linux-kernel - Re: [PATCH v3] mfd: ntxec: Support for EC in Tolino Shine 2 HD

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210315081231.GX701493@dell>
Date:   Mon, 15 Mar 2021 08:12:31 +0000
From:   Lee Jones <lee.jones@...aro.org>
To:     Andreas Kemnade <andreas@...nade.info>
Cc:     j.neuschaefer@....net, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] mfd: ntxec: Support for EC in Tolino Shine 2 HD

On Sat, 13 Mar 2021, Andreas Kemnade wrote:

> Add the version of the EC in the Tolino Shine 2 HD
> to the supported versions. It seems not to have an RTC
> and does not ack data written to it.
> The vendor kernel happily ignores write errors, using
> I2C via userspace i2c-set also shows the error.
> So add a quirk to ignore that error.
> 
> PWM can be successfully configured despite of that error.
> 
> Signed-off-by: Andreas Kemnade <andreas@...nade.info>
> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@....net>
> ---
> Changes in v3:
> - remove have_rtc variable
> - rename subdevices again
> 
> Changes in v2:
> - more comments about stacking regmap construction
> - fix accidential line removal
> - better naming for subdevices
>  drivers/mfd/ntxec.c       | 55 ++++++++++++++++++++++++++++++++++++---
>  include/linux/mfd/ntxec.h |  1 +
>  2 files changed, 53 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mfd/ntxec.c b/drivers/mfd/ntxec.c
> index 957de2b03529..ab6860ef3e9a 100644
> --- a/drivers/mfd/ntxec.c
> +++ b/drivers/mfd/ntxec.c
> @@ -96,6 +96,38 @@ static struct notifier_block ntxec_restart_handler = {
>  	.priority = 128,
>  };
>  
> +static int regmap_ignore_write(void *context,
> +			       unsigned int reg, unsigned int val)
> +
> +{
> +	struct regmap *regmap = context;
> +
> +	regmap_write(regmap, reg, val);
> +
> +	return 0;
> +}
> +
> +static int regmap_wrap_read(void *context, unsigned int reg,
> +			    unsigned int *val)
> +{
> +	struct regmap *regmap = context;
> +
> +	return regmap_read(regmap, reg, val);
> +}
> +
> +/*
> + * Some firmware versions do not ack written data, add a wrapper. It
> + * is used to stack another regmap on top.
> + */
> +static const struct regmap_config regmap_config_noack = {
> +	.name = "ntxec_noack",
> +	.reg_bits = 8,
> +	.val_bits = 16,
> +	.cache_type = REGCACHE_NONE,
> +	.reg_write = regmap_ignore_write,
> +	.reg_read = regmap_wrap_read
> +};
> +
>  static const struct regmap_config regmap_config = {
>  	.name = "ntxec",
>  	.reg_bits = 8,
> @@ -104,16 +136,22 @@ static const struct regmap_config regmap_config = {
>  	.val_format_endian = REGMAP_ENDIAN_BIG,
>  };
>  
> -static const struct mfd_cell ntxec_subdevices[] = {
> +static const struct mfd_cell ntxec_subdev[] = {
>  	{ .name = "ntxec-rtc" },
>  	{ .name = "ntxec-pwm" },
>  };
>  
> +static const struct mfd_cell ntxec_subdev_no_rtc[] = {
> +	{ .name = "ntxec-pwm" },
> +};
> +
>  static int ntxec_probe(struct i2c_client *client)
>  {
>  	struct ntxec *ec;
>  	unsigned int version;
>  	int res;
> +	const struct mfd_cell *subdevs = ntxec_subdev;
> +	size_t n_subdevs = ARRAY_SIZE(ntxec_subdev);

This is a little confusing.  I had to re-read to figure it out.

In my mind, it would be clearer to explicitly set these in the
switch, rather than have a default which can be over-written.

>  	ec = devm_kmalloc(&client->dev, sizeof(*ec), GFP_KERNEL);
>  	if (!ec)
> @@ -138,6 +176,16 @@ static int ntxec_probe(struct i2c_client *client)
>  	switch (version) {
>  	case NTXEC_VERSION_KOBO_AURA:
>  		break;
> +	case NTXEC_VERSION_TOLINO_SHINE2:
> +		subdevs = ntxec_subdev_no_rtc;
> +		n_subdevs = ARRAY_SIZE(ntxec_subdev_no_rtc);
> +		/* Another regmap stacked on top of the other */
> +		ec->regmap = devm_regmap_init(ec->dev, NULL,
> +					      ec->regmap,
> +					      &regmap_config_noack);
> +		if (IS_ERR(ec->regmap))
> +			return PTR_ERR(ec->regmap);
> +		break;
>  	default:
>  		dev_err(ec->dev,
>  			"Netronix embedded controller version %04x is not supported.\n",
> @@ -181,8 +229,9 @@ static int ntxec_probe(struct i2c_client *client)
>  
>  	i2c_set_clientdata(client, ec);
>  
> -	res = devm_mfd_add_devices(ec->dev, PLATFORM_DEVID_NONE, ntxec_subdevices,
> -				   ARRAY_SIZE(ntxec_subdevices), NULL, 0, NULL);
> +	res = devm_mfd_add_devices(ec->dev, PLATFORM_DEVID_NONE,
> +				   subdevs, n_subdevs,
> +				   NULL, 0, NULL);
>  	if (res)
>  		dev_err(ec->dev, "Failed to add subdevices: %d\n", res);
>  
> diff --git a/include/linux/mfd/ntxec.h b/include/linux/mfd/ntxec.h
> index 361204d125f1..26ab3b8eb612 100644
> --- a/include/linux/mfd/ntxec.h
> +++ b/include/linux/mfd/ntxec.h
> @@ -33,5 +33,6 @@ static inline __be16 ntxec_reg8(u8 value)
>  
>  /* Known firmware versions */
>  #define NTXEC_VERSION_KOBO_AURA	0xd726	/* found in Kobo Aura */
> +#define NTXEC_VERSION_TOLINO_SHINE2 0xf110 /* found in Tolino Shine 2 HD */
>  
>  #endif

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog