| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <13a79af7-bc00-e605-581f-12111a752d3e@siemens.com>
Date: Fri, 12 Feb 2021 20:31:27 +0100
From: Jan Kiszka <jan.kiszka@...mens.com>
To: Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Le Jin <le.jin@...mens.com>,
Bao Cheng Su <baocheng.su@...mens.com>
Subject: Re: [PATCH v2 0/4] arm64: Add TI AM65x-based IOT2050 boards
On 11.02.21 20:32, Jan Kiszka wrote:
> Changes in v2:
> - address board-specific issues found by kernel_verify_patch
> - remove dead l2-cache node from iot2050-basic DT
> - add binding for Siemens vendor prefix
> - factor out board bindings into separate patch
> - add missing device_type to common ti,am654-pcie-rc nodes
>
> Jan
>
> Jan Kiszka (4):
> dt-bindings: Add Siemens vendor prefix
> dt-bindings: arm: ti: Add bindings for Siemens IOT2050 boards
> arm64: dts: ti: Add support for Siemens IOT2050 boards
> arm64: dts: ti: k3-am65-main: Add device_type to pcie*_rc nodes
>
> .../devicetree/bindings/arm/ti/k3.yaml | 2 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/arm64/boot/dts/ti/Makefile | 2 +
> .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 679 ++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 +
> .../boot/dts/ti/k3-am6528-iot2050-basic.dts | 61 ++
> .../dts/ti/k3-am6548-iot2050-advanced.dts | 60 ++
> 7 files changed, 808 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
> create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
>
Forgot to include the requested boot log. Here it comes for the basic variant:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.11.0-rc7+ (jan@...f2u6c) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #113 SMP PREEMPT Thu Feb 11 21:26:46 CET 2021
[ 0.000000] Machine model: SIMATIC IOT2050 Basic
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002810000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@...00000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@...00000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@...00000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@...00000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x00000000a2200000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] On node 0 totalpages: 247296
[ 0.000000] DMA zone: 4096 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 247296 pages, LIFO batch:63
[ 0.000000] cma: Reserved 24 MiB at 0x00000000bc400000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 22 pages/cpu s49560 r8192 d32360 u90112
[ 0.000000] pcpu-alloc: s49560 r8192 d32360 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 243200
[ 0.000000] Kernel command line: root=PARTUUID=e4abca5c-738d-48cd-ac11-7e578c11d495 console=ttyS3,115200n8 earlycon=ns16550a,mmio32,0x02810000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),64k(pru0-fw),64k(pru1-fw),64k(rtu0-fw),64k(rtu1-fw),-@8m(ospi.rootfs) rw rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 926684K/989184K available (10560K kernel code, 1038K rwdata, 3976K rodata, 1600K init, 390K bss, 37924K reserved, 24576K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@...000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@...000000001820000: allocated 524288 Devices @81c00000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000081430000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000081440000
[ 0.000000] random: get_random_bytes called from start_kernel+0x350/0x4fc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000000] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008496] Console: colour dummy device 80x25
[ 0.013099] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023787] pid_max: default: 32768 minimum: 301
[ 0.028610] LSM: Security Framework initializing
[ 0.033388] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.040965] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.050789] rcu: Hierarchical SRCU implementation.
[ 0.056001] Platform MSI: msi-controller@...0000 domain created
[ 0.062216] PCI/MSI: /bus@...000/interrupt-controller@...0000/msi-controller@...0000 domain created
[ 0.071708] smp: Bringing up secondary CPUs ...
[ 0.085317] Detected VIPT I-cache on CPU1
[ 0.085362] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[ 0.085380] GICv3: CPU1: using allocated LPI pending table @0x0000000081450000
[ 0.085447] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.085569] smp: Brought up 1 node, 2 CPUs
[ 0.114965] SMP: Total of 2 processors activated.
[ 0.119780] CPU features: detected: 32-bit EL0 Support
[ 0.125057] CPU features: detected: CRC32 instructions
[ 0.142427] CPU: All CPU(s) started at EL2
[ 0.146659] alternatives: patching kernel code
[ 0.152297] devtmpfs: initialized
[ 0.162108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.172114] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.180084] pinctrl core: initialized pinctrl subsystem
[ 0.186608] NET: Registered protocol family 16
[ 0.192912] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.200273] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.208345] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.217012] thermal_sys: Registered thermal governor 'step_wise'
[ 0.217557] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.230706] ASID allocator initialised with 65536 entries
[ 0.263053] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.269951] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.276812] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.283668] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.294355] k3-chipinfo 43000014.chipid: Family:AM65X rev:SR1.0 JTAGID[0x0bb5a02f] Detected
[ 0.304023] iommu: Default domain type: Translated
[ 0.309537] SCSI subsystem initialized
[ 0.313584] usbcore: registered new interface driver usbfs
[ 0.319238] usbcore: registered new interface driver hub
[ 0.324700] usbcore: registered new device driver usb
[ 0.330305] mc: Linux media interface: v0.10
[ 0.334701] videodev: Linux video capture interface: v2.00
[ 0.340374] EDAC MC: Ver: 3.0.0
[ 0.344072] omap-mailbox 31f80000.mailbox: no available mbox devices found
[ 0.351157] omap-mailbox 31f81000.mailbox: no available mbox devices found
[ 0.358227] omap-mailbox 31f82000.mailbox: no available mbox devices found
[ 0.365296] omap-mailbox 31f83000.mailbox: no available mbox devices found
[ 0.372365] omap-mailbox 31f84000.mailbox: no available mbox devices found
[ 0.379434] omap-mailbox 31f85000.mailbox: no available mbox devices found
[ 0.386504] omap-mailbox 31f86000.mailbox: no available mbox devices found
[ 0.393571] omap-mailbox 31f87000.mailbox: no available mbox devices found
[ 0.400644] omap-mailbox 31f88000.mailbox: no available mbox devices found
[ 0.407712] omap-mailbox 31f89000.mailbox: no available mbox devices found
[ 0.414779] omap-mailbox 31f8a000.mailbox: no available mbox devices found
[ 0.421847] omap-mailbox 31f8b000.mailbox: no available mbox devices found
[ 0.429386] Advanced Linux Sound Architecture Driver Initialized.
[ 0.436472] clocksource: Switched to clocksource arch_sys_counter
[ 0.442937] VFS: Disk quotas dquot_6.6.0
[ 0.447006] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460347] NET: Registered protocol family 2
[ 0.465463] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.474077] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.482074] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.489640] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.496324] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.503131] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.510501] NET: Registered protocol family 1
[ 0.515412] RPC: Registered named UNIX socket transport module.
[ 0.521494] RPC: Registered udp transport module.
[ 0.526333] RPC: Registered tcp transport module.
[ 0.531148] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.537743] PCI: CLS 0 bytes, default 64
[ 0.542472] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.551900] Initialise system trusted keyrings
[ 0.556662] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.567752] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.574346] NFS: Registering the id_resolver key type
[ 0.579557] Key type id_resolver registered
[ 0.583840] Key type id_legacy registered
[ 0.588021] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.595143] 9p: Installing v9fs 9p2000 file system support
[ 0.644844] Key type asymmetric registered
[ 0.649049] Asymmetric key parser 'x509' registered
[ 0.654076] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.661743] io scheduler mq-deadline registered
[ 0.666395] io scheduler kyber registered
[ 0.672910] pinctrl-single 4301c000.pinctrl: 70 pins, size 280
[ 0.679413] pinctrl-single 11c000.pinctrl: 185 pins, size 740
[ 0.685431] pinctrl-single 11c2e8.pinctrl: 9 pins, size 36
[ 0.695652] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[ 0.702001] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[ 0.712187] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[ 0.733613] brd: module loaded
[ 0.744181] loop: module loaded
[ 0.750357] libphy: Fixed MDIO Bus: probed
[ 0.755258] tun: Universal TUN/TAP device driver, 1.6
[ 0.761173] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.767594] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.773709] sky2: driver version 1.30
[ 0.777988] VFIO - User Level meta-driver version: 0.3
[ 0.784801] usbcore: registered new interface driver usb-storage
[ 0.791493] i2c /dev entries driver
[ 0.796015] sdhci: Secure Digital Host Controller Interface driver
[ 0.802356] sdhci: Copyright(c) Pierre Ossman
[ 0.807138] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.814280] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.820536] ti-sci bus@...000:bus@...80000:bus@...40000:dmsc: invalid resource
[ 0.828091] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.834807] usbcore: registered new interface driver usbhid
[ 0.840518] usbhid: USB HID core driver
[ 0.846022] optee: probing for conduit method.
