Message-ID: <50434a02-0fe0-50f3-1529-51ab8a0cc1f3@linaro.org>
Date:   Thu, 7 Jan 2021 09:28:07 -0500
From:   Thara Gopinath <thara.gopinath@...aro.org>
To:     Cristian Marussi <cristian.marussi@....com>,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc:     sudeep.holla@....com, lukasz.luba@....com,
        james.quinlan@...adcom.com, Jonathan.Cameron@...wei.com,
        f.fainelli@...il.com, etienne.carriere@...aro.org,
        vincent.guittot@...aro.org, souvik.chakravarty@....com
Subject: Re: [PATCH v4 37/37] firmware: arm_scmi: add dynamic scmi devices
 creation

Hi Christian,

On 1/6/21 3:16 PM, Cristian Marussi wrote:
> Having added the support for SCMI protocols as modules in order to let
> vendors extend the SCMI core with their own additions it seems odd to
> then force SCMI drivers built on top to use a static device table to
> declare their devices since this way any new SCMI drivers addition
> would need the core SCMI device table to be updated too.
> 
> Remove the static core device table and let SCMI drivers to simply declare
> which device/protocol pair they need at initialization time: the core will
> then take care to generate such devices dynamically during platform
> initialization or at module loading time, as long as the requested
> underlying protocol is defined in the DT.
> 
> Signed-off-by: Cristian Marussi <cristian.marussi@....com>
> ---
	
[snip]

>   
> -static inline void
> -scmi_create_protocol_devices(struct device_node *np, struct scmi_info *info,
> -			     int prot_id)
> +	for (; rdev; rdev = rdev->next)
> +		scmi_create_protocol_device(np, info, prot_id,
> +					    rdev->id_table->name);
> +}
> +
> +/**
> + * scmi_request_protocol_device  - Helper to request a device
> + *
> + * @id_table: A protocol/name pair descriptor for the device to be created.
> + *
> + * This helper let an SCMI driver request specific devices identified by the
> + * @id_table to be created for each active SCMI instance.
> + *
> + * The requested device name MUST NOT be already existent for any protocol;
> + * at first the freshly requested @id_table is annotated in the IDR table
> + * @scmi_requested_devices, then a matching device is created for each already
> + * active SCMI instance. (if any)
> + *
> + * This way the requested device is created straight-away for all the already
> + * initialized(probed) SCMI instances (handles) but it remains instead pending
> + * for creation if the requesting SCMI driver is loaded before some instance
> + * and related transports was available: when such late SCMI instance is probed
> + * it will take care to scan the list of pending requested devices and create
> + * those on its own (see @scmi_create_protocol_devices and its enclosing loop)
> + *
> + * Return: 0 on Success
> + */
> +int scmi_request_protocol_device(const struct scmi_device_id *id_table)
>   {
> -	int loop, cnt;
> +	int ret = 0;
> +	unsigned int id = 0;
> +	struct scmi_requested_dev *rdev, *proto_rdev = NULL;
> +	struct scmi_info *info;
>   
> -	for (loop = 0; loop < ARRAY_SIZE(devnames); loop++) {
> -		if (devnames[loop].protocol_id != prot_id)
> -			continue;
> +	pr_debug("Requesting SCMI device (%s) for protocol %x\n",
> +		 id_table->name, id_table->protocol_id);
>   
> -		for (cnt = 0; cnt < ARRAY_SIZE(devnames[loop].names); cnt++) {
> -			const char *name = devnames[loop].names[cnt];
> +	/*
> +	 * Search for the matching protocol rdev list and then search
> +	 * of any existent equally named device...fails if any duplicate found.
> +	 */
> +	mutex_lock(&scmi_requested_devices_mutex);
> +	idr_for_each_entry(&scmi_requested_devices, rdev, id) {
> +		if (rdev->id_table->protocol_id == id_table->protocol_id)
> +			proto_rdev = rdev;
> +		for (; rdev; rdev = rdev->next) {
> +			if (!strcmp(rdev->id_table->name, id_table->name)) {
> +				pr_err("Ignoring duplicate request [%d] %s\n",
> +				       rdev->id_table->protocol_id,
> +				       rdev->id_table->name);
> +				ret = -EINVAL;
> +				goto out;
> +			}
	Shouldn't there be proto_rdev = rdev here as well ?

