[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a52993f1-9477-4ed2-cfd6-b2cf35b24d10@ti.com>
Date: Thu, 11 Mar 2021 14:30:30 +0200
From: Grygorii Strashko <grygorii.strashko@...com>
To: Aswath Govindraju <a-govindraju@...com>
CC: Vignesh Raghavendra <vigneshr@...com>,
Lokesh Vutla <lokeshvutla@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Faiz Abbas <faiz_abbas@...com>, Sekhar Nori <nsekhar@...com>,
Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5 1/3] arm64: dts: ti: k3-j7200: Add gpio nodes
On 10/03/2021 18:19, Aswath Govindraju wrote:
> From: Faiz Abbas <faiz_abbas@...com>
>
> There are 4 instances of gpio modules in main domain:
> gpio0, gpio2, gpio4 and gpio6
>
> Groups are created to provide protection between different processor
> virtual worlds. Each of these modules I/O pins are muxed within the
> group. Exactly one module can be selected to control the corresponding
> pin by selecting it in the pad mux configuration registers.
>
> This group in main domain pins out 69 lines (5 banks). Add DT modes for
> each module instance in the main domain.
>
> Similar to the gpio groups in main domain, there is one gpio group in
> wakeup domain with 2 module instances in it.
>
> The gpio group pins out 72 pins (6 banks) of the first 85 gpio lines. Add
> DT nodes for each module instance in the wakeup domain.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@...com>
> Signed-off-by: Sekhar Nori <nsekhar@...com>
> Signed-off-by: Aswath Govindraju <a-govindraju@...com>
> ---
> arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 72 +++++++++++++++++++
> .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 34 +++++++++
> 2 files changed, 106 insertions(+)
>
Reviewed-by: Grygorii Strashko <grygorii.strashko@...com>
--
Best regards,
grygorii
Powered by blists - more mailing lists