[ 0.850608] optee: revision 3.11
[ 0.851228] optee: initialized driver
[ 0.859624] NET: Registered protocol family 17
[ 0.864335] 9pnet: Installing 9P2000 support
[ 0.868772] Key type dns_resolver registered
[ 0.873423] registered taskstats version 1
[ 0.877625] Loading compiled-in X.509 certificates
[ 0.891629] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[ 0.898122] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[ 0.909334] ti-sci bus@...000:bus@...80000:bus@...40000:dmsc: invalid resource
[ 0.917109] ti-sci bus@...000:bus@...80000:bus@...40000:dmsc: ABI: 3.1 (firmware rev 0x0014 '20.8.5--v2020.08b (Terrific Lla')
[ 0.977963] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.008987] random: fast init done
[ 1.012808] pca953x 1-0020: supply vcc not found, using dummy regulator
[ 1.019696] pca953x 1-0020: using no AI
[ 1.024414] pca953x 1-0021: supply vcc not found, using dummy regulator
[ 1.031278] pca953x 1-0021: using no AI
[ 1.035951] pca953x 1-0025: supply vcc not found, using dummy regulator
[ 1.042828] pca953x 1-0025: using no AI
[ 1.047395] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.078186] rtc-pcf8563 2-0051: registered as rtc0
[ 1.083459] rtc-pcf8563 2-0051: setting system clock to 2021-02-11T20:30:32 UTC (1613075432)
[ 1.092743] omap_i2c 2000000.i2c: bus 2 rev0.12 at 400 kHz
[ 1.099345] omap_i2c 2010000.i2c: bus 3 rev0.12 at 400 kHz
[ 1.105871] omap_i2c 2020000.i2c: bus 4 rev0.12 at 400 kHz
[ 1.112779] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz
[ 1.118832] ti-sci-intr bus@...000:bus@...80000:bus@...40000:interrupt-controller2: Interrupt Router 156 domain created
[ 1.130062] ti-sci-intr bus@...000:interrupt-controller0: Interrupt Router 100 domain created
[ 1.138983] ti-sci-intr bus@...000:main-navss:interrupt-controller1: Interrupt Router 182 domain created
[ 1.149023] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 179 created
[ 1.169221] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,160] sci-dev-id:195
[ 1.179224] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: enabled
[ 1.185908] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[ 1.205592] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:818, gp-rings[304,464] sci-dev-id:187
[ 1.215687] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: enabled
[ 1.222368] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[ 1.231038] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 16, base_baud = 6000000) is a 8250
[ 1.241158] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 24, base_baud = 3000000) is a 8250
[ 1.250955] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 25, base_baud = 3000000) is a 8250
[ 1.259737] printk: console [ttyS3] enabled
[ 1.268187] printk: bootconsole [ns16550a0] disabled
[ 1.279792] tidss 4a00000.dss: WA for erratum i2000: YUV formats disabled
[ 1.300101] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.305677] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 1.313447] xhci-hcd xhci-hcd.0.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x0000000000010010
[ 1.322889] xhci-hcd xhci-hcd.0.auto: irq 672, io mem 0x04010000
[ 1.329239] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.337504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.344723] usb usb1: Product: xHCI Host Controller
[ 1.349607] usb usb1: Manufacturer: Linux 5.11.0-rc7+ xhci-hcd
[ 1.355439] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 1.360789] hub 1-0:1.0: USB hub found
[ 1.364570] hub 1-0:1.0: 1 port detected
[ 1.368754] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.374249] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 1.381911] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.388509] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.396682] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.404943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.412166] usb usb2: Product: xHCI Host Controller
[ 1.417043] usb usb2: Manufacturer: Linux 5.11.0-rc7+ xhci-hcd
[ 1.422872] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 1.428097] hub 2-0:1.0: USB hub found
[ 1.431871] hub 2-0:1.0: 1 port detected
[ 1.438938] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.444503] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 1.452260] xhci-hcd xhci-hcd.1.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x0000000000010010
[ 1.461701] xhci-hcd xhci-hcd.1.auto: irq 674, io mem 0x04030000
[ 1.467986] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.476281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.483508] usb usb3: Product: xHCI Host Controller
[ 1.488385] usb usb3: Manufacturer: Linux 5.11.0-rc7+ xhci-hcd
[ 1.494214] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 1.499537] hub 3-0:1.0: USB hub found
[ 1.503320] hub 3-0:1.0: 1 port detected
[ 1.507496] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.512992] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 1.520650] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.527221] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.535401] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.543673] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.550893] usb usb4: Product: xHCI Host Controller
[ 1.555770] usb usb4: Manufacturer: Linux 5.11.0-rc7+ xhci-hcd
[ 1.561600] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 1.566820] hub 4-0:1.0: USB hub found
[ 1.570597] hub 4-0:1.0: 1 port detected
[ 1.577329] mmc0: CQHCI version 5.10
[ 1.642185] keystone-pcie 5600000.pcie: host bridge /bus@...000/pcie@...0000 ranges:
[ 1.649995] keystone-pcie 5600000.pcie: IO 0x0018020000..0x001802ffff -> 0x0000000000
[ 1.658371] keystone-pcie 5600000.pcie: MEM 0x0018030000..0x001fffffff -> 0x0018030000
[ 1.666860] keystone-pcie 5600000.pcie: iATU unroll: enabled
[ 1.672521] keystone-pcie 5600000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[ 1.704488] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 1.856618] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.864795] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.932634] hub 1-1:1.0: USB hub found
[ 1.936415] hub 1-1:1.0: 4 ports detected
[ 2.600661] keystone-pcie 5600000.pcie: Phy link never came up
[ 2.606661] keystone-pcie 5600000.pcie: PCI host bridge to bus 0000:00
[ 2.613193] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.618680] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.624859] pci_bus 0000:00: root bus resource [mem 0x18030000-0x1fffffff]
[ 2.631764] pci 0000:00:00.0: [104c:b00c] type 01 class 0x060400
[ 2.637783] pci 0000:00:00.0: reg 0x10: [mem 0x05600000-0x056fffff]
[ 2.643121] mmc0: SDHCI controller on 4fa0000.sdhci [4fa0000.sdhci] using ADMA 64-bit
[ 2.644054] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 2.658702] pci 0000:00:00.0: supports D1
[ 2.662784] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.724062] pci 0000:00:00.0: BAR 0: assigned [mem 0x18100000-0x181fffff]
[ 2.730874] pci 0000:00:00.0: BAR 6: assigned [mem 0x18030000-0x1803ffff pref]
[ 2.738105] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.747083] ti-udma 285c0000.dma-controller: Channels: 96 (tchan: 48, rchan: 48, gp-rflow: 48)
[ 2.768172] mmc0: new high speed SDHC card at address 0001
[ 2.768844] ti-udma 31150000.dma-controller: Channels: 267 (tchan: 119, rchan: 148, gp-rflow: 150)
[ 2.774576] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 2.793842] mmcblk0: p1
[ 2.798100] tidss 4a00000.dss: WA for erratum i2000: YUV formats disabled
[ 2.807180] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 0
[ 3.425503] Console: switching to colour frame buffer device 128x48
[ 3.447638] tidss 4a00000.dss: [drm] fb0: tidssdrmfb frame buffer device
[ 3.458668] spi-nor spi7.0: w25q128 (16384 Kbytes)
[ 3.463518] 11 cmdlinepart partitions found on MTD device 47040000.spi.0
[ 3.470239] Creating 11 MTD partitions on "47040000.spi.0":
[ 3.475809] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[ 3.482637] 0x000000080000-0x000000280000 : "ospi.tispl"
[ 3.489040] 0x000000280000-0x000000680000 : "ospi.u-boot"
[ 3.495397] 0x000000680000-0x0000006a0000 : "ospi.env"
[ 3.501621] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[ 3.508356] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[ 3.514694] 0x0000007c0000-0x0000007d0000 : "pru0-fw"
[ 3.520780] 0x0000007d0000-0x0000007e0000 : "pru1-fw"
[ 3.526812] 0x0000007e0000-0x0000007f0000 : "rtu0-fw"
[ 3.532911] 0x0000007f0000-0x000000800000 : "rtu1-fw"
[ 3.538944] 0x000000800000-0x000001000000 : "ospi.rootfs"
[ 3.555855] debugfs: Directory 'pd:121' with parent 'pm_genpd' already present!
[ 3.563374] debugfs: Directory 'pd:120' with parent 'pm_genpd' already present!
[ 3.585944] ALSA device list:
[ 3.588928] No soundcards found.
[ 3.608678] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.618522] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 3.632595] devtmpfs: mounted
[ 3.636862] Freeing unused kernel memory: 1600K
[ 3.641585] Run /sbin/init as init process
[ 3.645686] with arguments:
[ 3.645690] /sbin/init
[ 3.645695] with environment:
[ 3.645698] HOME=/
[ 3.645702] TERM=linux
[ 4.340066] NET: Registered protocol family 10
[ 4.345602] Segment Routing with IPv6
[ 4.384426] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.406189] systemd[1]: Detected architecture arm64.
[ 4.449370] systemd[1]: Set hostname to <iot2050-debian>.
[ 4.780163] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 4.797263] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 5.039457] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.050371] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.059342] systemd[1]: Created slice User and Session Slice.
[ 5.080772] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.088035] systemd[1]: Listening on udev Control Socket.
[ 5.108864] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.134780] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 5.157035] systemd[1]: Listening on udev Kernel Socket.
[ 5.625938] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null). Quota mode: none.
[ 5.995598] systemd-journald[128]: Received request to flush runtime journal from PID 1
[ 7.066205] at24 2-0054: supply vcc not found, using dummy regulator
[ 7.074050] at24 2-0054: 1024 byte 24c08 EEPROM, writable, 16 bytes/write
[ 7.375215] pci-endpoint-test 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
[ 7.535480] cal 6f03000.cal: Neither port is configured, no point in staying up
[ 8.148142] k3_r5_rproc bus@...000:bus@...80000:r5fss@...00000: lockstep mode not permitted, force configuring for split-mode
[ 8.201607] platform 41000000.r5f: device does not have reserved memory regions, ret = -22
[ 8.221425] k3_r5_rproc bus@...000:bus@...80000:r5fss@...00000: reserved memory init failed, ret = -22
[ 8.254751] remoteproc remoteproc0: releasing 41000000.r5f
[ 8.261591] k3_r5_rproc bus@...000:bus@...80000:r5fss@...00000: k3_r5_cluster_rproc_init failed, ret = -22
[ 8.311507] k3_r5_rproc: probe of bus@...000:bus@...80000:r5fss@...00000 failed with error -22
[ 10.700503] random: crng init done
[ 10.703926] random: 7 urandom warning(s) missed due to ratelimiting
[ 33.844585] tps62363-vout: disabling
And this is for the advanced one:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.11.0-rc7+ (jan@...f2u6c) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #114 SMP PREEMPT Fri Feb 12 20:23:32 CET 2021
[ 0.000000] Machine model: SIMATIC IOT2050 Advanced
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002810000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@...00000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@...00000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@...00000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@...00000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x00000000a2200000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] On node 0 totalpages: 509440
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 509440 pages, LIFO batch:63
[ 0.000000] cma: Reserved 24 MiB at 0x00000000fe000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 22 pages/cpu s49560 r8192 d32360 u90112
[ 0.000000] pcpu-alloc: s49560 r8192 d32360 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 501248
[ 0.000000] Kernel command line: root=PARTUUID=5b41c2ce-baaf-4ead-ab35-bf49ecc9f0e9 console=ttyS3,115200n8 earlycon=ns16550a,mmio32,0x02810000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),64k(pru0-fw),64k(pru1-fw),64k(rtu0-fw),64k(rtu1-fw),-@8m(ospi.rootfs) rw rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1955108K/2037760K available (10560K kernel code, 1038K rwdata, 3976K rodata, 1600K init, 390K bss, 58076K reserved, 24576K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@...000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@...000000001820000: allocated 524288 Devices @81c00000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000081440000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000081450000
[ 0.000000] random: get_random_bytes called from start_kernel+0x350/0x4fc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000001] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008510] Console: colour dummy device 80x25
[ 0.013108] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023796] pid_max: default: 32768 minimum: 301
[ 0.028617] LSM: Security Framework initializing
[ 0.033401] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.040983] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.050834] rcu: Hierarchical SRCU implementation.
