| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0242e4ab10acff9a7d71c2f956ba4624bf95add2.camel@gmail.com>
Date: Thu, 04 Mar 2021 10:59:55 +0100
From: Bean Huo <huobean@...il.com>
To: daejun7.park@...sung.com, Greg KH <gregkh@...uxfoundation.org>,
"avri.altman@....com" <avri.altman@....com>,
"jejb@...ux.ibm.com" <jejb@...ux.ibm.com>,
"martin.petersen@...cle.com" <martin.petersen@...cle.com>,
"asutoshd@...eaurora.org" <asutoshd@...eaurora.org>,
"stanley.chu@...iatek.com" <stanley.chu@...iatek.com>,
"cang@...eaurora.org" <cang@...eaurora.org>,
"bvanassche@....org" <bvanassche@....org>,
ALIM AKHTAR <alim.akhtar@...sung.com>
Cc: "linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
JinHwan Park <jh.i.park@...sung.com>,
Javier Gonzalez <javier.gonz@...sung.com>,
SEUNGUK SHIN <seunguk.shin@...sung.com>,
Sung-Jun Park <sungjun07.park@...sung.com>,
Jinyoung CHOI <j-young.choi@...sung.com>,
BoRam Shin <boram.shin@...sung.com>
Subject: Re: [PATCH v26 4/4] scsi: ufs: Add HPB 2.0 support
On Wed, 2021-03-03 at 15:29 +0900, Daejun Park wrote:
> +
> +static inline int ufshpb_get_read_id(struct ufshpb_lu *hpb)
> +{
> + if (++hpb->cur_read_id >= MAX_HPB_READ_ID)
> + hpb->cur_read_id = 0;
> + return hpb->cur_read_id;
> +}
> +
> +static int ufshpb_execute_pre_req(struct ufshpb_lu *hpb, struct
> scsi_cmnd *cmd,
> + struct ufshpb_req *pre_req, int
> read_id)
> +{
> + struct scsi_device *sdev = cmd->device;
> + struct request_queue *q = sdev->request_queue;
> + struct request *req;
> + struct scsi_request *rq;
> + struct bio *bio = pre_req->bio;
> +
> + pre_req->hpb = hpb;
> + pre_req->wb.lpn = sectors_to_logical(cmd->device,
> + blk_rq_pos(cmd-
> >request));
> + pre_req->wb.len = sectors_to_logical(cmd->device,
> + blk_rq_sectors(cmd-
> >request));
> + if (ufshpb_pre_req_add_bio_page(hpb, q, pre_req))
> + return -ENOMEM;
> +
> + req = pre_req->req;
> +
> + /* 1. request setup */
> + blk_rq_append_bio(req, &bio);
> + req->rq_disk = NULL;
> + req->end_io_data = (void *)pre_req;
> + req->end_io = ufshpb_pre_req_compl_fn;
> +
> + /* 2. scsi_request setup */
> + rq = scsi_req(req);
> + rq->retries = 1;
> +
> + ufshpb_set_write_buf_cmd(rq->cmd, pre_req->wb.lpn, pre_req-
> >wb.len,
> + read_id);
> + rq->cmd_len = scsi_command_size(rq->cmd);
> +
> + if (blk_insert_cloned_request(q, req) != BLK_STS_OK)
> + return -EAGAIN;
> +
> + hpb->stats.pre_req_cnt++;
> +
> + return 0;
> +}
> +
> +static int ufshpb_issue_pre_req(struct ufshpb_lu *hpb, struct
> scsi_cmnd *cmd,
> + int *read_id)
> +{
> + struct ufshpb_req *pre_req;
> + struct request *req = NULL;
> + struct bio *bio = NULL;
> + unsigned long flags;
> + int _read_id;
> + int ret = 0;
> +
> + req = blk_get_request(cmd->device->request_queue,
> + REQ_OP_SCSI_OUT | REQ_SYNC,
> BLK_MQ_REQ_NOWAIT);
> + if (IS_ERR(req))
> + return -EAGAIN;
> +
> + bio = bio_alloc(GFP_ATOMIC, 1);
> + if (!bio) {
> + blk_put_request(req);
> + return -EAGAIN;
> + }
> +
> + spin_lock_irqsave(&hpb->rgn_state_lock, flags);
> + pre_req = ufshpb_get_pre_req(hpb);
> + if (!pre_req) {
> + ret = -EAGAIN;
> + goto unlock_out;
> + }
> + _read_id = ufshpb_get_read_id(hpb);
> + spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
> +
> + pre_req->req = req;
> + pre_req->bio = bio;
> +
> + ret = ufshpb_execute_pre_req(hpb, cmd, pre_req, _read_id);
> + if (ret)
> + goto free_pre_req;
> +
> + *read_id = _read_id;
> +
> + return ret;
> +free_pre_req:
> + spin_lock_irqsave(&hpb->rgn_state_lock, flags);
> + ufshpb_put_pre_req(hpb, pre_req);
> +unlock_out:
> + spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
> + bio_put(bio);
> + blk_put_request(req);
> + return ret;
> +}
> +
> /*
> * This function will set up HPB read command using host-side L2P
> map data.
