lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210115190201.9273b637a7f967e7e55bc740@bidouilliste.com>
Date:   Fri, 15 Jan 2021 19:02:01 +0100
From:   Emmanuel Vadot <manu@...ouilliste.com>
To:     Drew Fustini <drew@...gleboard.org>
Cc:     Tony Lindgren <tony@...mide.com>, Rob Herring <robh+dt@...nel.org>,
        linux-omap@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Linus Walleij <linus.walleij@...aro.org>,
        Haojian Zhuang <haojian.zhuang@...aro.org>,
        devicetree@...r.kernel.org, bcousson@...libre.com,
        Jason Kridner <jkridner@...gleboard.org>,
        Robert Nelson <robertcnelson@...il.com>
Subject: Re: [PATCH v4 2/2] ARM: dts: am33xx-l4: change #pinctrl-cells from
 1 to 2


 Hello Drew,

On Wed,  1 Jul 2020 03:33:20 +0200
Drew Fustini <drew@...gleboard.org> wrote:

> Increase #pinctrl-cells to 2 so that mux and conf be kept separate. This
> requires the AM33XX_PADCONF macro in omap.h to also be modified to keep pin
> conf and pin mux values separate.
> 
> Signed-off-by: Drew Fustini <drew@...gleboard.org>
> ---
>  arch/arm/boot/dts/am33xx-l4.dtsi   | 2 +-
>  include/dt-bindings/pinctrl/omap.h | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
> index a9cbefc80c0c..3141590e5889 100644
> --- a/arch/arm/boot/dts/am33xx-l4.dtsi
> +++ b/arch/arm/boot/dts/am33xx-l4.dtsi
> @@ -278,7 +278,7 @@ scm: scm@0 {
>  				am33xx_pinmux: pinmux@800 {
>  					compatible = "pinctrl-single";
>  					reg = <0x800 0x238>;
> -					#pinctrl-cells = <1>;
> +					#pinctrl-cells = <2>;
>  					pinctrl-single,register-width = <32>;
>  					pinctrl-single,function-mask = <0x7f>;
>  				};
> diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
> index 625718042413..2d2a8c737822 100644
> --- a/include/dt-bindings/pinctrl/omap.h
> +++ b/include/dt-bindings/pinctrl/omap.h
> @@ -65,7 +65,7 @@
>  #define DM814X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
>  #define DM816X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
>  #define AM33XX_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
> -#define AM33XX_PADCONF(pa, dir, mux)	OMAP_IOPAD_OFFSET((pa), 0x0800) ((dir) | (mux))
> +#define AM33XX_PADCONF(pa, conf, mux)	OMAP_IOPAD_OFFSET((pa), 0x0800) (conf) (mux)
>  
>  /*
>   * Macros to allow using the offset from the padconf physical address
> -- 
> 2.25.1

 Based on the bindings doc a value of 2 is only acceptable if one uses
pinctrl-single,bits but all the am33xx pins still uses
pinctrl-single,pins.
 I noticed this because this breaks FreeBSD when I tried with 5.9 dts.

-- 
Emmanuel Vadot <manu@...ouilliste.com> <manu@...ebsd.org>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