[ 0.056051] Platform MSI: msi-controller@...0000 domain created
[ 0.062271] PCI/MSI: /bus@...000/interrupt-controller@...0000/msi-controller@...0000 domain created
[ 0.071823] smp: Bringing up secondary CPUs ...
[ 0.085416] Detected VIPT I-cache on CPU1
[ 0.085458] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[ 0.085476] GICv3: CPU1: using allocated LPI pending table @0x0000000081460000
[ 0.085537] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.094689] Detected VIPT I-cache on CPU2
[ 0.094740] GICv3: CPU2: found redistributor 100 region 0:0x00000000018c0000
[ 0.094759] GICv3: CPU2: using allocated LPI pending table @0x0000000081470000
[ 0.094824] CPU2: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.103920] Detected VIPT I-cache on CPU3
[ 0.103945] GICv3: CPU3: found redistributor 101 region 0:0x00000000018e0000
[ 0.103957] GICv3: CPU3: using allocated LPI pending table @0x0000000081480000
[ 0.103994] CPU3: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.104138] smp: Brought up 1 node, 4 CPUs
[ 0.184244] SMP: Total of 4 processors activated.
[ 0.189062] CPU features: detected: 32-bit EL0 Support
[ 0.194337] CPU features: detected: CRC32 instructions
[ 0.213629] CPU: All CPU(s) started at EL2
[ 0.217873] alternatives: patching kernel code
[ 0.223686] devtmpfs: initialized
[ 0.233585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.243593] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.251633] pinctrl core: initialized pinctrl subsystem
[ 0.258154] NET: Registered protocol family 16
[ 0.264530] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.271939] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.280082] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.288714] thermal_sys: Registered thermal governor 'step_wise'
[ 0.289249] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.302459] ASID allocator initialised with 65536 entries
[ 0.335136] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.342031] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.348890] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.355747] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.367291] k3-chipinfo 43000014.chipid: Family:AM65X rev:SR1.0 JTAGID[0x0bb5a02f] Detected
[ 0.376978] iommu: Default domain type: Translated
[ 0.382318] SCSI subsystem initialized
[ 0.386366] usbcore: registered new interface driver usbfs
[ 0.392015] usbcore: registered new interface driver hub
[ 0.397480] usbcore: registered new device driver usb
[ 0.403068] mc: Linux media interface: v0.10
[ 0.407464] videodev: Linux video capture interface: v2.00
[ 0.413136] EDAC MC: Ver: 3.0.0
[ 0.416827] omap-mailbox 31f80000.mailbox: no available mbox devices found
[ 0.423931] omap-mailbox 31f81000.mailbox: no available mbox devices found
[ 0.431002] omap-mailbox 31f82000.mailbox: no available mbox devices found
[ 0.438072] omap-mailbox 31f83000.mailbox: no available mbox devices found
[ 0.445138] omap-mailbox 31f84000.mailbox: no available mbox devices found
[ 0.452208] omap-mailbox 31f85000.mailbox: no available mbox devices found
[ 0.459276] omap-mailbox 31f86000.mailbox: no available mbox devices found
[ 0.466345] omap-mailbox 31f87000.mailbox: no available mbox devices found
[ 0.473412] omap-mailbox 31f88000.mailbox: no available mbox devices found
[ 0.480482] omap-mailbox 31f89000.mailbox: no available mbox devices found
[ 0.487556] omap-mailbox 31f8a000.mailbox: no available mbox devices found
[ 0.494624] omap-mailbox 31f8b000.mailbox: no available mbox devices found
[ 0.502168] Advanced Linux Sound Architecture Driver Initialized.
