[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210225143727.3912204-2-arnd@kernel.org>
Date: Thu, 25 Feb 2021 15:37:10 +0100
From: Arnd Bergmann <arnd@...nel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Arnd Bergmann <arnd@...db.de>, Rob Herring <robh@...nel.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>,
Yicong Yang <yangyicong@...ilicon.com>,
Jiaxun Yang <jiaxun.yang@...goat.com>,
Daire McNamara <daire.mcnamara@...rochip.com>,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] PCI: controller: avoid building empty drivers
From: Arnd Bergmann <arnd@...db.de>
There are harmless warnings when compile testing the kernel with
CONFIG_TRIM_UNUSED_KSYMS:
drivers/pci/controller/dwc/pcie-al.o: no symbols
drivers/pci/controller/pci-thunder-ecam.o: no symbols
drivers/pci/controller/pci-thunder-pem.o: no symbols
The problem here is that the host drivers get built even when the
configuration symbols are all disabled, as they pretend to not be drivers
but are silently enabled because of the promise that ACPI based systems
need no drivers.
Add back the normal symbols to have these drivers built, and change the
logic to otherwise only build them when both CONFIG_PCI_QUIRKS and
CONFIG_ACPI are enabled.
As a side-effect, this enables compile-testing the drivers on other
architectures, which in turn needs the acpi_get_rc_resources()
function to be defined.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/pci/controller/Makefile | 7 ++++++-
drivers/pci/controller/dwc/Makefile | 7 ++++++-
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index e4559f2182f2..6d24a163033f 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -11,10 +11,13 @@ obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar.o pcie-rcar-host.o
obj-$(CONFIG_PCIE_RCAR_EP) += pcie-rcar.o pcie-rcar-ep.o
obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
+obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
+obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
obj-$(CONFIG_PCIE_XILINX_CPM) += pcie-xilinx-cpm.o
obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o
+obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
@@ -47,8 +50,10 @@ obj-y += mobiveil/
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.
-ifdef CONFIG_PCI
+ifdef CONFIG_ACPI
+ifdef CONFIG_PCI_QUIRKS
obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
obj-$(CONFIG_ARM64) += pci-xgene.o
endif
+endif
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a751553fa0db..ba7c42f6df6f 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -31,7 +31,12 @@ obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.
-ifdef CONFIG_PCI
+obj-$(CONFIG_PCIE_AL) += pcie-al.o
+obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
+
+ifdef CONFIG_ACPI
+ifdef CONFIG_PCI_QUIRKS
obj-$(CONFIG_ARM64) += pcie-al.o
obj-$(CONFIG_ARM64) += pcie-hisi.o
endif
+endif
--
2.29.2
Powered by blists - more mailing lists