| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210301133318.v2.4.I1483fac4c5ae4b2d7660290ff85d69945292618f@changeid>
Date: Mon, 1 Mar 2021 13:34:28 -0800
From: Douglas Anderson <dianders@...omium.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Rob Clark <robdclark@...omium.org>,
Alexandru M Stan <amstan@...omium.org>,
Stephen Boyd <swboyd@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Douglas Anderson <dianders@...omium.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 04/13] arm64: dts: qcom: Unify the sc7180-trogdor panel nodes
Let's avoid a bit of duplication by pushing this up to the trogdor.dtsi
file.
Signed-off-by: Douglas Anderson <dianders@...omium.org>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
---
(no changes since v1)
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 21 ++++---------------
.../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 19 ++++-------------
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 15 +++++++++++++
3 files changed, 23 insertions(+), 32 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 11269522da50..5efa04d0d256 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -12,23 +12,6 @@
#include "sc7180-trogdor.dtsi"
-/ {
- panel: panel {
- compatible = "boe,nv133fhm-n62";
- power-supply = <&pp3300_dx_edp>;
- backlight = <&backlight>;
- hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
-
- ports {
- port {
- panel_in_edp: endpoint {
- remote-endpoint = <&sn65dsi86_out>;
- };
- };
- };
- };
-};
-
&ap_sar_sensor {
semtech,cs0-ground;
semtech,combined-sensors = <3>;
@@ -58,6 +41,10 @@ ap_ts: touchscreen@10 {
};
};
+&panel {
+ compatible = "boe,nv133fhm-n62";
+};
+
&trackpad {
interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index bd2c783e0f2f..2b522f9e0d8f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -17,21 +17,6 @@
/ {
model = "Google Trogdor (rev1+)";
compatible = "google,trogdor", "qcom,sc7180";
-
- panel: panel {
- compatible = "auo,b116xa01";
- power-supply = <&pp3300_dx_edp>;
- backlight = <&backlight>;
- hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
-
- ports {
- port {
- panel_in_edp: endpoint {
- remote-endpoint = <&sn65dsi86_out>;
- };
- };
- };
- };
};
ap_ts_pen_1v8: &i2c4 {
@@ -53,6 +38,10 @@ ap_ts: touchscreen@10 {
};
};
+&panel {
+ compatible = "auo,b116xa01";
+};
+
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index b471503e415e..7341fe6e2c0b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -257,6 +257,21 @@ max98357a: audio-codec-0 {
#sound-dai-cells = <0>;
};
+ panel: panel {
+ /* Compatible will be filled in per-board */
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+
pwmleds {
compatible = "pwm-leds";
keyboard_backlight: keyboard-backlight {
--
2.30.1.766.gb4fecdf3b7-goog
Powered by blists - more mailing lists