[ 0.509250] clocksource: Switched to clocksource arch_sys_counter
[ 0.515689] VFS: Disk quotas dquot_6.6.0
[ 0.519761] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.533593] NET: Registered protocol family 2
[ 0.538731] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.547577] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.555819] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.563607] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.570489] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.577405] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.584917] NET: Registered protocol family 1
[ 0.589874] RPC: Registered named UNIX socket transport module.
[ 0.595954] RPC: Registered udp transport module.
[ 0.600794] RPC: Registered tcp transport module.
[ 0.605611] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.612207] PCI: CLS 0 bytes, default 64
[ 0.617270] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.626815] Initialise system trusted keyrings
[ 0.631588] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.642617] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.649202] NFS: Registering the id_resolver key type
[ 0.654419] Key type id_resolver registered
[ 0.658701] Key type id_legacy registered
[ 0.662871] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.669935] 9p: Installing v9fs 9p2000 file system support
[ 0.719428] Key type asymmetric registered
[ 0.723630] Asymmetric key parser 'x509' registered
[ 0.728656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.736380] io scheduler mq-deadline registered
[ 0.741026] io scheduler kyber registered
[ 0.747529] pinctrl-single 4301c000.pinctrl: 70 pins, size 280
[ 0.754044] pinctrl-single 11c000.pinctrl: 185 pins, size 740
[ 0.760087] pinctrl-single 11c2e8.pinctrl: 9 pins, size 36
[ 0.770390] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[ 0.776737] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[ 0.787143] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[ 0.809214] brd: module loaded
[ 0.820498] loop: module loaded
[ 0.826637] libphy: Fixed MDIO Bus: probed
[ 0.831552] tun: Universal TUN/TAP device driver, 1.6
[ 0.837481] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.843898] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.850010] sky2: driver version 1.30
[ 0.854301] VFIO - User Level meta-driver version: 0.3
[ 0.861072] usbcore: registered new interface driver usb-storage
[ 0.867750] i2c /dev entries driver
[ 0.872288] sdhci: Secure Digital Host Controller Interface driver
[ 0.878625] sdhci: Copyright(c) Pierre Ossman
[ 0.883409] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.890677] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.896933] ti-sci bus@...000:bus@...80000:bus@...40000:dmsc: invalid resource
[ 0.904489] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.911212] usbcore: registered new interface driver usbhid
[ 0.916918] usbhid: USB HID core driver
[ 0.922423] optee: probing for conduit method.
[ 0.927008] optee: revision 3.12
[ 0.927496] optee: initialized driver
[ 0.935831] NET: Registered protocol family 17
[ 0.940546] 9pnet: Installing 9P2000 support
[ 0.944978] Key type dns_resolver registered
[ 0.949614] registered taskstats version 1
[ 0.953817] Loading compiled-in X.509 certificates
[ 0.967738] k3-ringacc 2b800000.ringacc: Failed to get MSI domain
[ 0.974232] k3-ringacc 3c000000.ringacc: Failed to get MSI domain
[ 0.985895] ti-sci bus@...000:bus@...80000:bus@...40000:dmsc: invalid resource
[ 0.993493] ti-sci bus@...000:bus@...80000:bus@...40000:dmsc: ABI: 3.1 (firmware rev 0x0014 '20.8.5--v2020.08b (Terrific Lla')
[ 1.054359] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.085523] random: fast init done
[ 1.089563] pca953x 1-0020: supply vcc not found, using dummy regulator
[ 1.096480] pca953x 1-0020: using no AI
[ 1.101216] pca953x 1-0021: supply vcc not found, using dummy regulator
[ 1.108081] pca953x 1-0021: using no AI
[ 1.112755] pca953x 1-0025: supply vcc not found, using dummy regulator
[ 1.119621] pca953x 1-0025: using no AI
[ 1.124194] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.154921] rtc-pcf8563 2-0051: registered as rtc0
[ 1.160189] rtc-pcf8563 2-0051: setting system clock to 2021-02-12T19:27:36 UTC (1613158056)
[ 1.169446] omap_i2c 2000000.i2c: bus 2 rev0.12 at 400 kHz
[ 1.176012] omap_i2c 2010000.i2c: bus 3 rev0.12 at 400 kHz
[ 1.182497] omap_i2c 2020000.i2c: bus 4 rev0.12 at 400 kHz
[ 1.189346] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz
[ 1.195380] ti-sci-intr bus@...000:bus@...80000:bus@...40000:interrupt-controller2: Interrupt Router 156 domain created
[ 1.206608] ti-sci-intr bus@...000:interrupt-controller0: Interrupt Router 100 domain created
[ 1.215533] ti-sci-intr bus@...000:main-navss:interrupt-controller1: Interrupt Router 182 domain created
[ 1.225565] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 179 created
[ 1.245432] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,160] sci-dev-id:195
[ 1.255439] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: enabled
[ 1.262128] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[ 1.281881] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:818, gp-rings[304,464] sci-dev-id:187
