[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <OSAPR01MB27370EBB65BF8B90D2B543AAC29A9@OSAPR01MB2737.jpnprd01.prod.outlook.com>
Date: Mon, 1 Mar 2021 14:58:10 +0000
From: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
CC: Rob Herring <robh+dt@...nel.org>, Arnd Bergmann <arnd@...db.de>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linux API <linux-api@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Chris Paterson <Chris.Paterson2@...esas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@...renesas.com>,
Phil Edworthy <phil.edworthy@...esas.com>,
"REE dirk.behme@...bosch.com" <dirk.behme@...bosch.com>,
Peter Erben <Peter.Erben@...bosch.com>
Subject: RE: [PATCH 2/7] clk: renesas: r8a77965: Add DAB clock
Hi Geert,
Thanks for your feedback!
> From: Geert Uytterhoeven <geert@...ux-m68k.org>
> Sent: 26 February 2021 08:45
> Subject: Re: [PATCH 2/7] clk: renesas: r8a77965: Add DAB clock
>
> Hi Fabrizio,
>
> On Thu, Feb 25, 2021 at 11:53 PM Fabrizio Castro
> <fabrizio.castro.jz@...esas.com> wrote:
> > This patch adds the DAB clock to the R8A77965 SoC.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
>
> Thanks for your patch!
>
> > --- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
> > +++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
> > @@ -250,6 +250,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[]
> __initconst = {
> > DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
> > DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
> > DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
> > + DEF_MOD("dab", 1016, R8A77965_CLK_S0D6),
>
> Unfortunately this bit is not documented in the R-Car Gen3 Hardware
> User's Manual, so I have to trust you on this.
>
> While it's not unusual that the same module on R-Car E3 and M3-N
> has different parent clocks, it does strike me as odd that S0D6 on M3-N
> runs at 133 MHz, while S3D1 on E3 runs at 266 MHz.
> Probably it doesn't matter that much, as your driver doesn't care
> about the actual clock rate.
I had the same concerns but we have received confirmation for this.
Hopefully an official document will be released soon.
Thanks,
Fab
>
> > DEF_MOD("scu-all", 1017, R8A77965_CLK_S3D4),
> > DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
> > DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
>
> Gr{oetje,eeting}s,
>
> Geert
>
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-
> m68k.org
>
> In personal conversations with technical people, I call myself a hacker.
> But
> when I'm talking to journalists I just say "programmer" or something like
> that.
> -- Linus Torvalds
Powered by blists - more mailing lists