lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAKmqyKPey8xSfWPuiwR__h-tQBBZ+WjtbC1aO8umSzpBWC=xkw@mail.gmail.com>
Date:   Sat, 23 Jan 2021 00:04:12 -0800
From:   Alistair Francis <alistair23@...il.com>
To:     Marco Felsch <m.felsch@...gutronix.de>
Cc:     Alistair Francis <alistair@...stair23.me>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        linux-input@...r.kernel.org, dl-linux-imx <linux-imx@....com>,
        Sascha Hauer <kernel@...gutronix.de>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 6/6] arch/arm: reMarkable2: Enable wacom_i2c

On Fri, Jan 22, 2021 at 7:32 AM Marco Felsch <m.felsch@...gutronix.de> wrote:
>
> Hi,
>
> thanks for the patch.
>
> On 21-01-20 22:56, Alistair Francis wrote:
> > Enable the wacom_i2c touchscreen for the reMarkable2.
> >
> > Signed-off-by: Alistair Francis <alistair@...stair23.me>
> > ---
> >  arch/arm/boot/dts/imx7d-remarkable2.dts | 41 +++++++++++++++++++++++++
> >  arch/arm/configs/imx_v6_v7_defconfig    |  1 +
>
> Those two changes should be splitted and the dts patch should be named:
> "ARM: dts: imx7d: remarkable2: add wacom digitizer device".
>
> >  2 files changed, 42 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > index fba55a0e028a..8052d884a5e5 100644
> > --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > @@ -150,6 +150,30 @@ &dma_apbh {
> >       status = "disabled";
> >  };
> >
> > +&i2c1 {
> > +     clock-frequency = <400000>;
> > +     pinctrl-names = "default", "sleep";
> > +     pinctrl-0 = <&pinctrl_i2c1>;
> > +     pinctrl-1 = <&pinctrl_i2c1>;
>
> No need to specify the sleep state if both are using the same pinctrl
> config.
>
> > +     status = "okay";
> > +
> > +     digitizer: wacom-i2c@9 {
>
> this should be:
>         wacom_digitizer: digitizer@9 {
>
> > +             pinctrl-names = "default", "sleep";
> > +             pinctrl-0 = <&pinctrl_wacom>;
> > +             pinctrl-1 = <&pinctrl_wacom>;
>
> Same here, sleep and default refer to the same state.
>
> > +             compatible = "wacom,wacom-i2c";
> > +             reg = <0x09>;
>
> compatible and reg are always the first to properties.
>
> > +             interrupt-parent = <&gpio1>;
> > +             interrupts = <1 2>;
>
> Please use defines.

I have addressed all your comments.

>
> > +             flip-tilt-x;
> > +             flip-tilt-y;
> > +             flip-pos-x;
> > +             flip-pos-y;
> > +             flip-distance;
> > +             vdd-supply = <&reg_digitizer>;
>
> Where is this regulator added?

It's already in the DT, it will be added with the initial commit
(which is currently on the list).

Alistair

>
> > +     };
> > +};
> > +
> >  &sdma {
> >       status = "okay";
> >  };
> > @@ -221,6 +245,16 @@ &wdog1 {
> >  };
> >
> >  &iomuxc_lpsr {
> > +     pinctrl_wacom: wacomgrp {
> > +             fsl,pins = <
> > +                     /*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0   0x00000074 /* WACOM RESET */
> > +                     MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1     0x00000034 /* WACOM INT */
> > +                     MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4     0x00000074 /* PDCTB */
> > +                     /*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5   0x00000014 /* FWE */
> > +                     /*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6   0x00000014 /* WACOM PWR ENABLE */
> > +             >;
> > +     };
>
> Pls, sort this alphabetical.
>
> > +
> >       pinctrl_digitizer_reg: digitizerreggrp {
> >               fsl,pins = <
> >                       /* DIGITIZER_PWR_EN */
> > @@ -236,6 +270,13 @@ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16        0x59
> >               >;
> >       };
> >
> > +     pinctrl_i2c1: i2c1grp {
> > +             fsl,pins = <
> > +                     MX7D_PAD_I2C1_SDA__I2C1_SDA             0x4000007f
> > +                     MX7D_PAD_I2C1_SCL__I2C1_SCL             0x4000007f
> > +             >;
> > +     };
> > +
> >       pinctrl_uart1: uart1grp {
> >               fsl,pins = <
> >                       MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX    0x79
> > diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> > index fa9229616106..2fc8dc6a8b0a 100644
> > --- a/arch/arm/configs/imx_v6_v7_defconfig
> > +++ b/arch/arm/configs/imx_v6_v7_defconfig
> > @@ -167,6 +167,7 @@ CONFIG_TOUCHSCREEN_DA9052=y
> >  CONFIG_TOUCHSCREEN_EGALAX=y
> >  CONFIG_TOUCHSCREEN_GOODIX=y
> >  CONFIG_TOUCHSCREEN_ILI210X=y
> > +CONFIG_TOUCHSCREEN_WACOM_I2C=y
> >  CONFIG_TOUCHSCREEN_MAX11801=y
> >  CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
> >  CONFIG_TOUCHSCREEN_EDT_FT5X06=y
> > --
> > 2.29.2
> >
> >
> >
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