linux-kernel - Re: [EXT] Re: [PATCH v2 01/12] fix: arm64: dts: replace wrong regulator on ap emmc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210211140227.GL1463@shell.armlinux.org.uk>
Date:   Thu, 11 Feb 2021 14:02:27 +0000
From:   Russell King - ARM Linux admin <linux@...linux.org.uk>
To:     Kostya Porotchkin <kostap@...vell.com>
Cc:     Jon Nettleton <jon@...id-run.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "sebastian.hesselbarth@...il.com" <sebastian.hesselbarth@...il.com>,
        "gregory.clement@...tlin.com" <gregory.clement@...tlin.com>,
        "andrew@...n.ch" <andrew@...n.ch>,
        "mw@...ihalf.com" <mw@...ihalf.com>,
        "jaz@...ihalf.com" <jaz@...ihalf.com>,
        Nadav Haklai <nadavh@...vell.com>,
        Stefan Chulski <stefanc@...vell.com>,
        Ben Peled <bpeled@...vell.com>
Subject: Re: [EXT] Re: [PATCH v2 01/12] fix: arm64: dts: replace wrong
 regulator on ap emmc

On Thu, Feb 11, 2021 at 01:57:25PM +0000, Kostya Porotchkin wrote:
> 
> > ----------------------------------------------------------------------
> > On Wed, Feb 10, 2021 at 04:09:38PM +0200, kostap@...vell.com wrote:
> > > From: Konstantin Porotchkin <kostap@...vell.com>
> > >
> > > Replace wrong regulator in AP0 eMMC definition on MacchiatoBIN board
> > > with 3.3V regulator.
> > > The MacchiatoBIN board has no 1.8V regulator connected to AP0 eMMC
> > > (ap0_sdhci0) interface.
> > 
> > There seems to be some variability between Macchiatobin versions according
> > to the schematics.
> > 
> > The VDDO_H supply is connected to the eMMC VCCQ pins, and is also
> > connected to the AP_VDDO_H pins. It is wired to the 1.8V regulator on rev 1.1
> > schematics, but hard-wired to the 3.3V regulator on rev 1.3 schematics.
> > 
> > This needs clarification from SolidRun before the patch can be accepted - was
> > VDDO_H ever wired to the 1.8V regulator on production hardware?
> > 
> [KP] I will try to find a relevant contact in SolidRun for get this issue clarified.

I've already added Jon Nettleton.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!