| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPTae5KHy5jfiSnfD9oNjC5Gf_-R-WWHmvRHC1KVs1WKzH4oKA@mail.gmail.com>
Date: Thu, 25 Feb 2021 02:13:01 -0800
From: Badhri Jagan Sridharan <badhri@...gle.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Kyle Tso <kyletso@...gle.com>, USB <linux-usb@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>, stable@...r.kernel.org
Subject: Re: [PATCH v2] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V
before toggling
On Wed, Feb 24, 2021 at 9:46 PM Badhri Jagan Sridharan
<badhri@...gle.com> wrote:
>
> On Fri, Feb 19, 2021 at 7:56 AM Guenter Roeck <linux@...ck-us.net> wrote:
> >
> > On 2/19/21 1:04 AM, Badhri Jagan Sridharan wrote:
> > > When vbus auto discharge is enabled, TCPM can sometimes be faster than
> > > the TCPC i.e. TCPM can go ahead and move the port to unattached state
> > > (involves disabling vbus auto discharge) before TCPC could effectively
> > > discharge vbus to VSAFE0V. This leaves vbus with residual charge and
> > > increases the decay time which prevents tsafe0v from being met.
> > > This change introduces a new state VBUS_DISCHARGE where the TCPM waits
> > > for a maximum of tSafe0V(max) for vbus to discharge to VSAFE0V before
> > > transitioning to unattached state and re-enable toggling. If vbus
> > > discharges to vsafe0v sooner, then, transition to unattached state
> > > happens right away.
> > >
> > > Also, while in SNK_READY, when auto discharge is enabled, drive
> > > disconnect based on vbus turning off instead of Rp disappearing on
> > > CC pins. Rp disappearing on CC pins is almost instanteous compared
> > > to vbus decay.
> > >
> > > Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto
> > > Discharge disconnect support")
> > > Signed-off-by: Badhri Jagan Sridharan <badhri@...gle.com>
> > > ---
> > > Changes since V1:
> > > - Add Fixes tag
> > > ---
> > > drivers/usb/typec/tcpm/tcpm.c | 60 +++++++++++++++++++++++++++++++----
> > > 1 file changed, 53 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> > > index be0b6469dd3d..0ed71725980f 100644
> > > --- a/drivers/usb/typec/tcpm/tcpm.c
> > > +++ b/drivers/usb/typec/tcpm/tcpm.c
> > > @@ -62,6 +62,8 @@
> > > S(SNK_TRANSITION_SINK_VBUS), \
> > > S(SNK_READY), \
> > > \
> > > + S(VBUS_DISCHARGE), \
> > > + \
> > > S(ACC_UNATTACHED), \
> > > S(DEBUG_ACC_ATTACHED), \
> > > S(AUDIO_ACC_ATTACHED), \
> > > @@ -438,6 +440,9 @@ struct tcpm_port {
> > > enum tcpm_ams next_ams;
> > > bool in_ams;
> > >
> > > + /* Auto vbus discharge state */
> > > + bool auto_vbus_discharge_enabled;
> > > +
> > > #ifdef CONFIG_DEBUG_FS
> > > struct dentry *dentry;
> > > struct mutex logbuffer_lock; /* log buffer access lock */
> > > @@ -3413,6 +3418,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
> > > if (port->tcpc->enable_auto_vbus_discharge) {
> > > ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, true);
> > > tcpm_log_force(port, "enable vbus discharge ret:%d", ret);
> > > + if (!ret)
> > > + port->auto_vbus_discharge_enabled = true;
> > > }
> > >
> > > ret = tcpm_set_roles(port, true, TYPEC_SOURCE, tcpm_data_role_for_source(port));
> > > @@ -3495,6 +3502,8 @@ static void tcpm_reset_port(struct tcpm_port *port)
> > > if (port->tcpc->enable_auto_vbus_discharge) {
> > > ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, false);
> > > tcpm_log_force(port, "Disable vbus discharge ret:%d", ret);
> > > + if (!ret)
> > > + port->auto_vbus_discharge_enabled = false;
> > > }
> > > port->in_ams = false;
> > > port->ams = NONE_AMS;
> > > @@ -3568,6 +3577,8 @@ static int tcpm_snk_attach(struct tcpm_port *port)
> > > tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, VSAFE5V);
> > > ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, true);
> > > tcpm_log_force(port, "enable vbus discharge ret:%d", ret);
> > > + if (!ret)
> > > + port->auto_vbus_discharge_enabled = true;
> > > }
> > >
> > > ret = tcpm_set_roles(port, true, TYPEC_SINK, tcpm_data_role_for_sink(port));
> > > @@ -3684,6 +3695,12 @@ static void run_state_machine(struct tcpm_port *port)
> > > switch (port->state) {
> > > case TOGGLING:
> > > break;
> > > + case VBUS_DISCHARGE:
> > > + if (port->port_type == TYPEC_PORT_SRC)
> > > + tcpm_set_state(port, SRC_UNATTACHED, PD_T_SAFE_0V);
> > > + else
> > > + tcpm_set_state(port, SNK_UNATTACHED, PD_T_SAFE_0V);
> > > + break;
> > > /* SRC states */
> > > case SRC_UNATTACHED:
> > > if (!port->non_pd_role_swap)
> > > @@ -4669,7 +4686,9 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
> > > case SRC_READY:
> > > if (tcpm_port_is_disconnected(port) ||
> > > !tcpm_port_is_source(port)) {
> > > - if (port->port_type == TYPEC_PORT_SRC)
> > > + if (port->auto_vbus_discharge_enabled && !port->vbus_vsafe0v)
> > > + tcpm_set_state(port, VBUS_DISCHARGE, 0);
> > > + else if (port->port_type == TYPEC_PORT_SRC)
> > > tcpm_set_state(port, SRC_UNATTACHED, 0);
> > > else
> > > tcpm_set_state(port, SNK_UNATTACHED, 0);
> >
> > Unless I am missing something, the new state is only used to set the
> > PD_T_SAFE_0V timeout. Is it really necessary/useful to add a new state
> > just for that, while keeping the rest of if/else statements ?