[ 1.291977] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: enabled
[ 1.298660] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[ 1.307314] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 16, base_baud = 6000000) is a 8250
[ 1.317403] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 24, base_baud = 3000000) is a 8250
[ 1.326186] printk: console [ttyS3] enabled
[ 1.334648] printk: bootconsole [ns16550a0] disabled
[ 1.346229] tidss 4a00000.dss: WA for erratum i2000: YUV formats disabled
[ 1.366448] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.372012] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 1.379813] xhci-hcd xhci-hcd.0.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x0000000000010010
[ 1.389260] xhci-hcd xhci-hcd.0.auto: irq 672, io mem 0x04010000
[ 1.395591] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.403857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.411081] usb usb1: Product: xHCI Host Controller
[ 1.415957] usb usb1: Manufacturer: Linux 5.11.0-rc7+ xhci-hcd
[ 1.421797] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 1.427135] hub 1-0:1.0: USB hub found
[ 1.430920] hub 1-0:1.0: 1 port detected
[ 1.435125] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.440621] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 1.448285] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.454860] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.463031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.471293] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.478513] usb usb2: Product: xHCI Host Controller
[ 1.483395] usb usb2: Manufacturer: Linux 5.11.0-rc7+ xhci-hcd
[ 1.489234] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 1.494456] hub 2-0:1.0: USB hub found
[ 1.498232] hub 2-0:1.0: 1 port detected
[ 1.505178] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.510709] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 1.518471] xhci-hcd xhci-hcd.1.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x0000000000010010
[ 1.527918] xhci-hcd xhci-hcd.1.auto: irq 674, io mem 0x04030000
[ 1.534223] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.542514] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.549736] usb usb3: Product: xHCI Host Controller
[ 1.554612] usb usb3: Manufacturer: Linux 5.11.0-rc7+ xhci-hcd
[ 1.560441] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 1.565704] hub 3-0:1.0: USB hub found
[ 1.569486] hub 3-0:1.0: 1 port detected
[ 1.573656] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.579153] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 1.586816] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.593388] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.601561] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.609834] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.617056] usb usb4: Product: xHCI Host Controller
[ 1.621933] usb usb4: Manufacturer: Linux 5.11.0-rc7+ xhci-hcd
[ 1.627762] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 1.632989] hub 4-0:1.0: USB hub found
[ 1.636765] hub 4-0:1.0: 1 port detected
[ 1.643928] mmc0: CQHCI version 5.10
[ 1.643927] mmc1: CQHCI version 5.10
[ 1.692448] mmc0: SDHCI controller on 4f80000.sdhci [4f80000.sdhci] using ADMA 64-bit
[ 1.702933] keystone-pcie 5600000.pcie: host bridge /bus@...000/pcie@...0000 ranges:
[ 1.710732] keystone-pcie 5600000.pcie: IO 0x0018020000..0x001802ffff -> 0x0000000000
[ 1.719099] keystone-pcie 5600000.pcie: MEM 0x0018030000..0x001fffffff -> 0x0018030000
[ 1.727609] keystone-pcie 5600000.pcie: iATU unroll: enabled
[ 1.733271] keystone-pcie 5600000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[ 1.773263] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 1.789197] mmc0: Command Queue Engine enabled
[ 1.793669] mmc0: new HS200 MMC card at address 0001
[ 1.799324] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[ 1.804116] mmcblk0boot0: mmc0:0001 S0J56X partition 1 31.5 MiB
[ 1.810304] mmcblk0boot1: mmc0:0001 S0J56X partition 2 31.5 MiB
[ 1.816428] mmcblk0rpmb: mmc0:0001 S0J56X partition 3 4.00 MiB, chardev (245:0)
[ 1.925418] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.933625] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.999005] hub 1-1:1.0: USB hub found
[ 2.002831] hub 1-1:1.0: 4 ports detected
[ 2.349255] usb 1-1.4: new full-speed USB device number 3 using xhci-hcd
[ 2.454888] usb 1-1.4: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[ 2.463243] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.470550] usb 1-1.4: Product: CP2102N USB to UART Bridge Controller
[ 2.476987] usb 1-1.4: Manufacturer: Silicon Labs
[ 2.481692] usb 1-1.4: SerialNumber: dcfb480fd22aea11ba71bcfad0cd4f36
[ 2.714073] mmc1: SDHCI controller on 4fa0000.sdhci [4fa0000.sdhci] using ADMA 64-bit
[ 2.741343] keystone-pcie 5600000.pcie: Phy link never came up
[ 2.747365] keystone-pcie 5600000.pcie: PCI host bridge to bus 0000:00
[ 2.753907] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.755552] mmc1: new high speed SDHC card at address 0001
[ 2.759397] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.765618] mmcblk1: mmc1:0001 EB1QT 29.8 GiB
