Message-ID: <CAMuHMdVhwdq32krAxgo3UKdVkciwnhN3sRgHrbZ6xPkTvJgh2w@mail.gmail.com>
Date:   Wed, 20 Jan 2021 15:26:57 +0100
From:   Geert Uytterhoeven <geert@...ux-m68k.org>
To:     Saravana Kannan <saravanak@...gle.com>
Cc:     Marc Zyngier <maz@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Android Kernel Team <kernel-team@...roid.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Jisheng Zhang <Jisheng.Zhang@...aptics.com>,
        Kevin Hilman <khilman@...libre.com>,
        John Stultz <john.stultz@...aro.org>,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>
Subject: Re: [PATCH v1 5/5] driver core: Set fw_devlink=on by default

Hi Saravana,

On Wed, Jan 20, 2021 at 10:40 AM Geert Uytterhoeven
<geert@...ux-m68k.org> wrote:
> On Tue, Jan 19, 2021 at 10:51 PM Saravana Kannan <saravanak@...gle.com> wrote:
> > On Tue, Jan 19, 2021 at 10:08 AM Saravana Kannan <saravanak@...gle.com> wrote:
> > > On Tue, Jan 19, 2021 at 1:05 AM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> > > > On Mon, Jan 18, 2021 at 10:19 PM Saravana Kannan <saravanak@...gle.com> wrote:
> > > > > On Mon, Jan 18, 2021 at 11:16 AM Geert Uytterhoeven
> > > > > <geert@...ux-m68k.org> wrote:
> > > > > > On Mon, Jan 18, 2021 at 6:59 PM Marc Zyngier <maz@...nel.org> wrote:
> > > > > > > On 2021-01-18 17:39, Geert Uytterhoeven wrote:
> > > > > > > > On Fri, Dec 18, 2020 at 4:34 AM Saravana Kannan <saravanak@...gle.com>
> > > > > > > > wrote:
> > > > > > > >> Cyclic dependencies in some firmware was one of the last remaining
> > > > > > > >> reasons fw_devlink=on couldn't be set by default. Now that cyclic
> > > > > > > >> dependencies don't block probing, set fw_devlink=on by default.
> > > > > > > >>
> > > > > > > >> Setting fw_devlink=on by default brings a bunch of benefits
> > > > > > > >> (currently,
> > > > > > > >> only for systems with device tree firmware):
> > > > > > > >> * Significantly cuts down deferred probes.
> > > > > > > >> * Device probe is effectively attempted in graph order.
> > > > > > > >> * Makes it much easier to load drivers as modules without having to
> > > > > > > >>   worry about functional dependencies between modules (depmod is still
> > > > > > > >>   needed for symbol dependencies).
> > > > > > > >>
> > > > > > > >> If this patch prevents some devices from probing, it's very likely due
> > > > > > > >> to the system having one or more device drivers that "probe"/set up a
> > > > > > > >> device (DT node with compatible property) without creating a struct
> > > > > > > >> device for it.  If we hit such cases, the device drivers need to be
> > > > > > > >> fixed so that they populate struct devices and probe them like normal
> > > > > > > >> device drivers so that the driver core is aware of the devices and
> > > > > > > >> their
> > > > > > > >> status. See [1] for an example of such a case.
> > > > > > > >>
> > > > > > > >> [1] -
> > > > > > > >> https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com/
> > > > > > > >> Signed-off-by: Saravana Kannan <saravanak@...gle.com>
> > > > > > > >
> > > > > > > > Shimoda-san reported that next-20210111 and later fail to boot
> > > > > > > > on Renesas R-Car Gen3 platforms. No output is seen, unless earlycon
> > > > > > > > is enabled.
> > > > > > > >
> > > > > > > > I have bisected this to commit e590474768f1cc04 ("driver core: Set
> > > > > > > > fw_devlink=on by default").
> > > > > > >
> > > > > > > There is a tentative patch from Saravana here[1], which works around
> > > > > > > some issues on my RK3399 platform, and it'd be interesting to find
> > > > > > > out whether that helps on your system.
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > >          M.
> > > > > > >
> > > > > > > [1]
> > > > > > > https://lore.kernel.org/r/20210116011412.3211292-1-saravanak@google.com
> > > > > >
> > > > > > Thanks for the suggestion, but given no devices probe (incl. GPIO
> > > > > > providers), I'm afraid it won't help. [testing] Indeed.
> > > > > >
> > > > > > With the debug prints in device_links_check_suppliers enabled, and
> > > > > > some postprocessing, I get:
> > > > > >
> > > > > >     255 supplier e6180000.system-controller not ready
> > > > > >       9 supplier fe990000.iommu not ready
> > > > > >       9 supplier fe980000.iommu not ready
> > > > > >       6 supplier febd0000.iommu not ready
> > > > > >       6 supplier ec670000.iommu not ready
> > > > > >       3 supplier febe0000.iommu not ready
> > > > > >       3 supplier e7740000.iommu not ready
> > > > > >       3 supplier e6740000.iommu not ready
> > > > > >       3 supplier e65ee000.usb-phy not ready
> > > > > >       3 supplier e6570000.iommu not ready
> > > > > >       3 supplier e6054000.gpio not ready
> > > > > >       3 supplier e6053000.gpio not ready
> > > > > >
> > > > > > As everything is part of a PM Domain, the (lack of the) system controller
> > > > > > must be the culprit. What's wrong with it? It is registered very early in
> > > > > > the boot:
> > > > > >
> > > > > > [    0.142096] rcar_sysc_pd_init:442: of_genpd_add_provider_onecell() returned 0
> > > >
> > > > > Looks like you found the important logs. Can you please enable all
> > > > > these logs and send the early con logs as an attachment (so I don't
> > > > > need to deal with lines getting wrapped)?
> > > > > 1. The ones in device_links_check_suppliers()
> > > > > 2. The ones in device_link_add()
> > > > > 3. initcall_debug=1
> > > >
> > > > I have attached[*] the requested log.
> > > >
> > > > > That should help us figure out what's going on. Also, what's the DT
> > > > > that corresponds to one of the boards that see this issue?
> > > >
> > > > arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
> > > >
> > > > > Lastly, can you please pick up these 3 patches (some need clean up
> > > > > before they merge) to make sure it's not an issue being worked on from
> > > > > other bug reports?
> > > > > https://lore.kernel.org/lkml/20210116011412.3211292-1-saravanak@google.com/
> > > > > https://lore.kernel.org/lkml/20210115210159.3090203-1-saravanak@google.com/
> > > > > https://lore.kernel.org/lkml/20201218210750.3455872-1-saravanak@google.com/
> > > > >
> > > > > I have a strong hunch the 2nd one will fix your issues. fw_devlink can
> > > > > handle cyclic dependencies now (it basically reverts to
> > > > > fw_devlink=permissive mode for devices in the cycle), but it needs to
> > > > > "see" all the dependencies to know there's a cycle. So want to make
> > > > > sure it "sees" the "gpios" binding used all over some of the Renesas
> > > > > DT files.
> > > >
> > > > These patches don't help.
> > > > The 2nd one actually introduces a new failure:
> > > >
> > > >      OF: /soc/i2c@...d8000/gpio@...pcie-sata-switch-hog: could not get
> > > > #gpio-cells for /cpus/cpu@102
> > > >
> > > > Note that my issues don't seem to be GPIO-related at all.
>
> > I took a look at your logs. It looks like your guess is right. It's at
> > least one of the issues.
> >
> > You'll need to convert drivers/soc/renesas/rcar-sysc.c into a platform
> > driver. You already have a platform device created for it. So just go
> > ahead and probe it with a platform driver. See what Marek did here
> > [1].
> >
> > You probably had to implement it as an "initcall based driver"
> > because you had to play initcall chicken to make sure the PD hardware
> > was initialized before the consumers. With fw_devlink=on you won't
> > have to worry about that. As an added benefit of implementing a proper
> > platform driver, you can  actually implement runtime PM now, your
> > suspend/resume would be more robust, etc.
>
> On R-Car H1, the system controller driver needs to be active before
> secondary CPU setup, hence the early_initcall().
> platform_bus_init() is called after that, so this is gonna need a split
> initialization.  Or a dummy platform driver to make devlinks think
> everything is fine ;-)

Note that adding a dummy platform driver does work.

> So basically all producer DT drivers not using a platform (or e.g. i2c)
> driver are now broken?
> Including all clock drivers using CLK_OF_DECLARE()?

Oh, of_link_to_phandle() ignores device nodes where OF_POPULATED
is set, and of_clk_init() sets that flag.  So rcar-sysc should do so, too.
Patch sent.

>     $ git grep -L "\<[a-z0-9]*_driver\>" -- $(git grep -l
> "\.compatible\>") | wc -l
>     249
>
> (includes false positives)
>
> I doubt they'll all get fixed for v5.12, as we're already at rc4...

Still more than 100 drivers to fix?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Powered by blists - more mailing lists