,pm8994
> + - qcom,pmi8994
> + - qcom,pm8916
> + - qcom,pm8004
> + - qcom,pm8909
> + - qcom,pm8950
> + - qcom,pmi8950
> + - qcom,pm8998
> + - qcom,pmi8998
> + - qcom,pm8005
> + - qcom,pm660l
> + - qcom,pm660
> +
> + - enum:
> + - qcom,spmi-pmic
> +
> + reg:
> + maxItems: 1
> + description:
> + Specifies the SPMI USID slave address for this device.
> + For more information see bindings/spmi/spmi.txt
> +
> + patternProperties:
> + "@[0-9a-f]$":
Is that @ sign supposed to be a ^ sign? I thought the child nodes of a
pmic node were [a-zA-Z0-9-] or some sort of regex like that. Certainly
not an address that doesn't exist. They look to be things like 'rtc' or
'regulator'.
> + description:
> + Each child node of SPMI slave id represents a function of the PMIC.
> + In the example below the rtc device node represents a peripheral of
> + pm8941 SID = 0. The regulator device node represents a peripheral of
> + pm8941 SID = 1.
> + type: object
> +
> + properties:
> + interrupts:
> + maxItems: 4
> + description:
> + Interrupts are specified as a 4-tuple. For more information
Seems like minItems is also 4 though, so should be a const 4 instead?
But then this is about how many interrupts there are, which would be 1
or 2? It really can't be known in case there are many interrupts for a
child node so not sure we need to specify anything.
> + see bindings/spmi/qcom,spmi-pmic-arb.txt
> +
> + interrupt-names:
> + description:
> + Corresponding interrupt name to the interrupts property
I suspect we should drop these two properties and leave them up to the
binding for the function, like rtc, or regualator, etc.
> +
> + required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/spmi/spmi.h>
> +
> + spmi_bus {
> + compatible = "qcom,spmi-pmic-arb";
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + pmic@0 {
> + compatible = "qcom,pm8941";
> + reg = <0x0 SPMI_USID>;
> +
> + rtc {
> + compatible = "qcom,rtc";
> + interrupts = <0x0 0x61 0x1 0x1>;
> + interrupt-names = "alarm";
> + };
> + };
> +
> + pmic@1 {
> + compatible = "qcom,pm8941";
> + reg = <0x1 SPMI_USID>;
> +
> + regulator {
> + compatible = "qcom,regulator";
> + regulator-name = "8941_boost";
> + };
> + };
> + };
> +...
Powered by blists - more mailing lists