linux-kernel - AW: [PATCH v4] mfd: da9063: Support SMBus and I2C mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 19 Feb 2021 16:39:01 +0000
From:   "Jonas Mark (BT-FIR/ENG1-Grb)" <Mark.Jonas@...bosch.com>
To:     Adam Thomson <Adam.Thomson.Opensource@...semi.com>,
        Support Opensource <Support.Opensource@...semi.com>,
        Lee Jones <lee.jones@...aro.org>
CC:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
        Steve Twiss <stwiss.opensource@...semi.com>,
        "marek.vasut@...il.com" <marek.vasut@...il.com>,
        "RUAN Tingquan (BT-FIR/ENG1-Zhu)" <Tingquan.Ruan@...bosch.com>,
        "Streidl Hubert (BT-FIR/ENG1-Grb)" <Hubert.Streidl@...bosch.com>,
        Wolfram Sang <wsa@...nel.org>,
        "Jonas Mark (BT-FIR/ENG1-Grb)" <Mark.Jonas@...bosch.com>
Subject: AW: [PATCH v4] mfd: da9063: Support SMBus and I2C mode

Hi,

> > From: Hubert Streidl <hubert.streidl@...bosch.com>
> >
> > By default the PMIC DA9063 2-wire interface is SMBus compliant. This
> > means the PMIC will automatically reset the interface when the clock
> > signal ceases for more than the SMBus timeout of 35 ms.
> >
> > If the I2C driver / device is not capable of creating atomic I2C
> > transactions, a context change can cause a ceasing of the clock signal.
> > This can happen if for example a real-time thread is scheduled. Then
> > the DA9063 in SMBus mode will reset the 2-wire interface. Subsequently
> > a write message could end up in the wrong register. This could cause
> > unpredictable system behavior.
> >
> > The DA9063 PMIC also supports an I2C compliant mode for the 2-wire
> > interface. This mode does not reset the interface when the clock
> > signal ceases. Thus the problem depicted above does not occur.
> >
> > This patch tests for the bus functionality "I2C_FUNC_I2C". It can
> > reasonably be assumed that the bus cannot obey SMBus timings if this
> > functionality is set. SMBus commands most probably are emulated in
> > this case which is prone to the latency issue described above.
> >
> > This patch enables the I2C bus mode if I2C_FUNC_I2C is set or
> > otherwise enables the SMBus mode for a native SMBus controller which
> > doesn't have I2C_FUNC_I2C set.
> >
> > Signed-off-by: Hubert Streidl <hubert.streidl@...bosch.com>
> > Signed-off-by: Mark Jonas <mark.jonas@...bosch.com>
> 
> Thanks for your efforts. Looks sensible to me, so:
> 
> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@...semi.com>

Is the patch already on the way upstream?

Is https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/log/?h=for-mfd-next the right place to watch for mainlining progress?

Thanks,
Mark