> > Personally I would prefer something like
> > timeout = (port->auto_vbus_discharge_enabled && !port->vbus_vsafe0v) ? PD_T_SAFE_0V : 0;
> > if (port->port_type == TYPEC_PORT_SRC)
> > tcpm_set_state(port, SRC_UNATTACHED, timeout);
> > else
> > tcpm_set_state(port, SNK_UNATTACHED, timeout);
> >
> Yes this should be OK as well. I was thinking it would be more
> clearer during debug if there
> was a separate state altogether, but, looks like we should be fine.
> Implementing/Validating it now. Will send a follow up version today.
Just sent out the V3 version of the patch.
>
> > In this context, any idea why port_type==TYPEC_PORT_DRP results in
> > SNK_UNATTACHED state ? That seems a bit odd.
>
> This comes from the patch here:
> https://lore.kernel.org/r/1582128343-22438-1-git-send-email-jun.li@nxp.com
>
> Looks reasonable to me as tcpm_*_detach functions call tcpm_detach so
> teardown should
> happen anyways.
>
> static void tcpm_snk_detach(struct tcpm_port *port)
> {
> tcpm_detach(port);
> }
>
>
> static void tcpm_src_detach(struct tcpm_port *port)
> {
> tcpm_detach(port);
> }
>
> Thanks,
> Badhri
>
> >
> > Guenter
> >
> > > @@ -4703,7 +4722,18 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
> > > tcpm_set_state(port, SNK_DEBOUNCED, 0);
> > > break;
> > > case SNK_READY:
> > > - if (tcpm_port_is_disconnected(port))
> > > + /*
> > > + * When set_auto_vbus_discharge_threshold is enabled, CC pins go
> > > + * away before vbus decays to disconnect threshold. Allow
> > > + * disconnect to be driven by vbus disconnect when auto vbus
> > > + * discharge is enabled.
> > > + *
> > > + * EXIT condition is based primarily on vbus disconnect and CC is secondary.
> > > + * "A port that has entered into USB PD communications with the Source and
> > > + * has seen the CC voltage exceed vRd-USB may monitor the CC pin to detect
> > > + * cable disconnect in addition to monitoring VBUS.
> > > + */
> > > + if (!port->auto_vbus_discharge_enabled && tcpm_port_is_disconnected(port))
> > > tcpm_set_state(port, unattached_state(port), 0);
> > > else if (!port->pd_capable &&
> > > (cc1 != old_cc1 || cc2 != old_cc2))
> > > @@ -4803,9 +4833,16 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
> > > */
> > > break;
> > >
> > > + case VBUS_DISCHARGE:
> > > + /* Do nothing. Waiting for vsafe0v signal */
> > > + break;
> > > default:
> > > - if (tcpm_port_is_disconnected(port))
> > > - tcpm_set_state(port, unattached_state(port), 0);
> > > + if (tcpm_port_is_disconnected(port)) {
> > > + if (port->auto_vbus_discharge_enabled && !port->vbus_vsafe0v)
> > > + tcpm_set_state(port, VBUS_DISCHARGE, 0);
> > > + else
> > > + tcpm_set_state(port, unattached_state(port), 0);
> > > + }
> > > break;
> > > }
> > > }
> > > @@ -4988,9 +5025,12 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port)
> > > break;
> > >
> > > default:
> > > - if (port->pwr_role == TYPEC_SINK &&
> > > - port->attached)
> > > - tcpm_set_state(port, SNK_UNATTACHED, 0);
> > > + if (port->pwr_role == TYPEC_SINK && port->attached) {
> > > + if (port->auto_vbus_discharge_enabled && !port->vbus_vsafe0v)
> > > + tcpm_set_state(port, VBUS_DISCHARGE, 0);
> > > + else
> > > + tcpm_set_state(port, SNK_UNATTACHED, 0);
> > > + }
> > > break;
> > > }
> > > }
> > > @@ -5012,6 +5052,12 @@ static void _tcpm_pd_vbus_vsafe0v(struct tcpm_port *port)
> > > tcpm_set_state(port, tcpm_try_snk(port) ? SNK_TRY : SRC_ATTACHED,
> > > PD_T_CC_DEBOUNCE);
> > > break;
> > > + case VBUS_DISCHARGE:
> > > + if (port->port_type == TYPEC_PORT_SRC)
> > > + tcpm_set_state(port, SRC_UNATTACHED, 0);
> > > + else
> > > + tcpm_set_state(port, SNK_UNATTACHED, 0);
> > > + break;
> > > default:
> > > break;
> > > }
> > >
> >
Powered by blists - more mailing lists