> - * In HPB v1.0, maximum size of HPB read command is 4KB.
> */
> -void ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
> +int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
> {
> struct ufshpb_lu *hpb;
> struct ufshpb_region *rgn;
> @@ -291,26 +560,27 @@ void ufshpb_prep(struct ufs_hba *hba, struct
> ufshcd_lrb *lrbp)
> u64 ppn;
> unsigned long flags;
> int transfer_len, rgn_idx, srgn_idx, srgn_offset;
> + int read_id = 0;
> int err = 0;
>
> hpb = ufshpb_get_hpb_data(cmd->device);
> if (!hpb)
> - return;
> + return -ENODEV;
>
> if (ufshpb_get_state(hpb) != HPB_PRESENT) {
> dev_notice(&hpb->sdev_ufs_lu->sdev_dev,
> "%s: ufshpb state is not PRESENT",
> __func__);
> - return;
> + return -ENODEV;
> }
>
> if (!ufshpb_is_write_or_discard_cmd(cmd) &&
> !ufshpb_is_read_cmd(cmd))
> - return;
> + return 0;
>
> transfer_len = sectors_to_logical(cmd->device,
> blk_rq_sectors(cmd-
> >request));
> if (unlikely(!transfer_len))
> - return;
> + return 0;
>
> lpn = sectors_to_logical(cmd->device, blk_rq_pos(cmd-
> >request));
> ufshpb_get_pos_from_lpn(hpb, lpn, &rgn_idx, &srgn_idx,
> &srgn_offset);
> @@ -323,18 +593,19 @@ void ufshpb_prep(struct ufs_hba *hba, struct
> ufshcd_lrb *lrbp)
> ufshpb_set_ppn_dirty(hpb, rgn_idx, srgn_idx,
> srgn_offset,
> transfer_len);
> spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
> - return;
> + return 0;
> }
>
> - if (!ufshpb_is_support_chunk(transfer_len))
> - return;
> + if (!ufshpb_is_support_chunk(hpb, transfer_len) &&
> + (ufshpb_is_legacy(hba) && (transfer_len !=
> HPB_LEGACY_CHUNK_HIGH)))
> + return 0;
>
> spin_lock_irqsave(&hpb->rgn_state_lock, flags);
> if (ufshpb_test_ppn_dirty(hpb, rgn_idx, srgn_idx,
> srgn_offset,
> transfer_len)) {
> hpb->stats.miss_cnt++;
> spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
> - return;
> + return 0;
> }
>
> err = ufshpb_fill_ppn_from_page(hpb, srgn->mctx, srgn_offset,
> 1, &ppn);
> @@ -347,28 +618,46 @@ void ufshpb_prep(struct ufs_hba *hba, struct
> ufshcd_lrb *lrbp)
> * active state.
> */
> dev_err(hba->dev, "get ppn failed. err %d\n", err);
> - return;
> + return err;
> + }
> +
> + if (!ufshpb_is_legacy(hba) &&
> + ufshpb_is_required_wb(hpb, transfer_len)) {
> + err = ufshpb_issue_pre_req(hpb, cmd, &read_id);
> + if (err) {
> + unsigned long timeout;
> +
> + timeout = cmd->jiffies_at_alloc +
> msecs_to_jiffies(
> + hpb->params.requeue_timeout_ms);
> +
> + if (time_before(jiffies, timeout))
> + return -EAGAIN;
> +
> + hpb->stats.miss_cnt++;
> + return 0;
> + }
> }
>
> - ufshpb_set_hpb_read_to_upiu(hpb, lrbp, lpn, ppn,
> transfer_len);
> + ufshpb_set_hpb_read_to_upiu(hpb, lrbp, lpn, ppn,
> transfer_len, read_id);
>
> hpb->stats.hit_cnt++;
> + return 0;
> }
BUG!!!
Please read HPB 2.0 Spec carefully, and check how to correctly use HPB
READ ID. you are assigning 0 for HPB write buffer. how can you expect
the HPB READ be paired???
HPB READ ID
• If this value is 0, then HPB READ ID mode is not used, in which case
the physical addresses, except for the first LBA, needed to read the
data should be calculated or searched for by the device. If this value
is not 0, then HPB READ ID mode is used, in which case the device
returns the data corresponding to the HPB entries that are bound to
the HPB READ ID value.
Bean
Powered by blists - more mailing lists