linux-kernel - [PATCH v4 02/15] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 31 Dec 2020 15:29:35 +0100
From:   Paul Kocialkowski <paul.kocialkowski@...tlin.com>
To:     linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-doc@...r.kernel.org, devel@...verdev.osuosl.org,
        linux-sunxi@...glegroups.com
Cc:     Yong Deng <yong.deng@...ewell.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Maxime Ripard <mripard@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Paul Kocialkowski <paul.kocialkowski@...tlin.com>,
        Jonathan Corbet <corbet@....net>,
        Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>,
        Helen Koike <helen.koike@...labora.com>,
        Dafna Hirschfeld <dafna.hirschfeld@...labora.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Hans Verkuil <hans.verkuil@...co.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        kevin.lhopital@...mail.com
Subject: [PATCH v4 02/15] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes

As some D-PHY controllers support both Rx and Tx mode, we need a way for
users to explicitly request one or the other. For instance, Rx mode can
be used along with MIPI CSI-2 while Tx mode can be used with MIPI DSI.

Introduce new MIPI D-PHY PHY submodes to use with PHY_MODE_MIPI_DPHY.
The default (zero value) is kept to Tx so only the rkisp1 driver, which
uses D-PHY in Rx mode, needs to be adapted.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Acked-by: Helen Koike <helen.koike@...labora.com>
---
 drivers/staging/media/rkisp1/rkisp1-isp.c |  3 ++-
 include/linux/phy/phy-mipi-dphy.h         | 13 +++++++++++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/rkisp1/rkisp1-isp.c b/drivers/staging/media/rkisp1/rkisp1-isp.c
index a9715b0b7264..f1167995688a 100644
--- a/drivers/staging/media/rkisp1/rkisp1-isp.c
+++ b/drivers/staging/media/rkisp1/rkisp1-isp.c
@@ -914,7 +914,8 @@ static int rkisp1_mipi_csi2_start(struct rkisp1_isp *isp,
 
 	phy_mipi_dphy_get_default_config(pixel_clock, isp->sink_fmt->bus_width,
 					 sensor->lanes, cfg);
-	phy_set_mode(sensor->dphy, PHY_MODE_MIPI_DPHY);
+	phy_set_mode_ext(cdev->dphy, PHY_MODE_MIPI_DPHY,
+			 PHY_MIPI_DPHY_SUBMODE_RX);
 	phy_configure(sensor->dphy, &opts);
 	phy_power_on(sensor->dphy);
 
diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h
index a877ffee845d..0f57ef46a8b5 100644
--- a/include/linux/phy/phy-mipi-dphy.h
+++ b/include/linux/phy/phy-mipi-dphy.h
@@ -6,6 +6,19 @@
 #ifndef __PHY_MIPI_DPHY_H_
 #define __PHY_MIPI_DPHY_H_
 
+/**
+ * enum phy_mipi_dphy_submode - MIPI D-PHY sub-mode
+ *
+ * A MIPI D-PHY can be used to transmit or receive data.
+ * Since some controllers can support both, the direction to enable is specified
+ * with the PHY sub-mode. Transmit is assumed by default with phy_set_mode.
+ */
+
+enum phy_mipi_dphy_submode {
+	PHY_MIPI_DPHY_SUBMODE_TX = 0,
+	PHY_MIPI_DPHY_SUBMODE_RX,
+};
+
 /**
  * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
  *
-- 
2.29.2