[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210301133318.v2.3.Iddf6dc8102aa4fbc3847936226fc7bf2e2cd315c@changeid>
Date: Mon, 1 Mar 2021 13:34:27 -0800
From: Douglas Anderson <dianders@...omium.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Rob Clark <robdclark@...omium.org>,
Alexandru M Stan <amstan@...omium.org>,
Stephen Boyd <swboyd@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Douglas Anderson <dianders@...omium.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 03/13] arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards
The trackpad interrupt got renamed and also moved to a new GPIO on
newer boards. Let's do the move in the "trogdor.dtsi" file and then
undo it in the two old boards.
NOTE: since none of the new boards have device trees yet, this change
looks silly on its own but it will make sense after more boards are
supported.
Signed-off-by: Douglas Anderson <dianders@...omium.org>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
---
(no changes since v1)
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 14 ++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 16 ++++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 14 ++++++++------
3 files changed, 38 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 89e5cd29ec09..11269522da50 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -58,8 +58,22 @@ ap_ts: touchscreen@10 {
};
};
+&trackpad {
+ interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+&trackpad_int_1v8_odl {
+ pinmux {
+ pins = "gpio58";
+ };
+
+ pinconf {
+ pins = "gpio58";
+ };
+};
+
&ts_reset_l {
pinconf {
/* This pin is not connected on -rev0, pull up to park. */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 2cb522d6962e..bd2c783e0f2f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -68,6 +68,22 @@ &sdhc_2 {
status = "okay";
};
+&trackpad {
+ interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&trackpad_int_1v8_odl {
+ pinmux {
+ pins = "gpio58";
+ };
+
+ pinconf {
+ pins = "gpio58";
+ };
+};
+
/* PINCTRL - board-specific pinctrl */
&tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 47eed134c733..b471503e415e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -644,14 +644,14 @@ ap_tp_i2c: &i2c7 {
status = "okay";
clock-frequency = <400000>;
- trackpad@15 {
+ trackpad: trackpad@15 {
compatible = "elan,ekth3000";
reg = <0x15>;
pinctrl-names = "default";
- pinctrl-0 = <&trackpad_int_1v8_odl>;
+ pinctrl-0 = <&tp_int_odl>;
interrupt-parent = <&tlmm>;
- interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
vcc-supply = <&pp3300_fp_tp>;
@@ -1412,14 +1412,16 @@ pinconf-rx {
};
};
- trackpad_int_1v8_odl: trackpad-int-1v8-odl {
+ /* Named trackpad_int_1v8_odl on earlier revision schematics */
+ trackpad_int_1v8_odl:
+ tp_int_odl: tp-int-odl {
pinmux {
- pins = "gpio58";
+ pins = "gpio0";
function = "gpio";
};
pinconf {
- pins = "gpio58";
+ pins = "gpio0";
/* Has external pullup */
bias-disable;
--
2.30.1.766.gb4fecdf3b7-goog
Powered by blists - more mailing lists