> +		}
> +	}
> +
> +	/*
> +	 * No duplicate found for requested id_table, so let's create a new
> +	 * requested device entry for this new valid request.
> +	 */
> +	rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
> +	if (!rdev) {
> +		ret = -ENOMEM;
> +		goto out;
> +	}
> +	rdev->id_table = id_table;
> +
> +	/*
> +	 * Append the new requested device table descriptor to the head of the
> +	 * related protocol chain, eventually creating such chain if not already
> +	 * there.
> +	 */
> +	if (!proto_rdev) {
> +		ret = idr_alloc(&scmi_requested_devices, (void *)rdev,
> +				rdev->id_table->protocol_id,
> +				rdev->id_table->protocol_id + 1, GFP_KERNEL);
> +		if (ret != rdev->id_table->protocol_id) {
> +			pr_err("Failed to save SCMI device - ret:%d\n", ret);
> +			kfree(rdev);
> +			ret = -EINVAL;
> +			goto out;
> +		}
> +		ret = 0;
> +	} else {
> +		proto_rdev->next = rdev;
> +	}
> +
> +	/*
> +	 * Now effectively create and initialize the requested device for every
> +	 * already initialized SCMI instance which has registered the requested
> +	 * protocol as a valid active one: i.e. defined in DT and supported by
> +	 * current platform FW.
> +	 */
> +	mutex_lock(&scmi_list_mutex);
> +	list_for_each_entry(info, &scmi_list, node) {
> +		struct device_node *child;
> +
> +		child = idr_find(&info->active_protocols,
> +				 id_table->protocol_id);
> +		if (child) {
> +			struct scmi_device *sdev;
> +
> +			sdev = scmi_get_protocol_device(child, info,
> +							id_table->protocol_id,
> +							id_table->name);
> +			/* Set handle if not already set (device existed) */
> +			if (sdev && !sdev->handle)
> +				sdev->handle = scmi_handle_get_from_info(info);
> +		} else {
> +			dev_err(info->dev,
> +				"Failed. SCMI protocol %d not active.\n",
> +				id_table->protocol_id);
> +		}
> +	}
> +	mutex_unlock(&scmi_list_mutex);
> +
> +out:
> +	mutex_unlock(&scmi_requested_devices_mutex);
> +
> +	return ret;
> +}
> +
> +/**
> + * scmi_unrequest_protocol_device  - Helper to unrequest a device
> + *
> + * @id_table: A protocol/name pair descriptor for the device to be unrequested.
> + *
> + * An helper to let an SCMI driver release its request about devices; note that
> + * devices are created and initialized once the first SCMI driver request them
> + * but they destroyed only on SCMI core unloading/unbinding.
> + *
> + * The current SCMI transport layer uses such devices as internal references and
> + * as such they could be shared as same transport between multiple drivers so
> + * that cannot be safely destroyed till the whole SCMI stack is removed.
> + * (unless adding further burden of refcounting.)
> + */
> +void scmi_unrequest_protocol_device(const struct scmi_device_id *id_table)
> +{
> +	struct scmi_requested_dev *victim, *prev, *head;
> +
> +	pr_debug("Unrequesting SCMI device (%s) for protocol %x\n",
> +		 id_table->name, id_table->protocol_id);
>   
> -			if (name)
> -				scmi_create_protocol_device(np, info, prot_id,
> -							    name);
> +	head = idr_find(&scmi_requested_devices, id_table->protocol_id);
> +	if (!head)
> +		return;
> +
> +	/*
> +	 * Scan the protocol list of requested device name searching
> +	 * for the victim.
> +	 */
> +	victim = head;
> +	for (prev = victim; victim; prev = victim, victim = victim->next)

	The initial assignment for the for loop is wrong. With this when you 
break prev will be equal to victim. You want prev to be the one pointing 
to the victim. Or am I missing something?


-- 
Warm Regards
Thara

Powered by blists - more mailing lists