[ 2.771064] pci_bus 0000:00: root bus resource [mem 0x18030000-0x1fffffff]
[ 2.782183] mmcblk1: p1
[ 2.782435] pci 0000:00:00.0: [104c:b00c] type 01 class 0x060400
[ 2.790926] pci 0000:00:00.0: reg 0x10: [mem 0x05600000-0x056fffff]
[ 2.797203] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 2.803960] pci 0000:00:00.0: supports D1
[ 2.807973] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.869181] pci 0000:00:00.0: BAR 0: assigned [mem 0x18100000-0x181fffff]
[ 2.875982] pci 0000:00:00.0: BAR 6: assigned [mem 0x18030000-0x1803ffff pref]
[ 2.883209] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.892353] ti-udma 285c0000.dma-controller: Channels: 96 (tchan: 48, rchan: 48, gp-rflow: 48)
[ 2.913768] ti-udma 31150000.dma-controller: Channels: 267 (tchan: 119, rchan: 148, gp-rflow: 150)
[ 2.936853] tidss 4a00000.dss: WA for erratum i2000: YUV formats disabled
[ 2.946023] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 0
[ 2.953641] tidss 4a00000.dss: [drm] Cannot find any crtc or sizes
[ 2.964356] spi-nor spi7.0: w25q128 (16384 Kbytes)
[ 2.969191] 11 cmdlinepart partitions found on MTD device 47040000.spi.0
[ 2.975891] Creating 11 MTD partitions on "47040000.spi.0":
[ 2.981463] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[ 2.988251] 0x000000080000-0x000000280000 : "ospi.tispl"
[ 2.994640] 0x000000280000-0x000000680000 : "ospi.u-boot"
[ 3.001158] 0x000000680000-0x0000006a0000 : "ospi.env"
[ 3.007340] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[ 3.014123] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[ 3.020507] 0x0000007c0000-0x0000007d0000 : "pru0-fw"
[ 3.026589] 0x0000007d0000-0x0000007e0000 : "pru1-fw"
[ 3.032699] 0x0000007e0000-0x0000007f0000 : "rtu0-fw"
[ 3.038826] 0x0000007f0000-0x000000800000 : "rtu1-fw"
[ 3.044934] 0x000000800000-0x000001000000 : "ospi.rootfs"
[ 3.061702] debugfs: Directory 'pd:121' with parent 'pm_genpd' already present!
[ 3.069108] debugfs: Directory 'pd:120' with parent 'pm_genpd' already present!
[ 3.092768] ALSA device list:
[ 3.095770] No soundcards found.
[ 3.115490] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.125351] VFS: Mounted root (ext4 filesystem) on device 179:97.
[ 3.139299] devtmpfs: mounted
[ 3.143384] Freeing unused kernel memory: 1600K
[ 3.148102] Run /sbin/init as init process
[ 3.152205] with arguments:
[ 3.152209] /sbin/init
[ 3.152213] with environment:
[ 3.152217] HOME=/
[ 3.152221] TERM=linux
[ 3.846631] NET: Registered protocol family 10
[ 3.852223] Segment Routing with IPv6
[ 3.890207] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.911981] systemd[1]: Detected architecture arm64.
[ 3.962185] systemd[1]: Set hostname to <iot2050-debian>.
[ 4.176337] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 4.193481] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 4.432797] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.443728] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.451143] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.473434] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 4.485063] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.494680] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 4.517678] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.541368] systemd[1]: Reached target Remote File Systems.
[ 4.890858] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null). Quota mode: none.
[ 5.302022] systemd-journald[148]: Received request to flush runtime journal from PID 1
[ 5.887034] at24 2-0054: supply vcc not found, using dummy regulator
[ 5.900548] at24 2-0054: 1024 byte 24c08 EEPROM, writable, 16 bytes/write
[ 6.032708] pci-endpoint-test 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
[ 6.104255] cal 6f03000.cal: Neither port is configured, no point in staying up
[ 6.214760] usbcore: registered new interface driver cp210x
[ 6.228193] usbserial: USB Serial support registered for cp210x
[ 6.239597] cp210x 1-1.4:1.0: cp210x converter detected
[ 6.253751] usb 1-1.4: cp210x converter now attached to ttyUSB0
[ 6.445964] platform 41000000.r5f: device does not have reserved memory regions, ret = -22
[ 6.468107] k3_r5_rproc bus@...000:bus@...80000:r5fss@...00000: reserved memory init failed, ret = -22
[ 6.481711] remoteproc remoteproc0: releasing 41000000.r5f
[ 6.487940] k3_r5_rproc bus@...000:bus@...80000:r5fss@...00000: k3_r5_cluster_rproc_init failed, ret = -22
[ 6.500350] k3_r5_rproc: probe of bus@...000:bus@...80000:r5fss@...00000 failed with error -22
[ 9.853279] random: crng init done
[ 9.856706] random: 7 urandom warning(s) missed due to ratelimiting
[ 13.150202] tidss 4a00000.dss: [drm] Cannot find any crtc or sizes
[ 33.885326] tps62363-vout: disabling
At this chance the note that booting mainline requires WiP mainline
firmware which can be built from [1] already. But installing it is at
own risk until we released it officially.
Jan
[1] https://github.com/siemens/meta-iot2050/tree/master/recipes-bsp/u-boot
(./kas-container build kas-iot2050-boot-advanced.yml:kas/opt/upstream.yml)
--
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux
Powered by blists - more mailing lists