Message-ID: <3e4edfaa-e90d-1889-cd05-41107e730c18@redhat.com>
Date:   Tue, 2 Mar 2021 08:09:07 -0800
From:   Tom Rix <trix@...hat.com>
To:     Lizhi Hou <lizhi.hou@...inx.com>, linux-kernel@...r.kernel.org
Cc:     Lizhi Hou <lizhih@...inx.com>, linux-fpga@...r.kernel.org,
        maxz@...inx.com, sonal.santan@...inx.com, michal.simek@...inx.com,
        stefanos@...inx.com, devicetree@...r.kernel.org, mdf@...nel.org,
        robh@...nel.org, Max Zhen <max.zhen@...inx.com>
Subject: Re: [PATCH V3 XRT Alveo 11/18] fpga: xrt: UCS platform driver


On 2/17/21 10:40 PM, Lizhi Hou wrote:
> Add UCS driver. UCS is a hardware function discovered by walking xclbin
What does UCS stand for ? add to commit log
> metadata. A platform device node will be created for it.
> UCS enables/disables the dynamic region clocks.
>
> Signed-off-by: Sonal Santan <sonal.santan@...inx.com>
> Signed-off-by: Max Zhen <max.zhen@...inx.com>
> Signed-off-by: Lizhi Hou <lizhih@...inx.com>
> ---
>  drivers/fpga/xrt/include/xleaf/ucs.h |  24 +++
>  drivers/fpga/xrt/lib/xleaf/ucs.c     | 235 +++++++++++++++++++++++++++
>  2 files changed, 259 insertions(+)
>  create mode 100644 drivers/fpga/xrt/include/xleaf/ucs.h
>  create mode 100644 drivers/fpga/xrt/lib/xleaf/ucs.c
>
> diff --git a/drivers/fpga/xrt/include/xleaf/ucs.h b/drivers/fpga/xrt/include/xleaf/ucs.h
> new file mode 100644
> index 000000000000..a5ef0e100e12
> --- /dev/null
> +++ b/drivers/fpga/xrt/include/xleaf/ucs.h

This header is only used by ucs.c, so is it needed ?

could the enum be defined in ucs.c ?

> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Header file for XRT UCS Leaf Driver
> + *
> + * Copyright (C) 2020-2021 Xilinx, Inc.
> + *
> + * Authors:
> + *	Lizhi Hou <Lizhi.Hou@...inx.com>
> + */
> +
> +#ifndef _XRT_UCS_H_
> +#define _XRT_UCS_H_
> +
> +#include "xleaf.h"
> +
> +/*
> + * UCS driver IOCTL calls.
> + */
> +enum xrt_ucs_ioctl_cmd {
> +	XRT_UCS_CHECK = XRT_XLEAF_CUSTOM_BASE, /* See comments in xleaf.h */
> +	XRT_UCS_ENABLE,
no disable ?
> +};
> +
> +#endif	/* _XRT_UCS_H_ */
> diff --git a/drivers/fpga/xrt/lib/xleaf/ucs.c b/drivers/fpga/xrt/lib/xleaf/ucs.c
> new file mode 100644
> index 000000000000..ae762c8fddbb
> --- /dev/null
> +++ b/drivers/fpga/xrt/lib/xleaf/ucs.c
> @@ -0,0 +1,235 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Xilinx Alveo FPGA UCS Driver
> + *
> + * Copyright (C) 2020-2021 Xilinx, Inc.
> + *
> + * Authors:
> + *      Lizhi Hou<Lizhi.Hou@...inx.com>
> + */
> +
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include "metadata.h"
> +#include "xleaf.h"
> +#include "xleaf/ucs.h"
> +#include "xleaf/clock.h"
> +
> +#define UCS_ERR(ucs, fmt, arg...)   \
> +	xrt_err((ucs)->pdev, fmt "\n", ##arg)
> +#define UCS_WARN(ucs, fmt, arg...)  \
> +	xrt_warn((ucs)->pdev, fmt "\n", ##arg)
> +#define UCS_INFO(ucs, fmt, arg...)  \
> +	xrt_info((ucs)->pdev, fmt "\n", ##arg)
> +#define UCS_DBG(ucs, fmt, arg...)   \
> +	xrt_dbg((ucs)->pdev, fmt "\n", ##arg)
> +
> +#define XRT_UCS		"xrt_ucs"
> +
> +#define CHANNEL1_OFFSET			0
> +#define CHANNEL2_OFFSET			8
> +
> +#define CLK_MAX_VALUE			6400
> +
> +struct ucs_control_status_ch1 {
> +	unsigned int shutdown_clocks_latched:1;
> +	unsigned int reserved1:15;
> +	unsigned int clock_throttling_average:14;
> +	unsigned int reserved2:2;
> +};
Likely needs to be packed and/or the unsigned int changed to u32
> +
> +struct xrt_ucs {
> +	struct platform_device	*pdev;
> +	void __iomem		*ucs_base;
> +	struct mutex		ucs_lock; /* ucs dev lock */
> +};
> +
> +static inline u32 reg_rd(struct xrt_ucs *ucs, u32 offset)
> +{
> +	return ioread32(ucs->ucs_base + offset);
> +}
> +
> +static inline void reg_wr(struct xrt_ucs *ucs, u32 val, u32 offset)
> +{
> +	iowrite32(val, ucs->ucs_base + offset);
> +}
> +
> +static void xrt_ucs_event_cb(struct platform_device *pdev, void *arg)
> +{
> +	struct platform_device	*leaf;
> +	struct xrt_event *evt = (struct xrt_event *)arg;
> +	enum xrt_events e = evt->xe_evt;
> +	enum xrt_subdev_id id = evt->xe_subdev.xevt_subdev_id;
> +	int instance = evt->xe_subdev.xevt_subdev_instance;
> +
> +	switch (e) {
> +	case XRT_EVENT_POST_CREATION:
> +		break;
> +	default:
> +		xrt_dbg(pdev, "ignored event %d", e);
> +		return;
> +	}
this switch is a noop, remove
> +
> +	if (id != XRT_SUBDEV_CLOCK)
> +		return;
> +
> +	leaf = xleaf_get_leaf_by_id(pdev, XRT_SUBDEV_CLOCK, instance);
> +	if (!leaf) {
> +		xrt_err(pdev, "does not get clock subdev");
> +		return;
> +	}
> +
> +	xleaf_ioctl(leaf, XRT_CLOCK_VERIFY, NULL);
> +	xleaf_put_leaf(pdev, leaf);
> +}
> +
> +static void ucs_check(struct xrt_ucs *ucs, bool *latched)
> +{

checking but not returning status, change to returning int.

this function is called but xrt_ucs_leaf_ioctl which does return status.

