[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YE/eQrBTAKtQ1cyR@pendragon.ideasonboard.com>
Date: Tue, 16 Mar 2021 00:22:58 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Jacopo Mondi <jacopo+renesas@...ndi.org>
Cc: Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Kieran Bingham <kieran.bingham@...asonboard.com>,
Rob Herring <robh+dt@...nel.org>,
linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/4] arm64: dts: renesas: eagle: Enable MAX9286
Hi Jacopo,
Thank you for the patch.
On Mon, Mar 15, 2021 at 05:30:26PM +0100, Jacopo Mondi wrote:
> From: Kieran Bingham <kieran.bingham@...asonboard.com>
>
> Enable the MAX9286 GMSL deserializer on the Eagle-V3M board.
>
> Connected cameras should be defined in a device-tree overlay or included
> after these definitions.
>
> Signed-off-by: Kieran Bingham <kieran.bingham@...asonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
> ---
> .../arm64/boot/dts/renesas/r8a77970-eagle.dts | 132 ++++++++++++++++++
> 1 file changed, 132 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> index 874a7fc2730b..d2f63cccc238 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -6,6 +6,8 @@
> * Copyright (C) 2017 Cogent Embedded, Inc.
> */
>
> +#include <dt-bindings/gpio/gpio.h>
> +
> /dts-v1/;
> #include "r8a77970.dtsi"
>
> @@ -188,6 +190,11 @@ i2c0_pins: i2c0 {
> function = "i2c0";
> };
>
> + i2c3_pins: i2c3 {
> + groups = "i2c3_a";
> + function = "i2c3";
> + };
> +
> qspi0_pins: qspi0 {
> groups = "qspi0_ctrl", "qspi0_data4";
> function = "qspi0";
> @@ -266,6 +273,131 @@ &rwdt {
> status = "okay";
> };
Could we keep the nodes alphabetically sorted ?
> +&csi40 {
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
This is already present in r8a77970.dtsi, you can drop it.
> +
> + port@0 {
> + reg = <0>;
Similarly, should we add port@0 in r8a77970.dtsi, with its reg property
?
> +
> + csi40_in: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&max9286_out0>;
> + };
> + };
> + };
> +};
> +
> +&i2c3 {
> + pinctrl-0 = <&i2c3_pins>;
> + pinctrl-names = "default";
> +
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + gmsl: gmsl-deserializer@48 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + compatible = "maxim,max9286";
> + reg = <0x48>;
> +
> + /* eagle-pca9654-max9286-pwdn */
> + enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
> +
> + /*
> + * Workaround: Hog the CAMVDD line high as we can't establish a
> + * regulator-fixed on the gpio_chip exposed by &gmsl due to
> + * circular-dependency issues.
> + */
> + camvdd-en-hog {
> + gpio-hog;
> + gpios = <0 0>;
> + output-low;
> + line-name = "CAMVDD_EN";
> + };
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + max9286_in0: endpoint {
> + };
Shouldn't we leave out empty endpoints, and add them to the overlays
instead ? Endpoints describe links, so they shouldn't exist on their
own.
With these minor issues addressed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> + };
> +
> + port@1 {
> + reg = <1>;
> + max9286_in1: endpoint {
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + max9286_in2: endpoint {
> + };
> + };
> +
> + port@3 {
> + reg = <3>;
> + max9286_in3: endpoint {
> + };
> + };
> +
> + port@4 {
> + reg = <4>;
> + max9286_out0: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&csi40_in>;
> + };
> + };
> + };
> +
> + i2c-mux {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + status = "disabled";
> + };
> +
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> +
> + status = "disabled";
> + };
> +
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> +
> + status = "disabled";
> + };
> + };
> + };
> +};
> +
> &scif0 {
> pinctrl-0 = <&scif0_pins>;
> pinctrl-names = "default";
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists