linux-kernel - [PATCH] USB: usblp: don't call usb_set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <YAy9kJhM/rG8EQXC@watson>
Date:   Sat, 23 Jan 2021 18:21:36 -0600
From:   Jeremy Figgins <kernel@...emyfiggins.com>
To:     zaitcev@...hat.com, gregkh@...uxfoundation.org,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        stern@...land.harvard.edu
Subject: [PATCH] USB: usblp: don't call usb_set_interface if there's a single
 alt

Some devices, such as the Winbond Electronics Corp. Virtual Com Port
(Vendor=0416, ProdId=5011), lockup when usb_set_interface() or
usb_clear_halt() are called. This device has only a single
altsetting, so it should not be necessary to call usb_set_interface().

Signed-off-by: Jeremy Figgins <kernel@...emyfiggins.com>
---
An alternative fix was submitted previously as:

USB: usblp: add USBLP_QUIRK_NO_SETF_INTF flag

and this superscedes that patch. This is a different approach, so
I submitted it as a new patch, rather than adding a v2 to the first
one; I hope that was the correct thing to do in this case.

 drivers/usb/class/usblp.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 134dc2005ce9..c9f6e9758288 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -1329,14 +1329,17 @@ static int usblp_set_protocol(struct usblp *usblp, int protocol)
 	if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL)
 		return -EINVAL;
 
-	alts = usblp->protocol[protocol].alt_setting;
-	if (alts < 0)
-		return -EINVAL;
-	r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
-	if (r < 0) {
-		printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
-			alts, usblp->ifnum);
-		return r;
+	/* Don't unnecessarily set the interface if there's a single alt. */
+	if (usblp->intf->num_altsetting > 1) {
+		alts = usblp->protocol[protocol].alt_setting;
+		if (alts < 0)
+			return -EINVAL;
+		r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
+		if (r < 0) {
+			printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
+				alts, usblp->ifnum);
+			return r;
+		}
 	}
 
 	usblp->bidir = (usblp->protocol[protocol].epread != NULL);
-- 
2.29.0