> +	struct ucs_control_status_ch1 *ucs_status_ch1;
> +	u32 status;
> +
> +	mutex_lock(&ucs->ucs_lock);
> +	status = reg_rd(ucs, CHANNEL1_OFFSET);
> +	ucs_status_ch1 = (struct ucs_control_status_ch1 *)&status;
> +	if (ucs_status_ch1->shutdown_clocks_latched) {
> +		UCS_ERR(ucs,
> +			"Critical temperature or power event, kernel clocks have been stopped.");
> +		UCS_ERR(ucs,
> +			"run 'xbutil valiate -q' to continue. See AR 73398 for more details.");
This error message does not seem like it would be useful, please review.
> +		/* explicitly indicate reset should be latched */
> +		*latched = true;
> +	} else if (ucs_status_ch1->clock_throttling_average >
> +	    CLK_MAX_VALUE) {
> +		UCS_ERR(ucs, "kernel clocks %d exceeds expected maximum value %d.",
> +			ucs_status_ch1->clock_throttling_average,
> +			CLK_MAX_VALUE);
> +	} else if (ucs_status_ch1->clock_throttling_average) {
> +		UCS_ERR(ucs, "kernel clocks throttled at %d%%.",
> +			(ucs_status_ch1->clock_throttling_average /
> +			 (CLK_MAX_VALUE / 100)));
> +	}
> +	mutex_unlock(&ucs->ucs_lock);
> +}
> +
> +static void ucs_enable(struct xrt_ucs *ucs)
> +{
> +	reg_wr(ucs, 1, CHANNEL2_OFFSET);
lock ?
> +}
> +
> +static int
> +xrt_ucs_leaf_ioctl(struct platform_device *pdev, u32 cmd, void *arg)
> +{
> +	struct xrt_ucs		*ucs;
> +	int			ret = 0;
> +
> +	ucs = platform_get_drvdata(pdev);
> +
> +	switch (cmd) {
> +	case XRT_XLEAF_EVENT:
> +		xrt_ucs_event_cb(pdev, arg);
> +		break;
> +	case XRT_UCS_CHECK: {
brace not needed here
> +		ucs_check(ucs, (bool *)arg);
> +		break;
> +	}
> +	case XRT_UCS_ENABLE:
> +		ucs_enable(ucs);
> +		break;
> +	default:
> +		xrt_err(pdev, "unsupported cmd %d", cmd);
> +		return -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static int ucs_remove(struct platform_device *pdev)
> +{
> +	struct xrt_ucs *ucs;
> +
> +	ucs = platform_get_drvdata(pdev);
> +	if (!ucs) {

is this possible ?

Tom

> +		xrt_err(pdev, "driver data is NULL");
> +		return -EINVAL;
> +	}
> +
> +	if (ucs->ucs_base)
> +		iounmap(ucs->ucs_base);
> +
> +	platform_set_drvdata(pdev, NULL);
> +	devm_kfree(&pdev->dev, ucs);
> +
> +	return 0;
> +}
> +
> +static int ucs_probe(struct platform_device *pdev)
> +{
> +	struct xrt_ucs *ucs = NULL;
> +	struct resource *res;
> +	int ret;
> +
> +	ucs = devm_kzalloc(&pdev->dev, sizeof(*ucs), GFP_KERNEL);
> +	if (!ucs)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, ucs);
> +	ucs->pdev = pdev;
> +	mutex_init(&ucs->ucs_lock);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	ucs->ucs_base = ioremap(res->start, res->end - res->start + 1);
> +	if (!ucs->ucs_base) {
> +		UCS_ERR(ucs, "map base %pR failed", res);
> +		ret = -EFAULT;
> +		goto failed;
> +	}
> +	ucs_enable(ucs);
> +
> +	return 0;
> +
> +failed:
> +	ucs_remove(pdev);
> +	return ret;
> +}
> +
> +static struct xrt_subdev_endpoints xrt_ucs_endpoints[] = {
> +	{
> +		.xse_names = (struct xrt_subdev_ep_names[]) {
> +			{ .ep_name = XRT_MD_NODE_UCS_CONTROL_STATUS },
> +			{ NULL },
> +		},
> +		.xse_min_ep = 1,
> +	},
> +	{ 0 },
> +};
> +
> +static struct xrt_subdev_drvdata xrt_ucs_data = {
> +	.xsd_dev_ops = {
> +		.xsd_ioctl = xrt_ucs_leaf_ioctl,
> +	},
> +};
> +
> +static const struct platform_device_id xrt_ucs_table[] = {
> +	{ XRT_UCS, (kernel_ulong_t)&xrt_ucs_data },
> +	{ },
> +};
> +
> +static struct platform_driver xrt_ucs_driver = {
> +	.driver = {
> +		.name = XRT_UCS,
> +	},
> +	.probe = ucs_probe,
> +	.remove = ucs_remove,
> +	.id_table = xrt_ucs_table,
> +};
> +
> +void ucs_leaf_init_fini(bool init)
> +{
> +	if (init)
> +		xleaf_register_driver(XRT_SUBDEV_UCS, &xrt_ucs_driver, xrt_ucs_endpoints);
> +	else
> +		xleaf_unregister_driver(XRT_SUBDEV_UCS);
> +}

Powered by blists - more mailing lists