linux-kernel - Re: [PATCH v13 6/8] drm/mediatek: enable dither function

Open Source and information security mailing list archives

Message-ID: <CAJMQK-hCuvpfAKMiLzi6DiFHdnrMcJ_gCOdoAt_PjKtGmAo1_A@mail.gmail.com>
Date:   Sun, 31 Jan 2021 13:12:57 +0800
From:   Hsin-Yi Wang <hsinyi@...omium.org>
To:     Chun-Kuang Hu <chunkuang.hu@...nel.org>
Cc:     CK Hu <ck.hu@...iatek.com>, Philipp Zabel <p.zabel@...gutronix.de>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Mark Rutland <mark.rutland@....com>,
        DTML <devicetree@...r.kernel.org>,
        Yongqiang Niu <yongqiang.niu@...iatek.com>,
        David Airlie <airlied@...ux.ie>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        DRI Development <dri-devel@...ts.freedesktop.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        Daniel Vetter <daniel@...ll.ch>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v13 6/8] drm/mediatek: enable dither function

On Sun, Jan 31, 2021 at 11:40 AM Chun-Kuang Hu <chunkuang.hu@...nel.org> wrote:
>
> Hi, Hsin-Yi:
>
> Hsin-Yi Wang <hsinyi@...omium.org> 於 2021年1月29日 週五 下午5:23寫道：
> >
> > From: Yongqiang Niu <yongqiang.niu@...iatek.com>
> >
> > Enable dither function to improve the display quality for dither
> > supported bpc 4, 6, 8. For not supported bpc, use relay mode.
> >
> > Signed-off-by: Yongqiang Niu <yongqiang.niu@...iatek.com>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 ++++++++++++---
> >  1 file changed, 12 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > index ac2cb25620357..5761dd15eedf2 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > @@ -53,6 +53,7 @@
> >  #define DITHER_EN                              BIT(0)
> >  #define DISP_DITHER_CFG                                0x0020
> >  #define DITHER_RELAY_MODE                      BIT(0)
> > +#define DITHER_ENGINE_EN                       BIT(1)
> >  #define DISP_DITHER_SIZE                       0x0030
> >
> >  #define LUT_10BIT_MASK                         0x03ff
> > @@ -314,9 +315,17 @@ static void mtk_dither_config(struct device *dev, unsigned int w,
> >                               unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
> >  {
> >         struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
> > -
> > -       mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, DISP_DITHER_SIZE);
> > -       mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
> > +       bool valid_bpc = (bpc == 4 || bpc == 6 || bpc == 8);
> > +
> > +       mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> > +                     DISP_DITHER_SIZE);
> > +       if (valid_bpc)
> > +               mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc,
> > +                                     DISP_DITHER_CFG, DITHER_ENGINE_EN,
> > +                                     cmdq_pkt);
> > +       else
> > +               mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg,
> > +                             priv->regs, DISP_DITHER_CFG);
>
> od has relay mode,
>
> static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w,
>   unsigned int h, unsigned int vrefresh,
>   unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
> {
> mtk_ddp_write(cmdq_pkt, w << 16 | h, comp, DISP_OD_SIZE);
> mtk_ddp_write(cmdq_pkt, OD_RELAYMODE, comp, DISP_OD_CFG);
> mtk_dither_set(comp, bpc, DISP_OD_CFG, cmdq_pkt);
> }
>
> and it does not check valid bpc (I think drm core already set bpc to
> 4, 6, 8 or 0), so align implementation of mtk_dither_config() with
> mtk_od_config().
> gamma also has relay mode (refer to [1] page 689), but we need to
> enable gamma's gamma function, so we do not set gamma to relay mode.
> So I think maybe we could implement mtk_dither_config() as:
>
> mtk_dither_config()
> {
>         mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg,
> priv->regs, DISP_DITHER_SIZE);
>         mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg,
> priv->regs, DISP_DITHER_CFG);
>         mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc,
> DISP_DITHER_CFG, DITHER_ENGINE_EN, cmdq_pkt);
> }
>
> [1] https://www.96boards.org/documentation/consumer/mediatekx20/additional-docs/docs/MT6797_Register_Table_Part_2.pdf
>
> Regards,
> Chun-Kuang.
>
Hi CK,

I send the patch here:
https://patchwork.kernel.org/project/linux-mediatek/patch/20210131051058.3407985-1-hsinyi@chromium.org/
as others are already merged to the tree.

Thanks

> >  }
> >
> >  static void mtk_dither_start(struct device *dev)
> > --
> > 2.30.0.365.g02bc693789-goog
> >
> >
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives